Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Keep your outboard motor safe and secure with this heavy-duty, easy-to-use lock. Mounts on most outboard motors.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
AJ: What's up everybody It's AJ with etrailer.com. Today, we're going to be checking out this outboard motor lock from Fulton, splits into two different pieces. You have the top and these cutouts that are going to go around the handles of the clamps that hold your motor to the back of your boat. And you got the foam padding, it's going to be kind of a sound dampener. That way it doesn't make a whole bunch of noise when you're driving around with it on your trailer. This isn't going to be rattling around.
You just put the bottom part on there, then make sure you line out the cutouts with the handles, and make sure the handles are turned to the side as well, that way they fit in the two metal bars. There you go. And then you just push it together. It's all locked up and nobody can mess with it.So you've probably seen a couple of different ways to lock your motor to your boat. I know I saw on the handles, they got the little holes in there.
You kind of twist them together and run a padlock through the middle. That's easy, it works, but also those handles are easy to break. So one of that hole could break off and you can't use a lock on one of the sides and that's kind of useless then. This one is just a better overall system compared to that and a cable lock that kind of just wraps around. You have to find where to wrap it and where to attach it.
This easily just goes over those handles, pushes together, and you're done.Looking down at the comments section, we see a lot of our customers really enjoy this lock. They say it's really helped them out. One, in particular, said that they actually had to replace a lock because somebody did try to steal their motor, but the lock held up. They just damaged the outside a little bit, but their motor was still there when they came back. Now obviously no lock is perfect.
So it's not the end-all be-all solution to no one ever taking your motor. But I think it's going to keep people from messing with yours just by looking at it.I see the steel bar on there and go, "Nah, I'm good. I'm going to go ahead and get the bolt cutters and do something a little bit easier." Does come with a set of keys so you can remove it easily whenever you need to. But I don't see any reason why you need to do that unless you need to do maintenance on it or take it into the shop. Otherwise, I would just leave his bar on there all the time, better safe than sorry.All in all, I really like the lock. It's nice and sturdy. It's not going to pop off, not going to rattle off, and people aren't going to mess with it. I also like it because it's custom made for this application. It's not just a cable lock you're repurposing or a padlock that can be use on anything. I mean, that's great. It can be, but I like that it's made for this. That way it's going to stay on this and people are going to stay away from your motor. Thanks for hanging out. I hope this helped.
Average Customer Rating: 4.4 out of 5 stars (22 Customer Reviews)
Keep your outboard motor safe and secure with this heavy-duty, easy-to-use lock. Mounts on most outboard motors.So I put two pictures my old one and the new one. That’s why I bought the second one because I liked the first one so much. Perfect product keep up the good work.
etrailer has been superb as an equipment partner. They are prompt, responsive and easy to communicate with. The Fulton lock is just a lock but unfortunately, it is made in China so it’s durability and integrity are both suspect. I have tried diligently to avoid any Chinese made safety gear for my sailboat and family.
Paul
4/5/2023
So far, quite nicely with no apparent problems.
Works great for my 15hp motor. The foam is perfect to prevent rattle noise. eTrailer.com is such a great retailer. Fast shipping and awesome communication. Much preferred over subscription based retailers.
This boat lock is easy to install and looks great. It keeps my motor secure.
It is heavier than I thought for an other wise light boat. That plus I was concerned it would rattle making boat noisy for fishing. So, I haven't used it yet after having it for a year. I went back to a cable and padlock in the warm months and put motor inside for the winter. I may try it next season since I already have it.
Lock just fit in otherwise awkward outboard space.
5 pole connector cover is great, surprisingly tough to find. Now if you had the equivalent for the trailer side of the connector that would rate an excellent
I have purchased products from e-trailer more than once and am very happy with the products and the service provided. Good value and shipping time is very good as well. I will definitely use e-trailer again.
Had to shift my motor slightly to one side to get it on but no big issue. Works great. I do hope the keys are all different so another owner if one of these locks can’t use it on mine. What say you?
etrailer is a great company to deal with. Courteous, efficient and a great selection of products to choose from are just a few of the benefits of ordering what you need from them.
Great does what designed to do. thanks
Ralph S.
8/16/2020
Its great. Does the job. Easy to put on and off with key. Just sits there quietly and does what its supposed to. Bought this because the original one was damaged by someone trying to steal my motor. They were unsuccessful, it did the job. Great product.
nice lock, rattle free, motor is still on the boat, peace of mind.
Does the job, average build and ease of use. Motor is still in my possession, so….
Je suis très satisfait du produit.
Livraison très rapide.
Merci Beaucoup...
Translation-
I am very satisfied with the product.
Very fast delivery.
Thank you very much...
Great seller and great product
Ordered on 8/10/17. Told on 8/10/17 product would ship in 7 days. Product actually shipped on 9/5/2017 and arrived 9/11/2017. A month not a week. Product is fine.
Nobody that I know of has tried to steal my motor so I guess it’s working.
Just put this on my 97 Suzuki DT25C and it fits perfect. Just what I was looking for.
Looks like a Quality item.
works great would be better if it was a little tighter to allow for smaller motors or screws
Do you have a question about this Boat Motor Accessory?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Dedina
9/9/2020
Still perfect.