Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

See what our Experts say about this Roadmaster Base Plates

• Roadmaster Base Plates for Falcon 2 Tow Bar on 2014 Honda CR-V
  For your 2014 Honda CR-V you can use Roadmaster EZ4 Base Plate kit # RM-521567-4, the one you referenced, along with your Roadmaster Falcon 2 Tow Bar. The linked video shows you installation of these base plates on a 2014 CR-V. Flat towing also requires other parts in addition to the tow bar and base plates. The linked article explains each in detail. Those items are safety cables, a wiring/lighting kit, a supplementary braking system for the CR-V and often a high/low hitch adapter to...
  view full answer...
• Will Roadmaster Falcon 2 Tow Bar Work with EZ4 Roadmaster Base Plate Kit
  Yes, your Roadmaster Falcon 2 part # RM-520 will work with the Roadmaster EZ4 base plates part # RM-521567-4 that you referenced. I attached an install video for the base plate kit for you to check out as well. For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector...
  view full answer...
• Recommended Flat Towing Set Up for a 2012 Honda CR-V EX
  Yes, the Roadmaster StowMaster Tow Bar item # RM-501 is compatible with the Roadmaster Crossbar-Style Base Plate Kit item # RM-521567-4. This base plate is confirmed to fit your 2012 Honda CR-V EX and would be a great set up. I have listed some other parts you will need to flat tow your Honda below along with any installation videos we may have of the parts referenced: Safety Chains - RoadMaster 68" Single Hook, Coiled Safety Cables item # RM-643 Wiring Harness - Roadmaster Diode 7-Wire...
  view full answer...
• Recommended Parts For Flat Towing a 2013 Honda CR-V With a Motorhome That Has Sterling Tow Bars
  To attach your 2013 Honda CR-V to your Roadmaster Sterling All Terrain, Non-Binding Tow Bar # RM-576 you will need the Roadmaster Crossbar-Style Base Plate Kit # RM-521567-4. The Quick Disconnect Crossbar Assembly # 910021-00 is needed to connect to the crossbar base plate. If you are missing the 7-Way Cable # RM-98146-7 or Safety Cables # RM-645 they are available. Also available is the RoadMaster Nighthawk All Terrain and Sterling All Terrain Towing Combo Kit # RM-9284-2 to get all...
  view full answer...
• Roadmaster Base Plate Kit Recommendation for 2014 Honda CR-V
  Honda made enough changes to the CR-V between the 2004 and 2014 years that Roadmaster had to create a new base plate kit fit. So you would need to upgrade to a new base plate kit like the part # RM-521567-4 which is a confirmed fit and will work well. I attached an install video for this kit for you to check out as well.
  view full answer...
• Parts Needed to Flat Tow a 2012 Honda CR-V All-Wheel Drive
  We don't have a specific package deal because so many vehicles require different components to flat tow but I can recommend some part you'll need specifically for your 2012 Honda CR-V. I've also attached several articles that might be helpful to you. For starters, you mentioned a Roadmaster tow bar like the Falcon 2 # RM-520 and the Falcon All Terrain # RM-522. Both are excellent tow bars, the main difference being that the All Terrain is designed to make disconnecting easier on uneven...
  view full answer...
• How to Get Need Replacement Arms for Roadmaster Base Plates
  Yes, you can get new replacement arms for your Roadmaster Base Plates from, # RM-ARMS. Follow the link and then select "Installation Details" that is linked, which is actually a form that needs to be filled out to ensure the new replacement arms will fit. The part number that you linked to, # RM-576 is for the Roadmaster Sterling Tow Bar. I am guessing you probably have the Roadmaster Crossbar-Style Base Plate Kit, # RM-521567-4 for your 2013 Honda CR-V. Please verify before ordering.
  view full answer...
• Recommended Parts For Flat-Towing 2014 Honda CR-V With Reese Tow Bar
  We do have just what you are looking for to tow your 2014 Honda CR-V. I recommend the Roadmaster Base Plates, part # RM-521567-4. Since you said you have the Reese Tow Bar 74950, you will also need the adapter that allows you to use the Roadmaster base plates, # RM-521567-4 with your tow bar. To order the adapter you will need part # RM-025. If you plan on using the removable Roadmaster brackets you will also need the Quick Disconnect Kit, part # RM-201. To wire the lighting on your...
  view full answer...
• etrailer SD Non-Binding Tow Bar Compatibility With A 2014 Honda CR-V
  The etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR you referenced can be compatible with your 2014 Honda CR-V, you'll just need to use compatible base plates. This tow bar was designed specifically to be compatible with crossbar-style Roadmaster base plates, so you would need the Roadmaster Crossbar-Style Base Plate Kit # RM-521567-4. This tow bar features telescoping arms and non-binding latches to make connecting/disconnecting on any terrain a breeze....
  view full answer...
• Parts Needed to Flat Tow a 2012 Honda CR-V Behind a Motor Home
  I will be happy to help you with the parts you will need to start the next chapter in your lives. There are at least 5 things you will need to flat tow your 2012 Honda CR-V: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates the most popular option are the Roadmaster EZ4 base plates # RM-521567-4. I have linked a video showing how these base plates install. For a compatible tow bar the most popular option is the Falcon 2 # RM-520. I have linked a...
  view full answer...
• Installation Instruction Link for Roadmaster EZ4 Base Plates on a 2014 Honda CR-V
  Yes, we do have the instructions for the EZ4 base plates # RM-521567-4 for your 2014 Honda CR-V. I have included a link to them here. There is also a link to them from their product page. And I have included a link to a video showing installation that should also help.
  view full answer...
• Does Battery of 2014 Honda CRV Need to Be Disconnected to Flat Tow Vehicle Behind Motorhome
  There's no need to disconnect the battery. Most supplemental braking system need battery power available in order to operate. According to the recreational towing procedures listed in the owner's manual, if you'll be towing more than 8 hours a day, they recommend removing one or two fuses (depending on how your vehicle's equipped) to prevent the battery from being discharged. It probably wouldn't be a bad idea to do this regardless of how long you're flat towing. If your version of the...
  view full answer...
• Is Brake Light Relay Needed When Flat-Towing 2013 Honda CR-V
  The Roadmaster Brake-Lite Relay Kit, part # RM-88400 is used when you have combined lighting on your towed vehicle and want to use a supplemental brake system. The easiest way to find out if you need a relay is to turn the engine off and when pushing the brake pedal see if the brake lights come on. If they do, then a brake relay switch is needed. from my research it does not appear you need a brake light relay on your CR-V, but you can check to make sure. When towing your CR-V, the Roadmaster...
  view full answer...
• Are etrailer Base Plates Compatible with a Roadmaster Stowmaster Tow Bar
  I have a solution for you, but the etrailer Base Plates # e98955 are not compatible with a Roadmaster Stowmaster # RM-501 tow bar; the Stowmaster is only compatible with Roadmaster EZ, EZ2, EZ4, XL, and Classic vehicle specific base plates. For this reason, in order to use the Roadmaster Stowmaster # RM-501 you will need to use the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # RM-521567-4 on your 2013 Honda CR-V. This tow bar and base plate kit does not come with safety cables,...
  view full answer...
• Parts Needed to Flat Tow a 2014 Honda CR-V Behind a Motor Home with a Stowmaster Tow Bar
  The correct base plates for the 2014 Honda CR-V are # RM-521567-4 and they are compatible with the Stowmaster tow bar. The base plates you referenced, # 521190-1, are for a Honda Fit and would not work on your CR-V. The Honda CR-V is one of the more popular vehicles to flat tow. Just be sure to consult the vehicle owners manual for specific information on flat towing it. In addition to the base plates and tow bar you will also need safety cables, # RM-643. The coiled design helps keep...
  view full answer...
• Recommended Base Plate for a 2014 Honda CR-V
  I sure can. The Roadmaster StowMaster 5000 Tow Bar like our item # RM-501 uses a crossbar style base plate. The correct one for your 2014 Honda CR-V is the Roadmaster Crossbar-Style Base Plate Kit item # RM-521567-4. I have linked an installation video below to help you get it set up. I have also attached the instructions. Some other parts you will need to flat tow your 2014 Honda CR-V are listed here: Wiring Harness - Wiring Harness - Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring...
  view full answer...
• Difference Between Roadmaster EZ4 and EZ5 Base Plates for 2014 Honda CR-V
  As you mentioned in your question, both the Roadmaster EZ4 # RM-521567-4 and EZ5 # RM-521567-5 Base Plate Kits are confirmed to fit your 2014 Honda CR-V. The primary difference between the two models is that the EZ5 does not use a quick-connect crossbar to attach to the tow bar. This will in turn provide a cleaner, less obtrusive look. The drawback, however, and why I tend to recommend the EZ4 model, is that the design will not accommodate many accessories that mount to the crossbar like...
  view full answer...
• Which Roadmaster Base Plate Kit for 2013 Honda CR-V is Compatible with Stowmaster Tow Bar
  We have a Roadmaster base plate kit that fits your Stowmaster directly with the part # RM-521567-4 but the # RM-521567-5 only works with tow bars that slide into a hitch and your Stowmaster # RM-501 connects to a hitch ball instead so it would not work.
  view full answer...
• How To Use Roadmaster Falcon All Terrain Tow Bar On a 2014 Honda CR-V
  There are two Roadmaster Base Plate Kits available for a 2014 Honda CR-V, the Roadmaster Crossbar-Style Base Plate Kit part # RM-521567-4 and the Roadmaster Direct-Connect Base Plate Kit part # RM-521567-5. In order to use the Roadmaster Falcon All Terrain Tow Bar part # RM-522 with the Crossbar-Style Base Plate Kit you will need the Quick Disconnect Crossbar Assembly part # 910021-00. There won't be an adapters required to use the Direct-Connect Base Plate Kit with the Roadmaster Falcon...
  view full answer...
• Base Plates and Other Equipment Needed to Flat Tow 2013 Honda CR-V Behind RV
  The Roadmaster # RM-521567-4 base plates you mentioned would be a fine choice. When everything's installed, the towbar itself needs to be 3 inches +/- of level. The base plates will be at 18-1/2 inches off the ground when installed (assuming your CRV is running the stock tire size and is at stock ride height). Because the Stowmaster is a car-mounted towbar, you'll need to use a ball mount whose rise or drop places the trailer ball within 3 inches of 18-1/2 inches from the ground. So, simply...
  view full answer...
• Parts Needed to Flat Tow a 2014 Honda CR-V Behind an RV
  The Roadmaster EZ4 base plates # RM-521567-4 for your 2014 Honda CR-V are compatible with more tow bars and accessories that the EZ5 so I do recommend the EZ4. I have included a link to a video showing an example installation for you. Since ease of hookup is important I recommend the Falcon 2 tow bar # RM-520. Connecting or disconnecting from the vehicle when at a little bit of an angle or on slightly uneven ground is easier with this tow bar compared to models with fewer features. Or,...
  view full answer...
• Replacement Arms for Roadmaster Base Plate Kits
  If your 2013 Honda CR-V has the Roadmaster EZ4 Base Plate Kit # RM-521567-4, you simply need to write in "521567-4" as the model number. It sounds like you have all the rest of the needed information on the form you need to fill out on the Roadmaster Replacement Arms for Base Plate Kits # RM-ARMS product page. If so, you can attempt to order them without the date code; just be certain all the other information is correct and you note that the date code was not visible. You can also contact...
  view full answer...
• Base Plates And Flat-Towing Equipment Needed For 2013 Honda CR-V
  The base plates I recommend that will work with your Falcon 5250 tow bar is the Roadmaster EZ4 Base Plate Kit, part # RM-521567-4. These will work with the adapters you have mounted on the arms in the photo you sent. You also need safety cables like part # RM-643. For tow bar wiring I recommend part # RM-15247. You will need to pull fuses per your owner's manual. You can simply flip a switch by using a fuse bypass like part # RM76511 for the number 19 ACC radio fuse and part # RM76512...
  view full answer...
  
• Parts Needed to Flat Tow a 2014 Honda CR-V Behind an RV
  Roadmaster base plates # RM-521559-4 fit the 2007 to 2011 Honda CR-V but not the 2014. The 2009 is part of the third generation of the CR-V and the 2014 is part of the fourth generation. The vehicle designs, while similar, are not the same and different enough to necessitate different base plates. The good news is that you can reuse your tow bar and safety cables and maybe the lighting and supplemental braking if you have it. But you will need new base plates for the 2014 model and you...
  view full answer...

Do you have a question about this Base Plate?