NOCO GENPRO On-Board Battery Charger - AC to DC - Waterproof - 1 Bank - 12V - 10 Amp

NOCO Battery Charger - NOC44FR

Submersible, on-board smart charger draws power from a wall outlet to charge and maintain a 12V battery at 10-amps. Fully-sealed, waterproof construction is ideal for marine applications. Saltwater tested and ignition protected for safety.

Features:

• On-board AC-to-DC smart charger quickly charge and maintain a 12V battery
  • Perfect for boats, trolling motors, generators, electric vehicles, and industrial equipment
• Battery bank provides full charge output even with low or varying AC current input
• Multiple battery profiles let you charge a variety of battery types
  • 12V Modes - normal, AGM, and lithium-ion,
  • Force mode - charge dead batteries below 1-volt
• Multi-stage charging algorithm charges 2x faster than traditional chargers without overcharging
  • Analyzes battery condition to provide a customized charge
  • Built-in battery desulfator restores lost battery capacity
• Heavy-duty 3/8" eyelet connectors provide maximum contact with terminals
  • Built-in 15-amp fuses protect electronics from dangerous overloads
• Completely sealed, waterproof design is fully submersible - perfect for marine applications
  • Tested to resist saltwater corrosion
• AC port plug (sold separately) creates a connection point for easy access to AC power

Specs:

• Application: 12V batteries up to 230 amp-hours
• Battery types supported: wet cell, gel cell, AGM, enhanced flooded, maintenance-free, and Lithium-ion
  • Lithium-ion batteries must have bettery management systems (BMS)
• Number of battery banks: 1
• Maximum charging amperage: 10 amps
• Eyelet cable length: 72"
• AC cable length: 72"
• Working voltage: 120 - 240 VAC (50 - 60 Hz)
• Maximum power consumption: 150 watts
• Low voltage detection rating: 1-volt
• IP rating: 68
• Dimensions: 5-13/16" long x 5-5/8" wide x 2-13/16" thick
• Weight: 4 lbs
• 3-Year limited warranty

The rugged NOCO Genius GENPRO series on-board smart charger quickly charges and maintains your 12-volt lead-acid or lithium-ion battery. A single battery bank efficiently charges deep cycle and starter batteries up to 230 amp-hours. It's great for boats, trolling motors, generators, and a wide range of electric vehicles and industrial equipment. With a fully submersible design, this smart charger was built to handle harsh marine environments, while keeping your batteries in peak condition.

User-Friendly Interface with LED Indicators

This Genius smart charger was designed to provide a simple, user-friendly experience. The mode button allows you to easily cycle through the unit's charge settings. Back-lit LED indicators let you verify that the unit is operating correctly, and they allow it to be easily operated at night. These indicators signal the unit's charge status, selected charging mode, and alert you to potential performance issues or errors.

These indicators allow you to quickly identify a problem with the battery or connection. So you don't have to waste time guessing if the battery voltage is too high or too low for your selected mode, or worry about damage from a reversed polarity connection to a battery.

4 Battery Charging Modes for 12V Batteries

This Genius smart charger has 4 selectable charging modes that let you quickly switch between charging different lead-acid and lithium-ion battery types. Traditional battery chargers generally only work with a specific battery type, like lithium-ion or AGM batteries, or only in special circumstances like charging in cold environments. This NOCO charger gives you the versatility to tackle different battery types and charging situations in one charger.

The charger works with 12V wet cell, gel cell, enhanced flooded, calcium, maintenance free, AGM, and lithium-ion batteries with battery management systems (BMS). A built-in battery desulfator restores lost capacity to sulfated and old batteries.

Heavy-Duty Eyelet Connectors

A set of 3/8" eyelets connect the charger to your battery. Over-molded connection points stand up to heavy usage and keep connections safe from the elements. Built-in 15-amp MINI fuses protect each connection against dangerous overcurrent.

Quickly Charge and Maintain Batteries from 120V to 240V AC Power Source

This Genius charger plugs into an available wall outlet to quickly charge and maintain multiple batteries. High-frequency switch-mode technology converts AC power into safe DC power to fully charge batteries. An onboard microcomputer monitors and controls this charging process to minimize power loss and maximize efficiency. Included hardware lets you mount the unit in an enclosed compartment, garage, or workspace.

The table above provides a quick reference for how long it will take the unit to charge batteries with various amp-hours.

Rugged Submersible Design

This on-board charger was built to handle extreme marine conditions. The unit has an IP68 rating, which means it can handle being fully submerged in water, and it's protected against solid particles like dust or sand. Its ignition protected for safe and worry-free operation around marine engine compartments and fuel tank spaces. Saltwater won't cause issues either. The charger has been thoroughly tested to resist corrosion.

The housing is made from tough Lexan resin that protects the internal electronics against vibration and impacts. The unit can handle being dropped, kicked over, and just about anything else your day brings.

AC Port Plug for Plug-and-Play Charging

Available AC port plugs (sold separately) from NOCO let you easily setup your GENPRO series charger for plug-and-play charging with any extension cord. The plug creates a "pass through" AC charging port on a surface, so you can quickly connect to the charger when it's mounted inside a compartment on a truck, boat, trailer or RV. This allows you to easily access the charger for charging engine block heaters, trolling motors, batteries, and other equipment. A snap-fit cap creates a watertight seal to protect the connection whenever you're done.

GENPRO10X1 NOCO Genius GENPRO On-Board Marine Smart Battery Charger - AC to DC - Waterproof - 1 Bank - 12V - 10 Amp

Installation Details 

Alternate Instructions