etrailer Ball Mount w/ Pre-Torqued 2" Ball - 2" Hitch - 4" Drop - 7,500 lbs

Video Transcript for Review of etrailer Pre Torqued Ball Mount - e77DR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at this etrailer Pre-Torqued Ball Mount for a two inch hitch receiver. Has a two inch diameter ball, offers a four inch drop or a two and three quarter inch rise and has a 7,500 pound gross towing weight capacity. Now this heavy duty ball mount will provide everything you need to embark on your towing journey with confidence. The ball mount itself will let you hook up your trailer to your tow vehicle. The shank right here is what'll slide into your vehicle's two inch hitch receiver and they do include this five eighths inch diameter pin and clip and that's designed to fit into the hitch pin hole when you slide this in your hitch receiver to secure it to your receiver, they include the pin and clip for that.

Now this ball mount does offer a four inch drop, like it is right there. And if you flip it over, change the ball around, it does offer a two and three quarter inch rise. And that measurement is measured from the top of the shank to the top of the ball platform. So you can see in the rise position, if you put a ruler on that, it's two and three quarter inch rise. If we flip it back over and measure the drop again, top of the ball platform, top of the shank, there's your four inch drop.

Now the two inch hitch ball right here provides the connection point for your trailer's coupler. As we mentioned, the ball is pre-torqued to the factory specs in the drop position. Now if you don't wanna remove this and put it in the rise, we do also sell this same ball mount with the ball torque in the rise position. And that's a part number E38NR. And we do sell that separately on our website.

Now this is a sturdy steel with rust resistant finishes. You can see the ball mount itself is a matte black powder coat over an e-coat. And then the ball is a nice looking black nickel plated hitch ball. And it's nice as the pin and clip they include is also matching black nickel finish on the pin and on the clip. Application is designed to slide into a two inch by two inch trailer hitch receiver.

Gross towing weight capacity, again is 7,500 pounds. Tongue weight capacity of 750 pounds. Again, ball diameter of two inches. And the last thing I wanna do is just give you the measurement from, the length of this ball mount goes from the center of the hitch pin hole to the center of the ball hole. So you can see if we hold a ruler on that, center to center, that's right at eight inches. But that should do it for the review on this etrailer Pre-Torqued Ball Mount for the two inch hitch receiver with the two inch diameter ball.