Do Brophy Camper Tie Downs HSAB Fit 2007 Ford F-150 Short Bed

Question

Question:

Need recommended tie downs for 2007 f-150 6 1/2 ft. bed Brophy?

asked by: John J

0

Expert Reply:

The Brophy Camper Tie Downs part # HSAB that you referenced will fit and work well on your 2007 Ford F-150 6-1/2 foot bed. We had a customer with your exact truck leave a review for these and they said they worked great. The hardware kit you'll also need is the part # TDHP.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The Brophy Clamp On Camper Tie-Downs #HSAB do not have a max weight capacity rating. So you will be restricted only by the payload of your truck. You may also be interested in the Brophy Basic Turnbuckles w/ Hardware for Camper Tie-Downs - 3,000…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 3

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion…

view full answer...

Answer 4

I'm assuming your 2024 F-250 has the 6-3/4' bed. If that is correct, the right tie-downs are in fact the #TLF3008 and #TL77CR. TorkLift has accounted for the bed access steps on the 2024 model and confirmed these will fit your truck.

view full answer...

Answer 5

So for your set up, a 2021 Ram 2500 short bed with the RamBoxes, you will need to use a Sidewinder in order to have the clearance to tow a 5th wheel. The Goose Box doesn't move the pivot point and an offset ball just won't be enough…

view full answer...

Answer 6

The Air Lift Air Helper Spring Cradles #AL59DQ are not going to be compatible with the Air Lift LoadLifter 7500 XL Ultimate Air Helper Springs #AL57589 on your 2021 Ram 2500. This is due to the 7500 springs being larger in diameter than the 5000…

view full answer...

Answer 7

Hey Robert, sorry it can be a bit confusing navigating all those facets for the camper tie downs, but I did go ahead and find those tie downs you were looking for. For the front, you'll want the TorkLift Camper Tie-Downs #TL87CR (TorkLift…

view full answer...

Answer 8

Yes you can absolutely use the HappiJac Qwik-Load Turnbuckles for Camper Tie-Downs #LC182895 with your TorkLift tie downs.

view full answer...

Answer 9

The proper extension for your setup would be the one that allows you to have clearance of your hitch mounted accessory and also allows you to still be able to pull the steps down. If the receiver tube sticks out past the camper too far then you…

view full answer...

Answer 10

I have two options that will allow for you to extend the connection point between your truck and trailer. The best option for you will depending on the gross trailer weight (GTW) and tongue weight (TW) of your trailer. As long as the GTW and TW of…

view full answer...

Answer 11

The primary advantage of frame-mounted camper tie-downs like the TorkLift #TLF2012A and #TLF3001A, which are designed to fit your Ford F-350 if it has the 6-3/4 foot bed without a step/board underneath and a factory hitch, is the stability they…

view full answer...

Answer 12

Yes, the #TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the #TLD3112 if you have the factory hitch or #TLR3510 if you have the TorkLift SuperHitch Magnum 30K.

view full answer...

Do Brophy Camper Tie Downs HSAB Fit 2007 Ford F-150 Short Bed

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching