etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
(1318 reviews)
Price: $114.39
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Item # EBMK4
Our Price: $114.39
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (1318)
- Q & A (0)
- Videos (2)
- Photos
etrailer Trailer Hitch Ball Mount - EBMK4
- Fits 2 Inch Hitch
- Fixed Ball Mount
- Drop - 4 Inch
- Rise - 3 Inch
- 1-7/8 Inch Ball
- 2 Inch Ball
- Two Balls
- 6000 lbs GTW
- Class III
- Ball Mount Kit
- etrailer
- Steel Shank - Gloss Black
- Steel Ball
etrailer 4" Drop Ball Mount Kit
- Works with 2" x 2" trailer hitch receivers (class III)
- Kit Includes:
- (1) Ball mount with 2-3/4" rise or 4" drop (# 2753)
- Capacity: 7,500 lbs GTW and 750 lbs TW
- (1) Convert-A-Ball Interchangeable Ball System with a 1-7/8" and 2" hitch ball (# 901B)
- Ball capacity: 10,000 lbs GTW
- (1) Pin and Clip (# PC3)
- (1) etrailer Ball Mount Bag (# ETBMB)
- (1) Ball mount with 2-3/4" rise or 4" drop (# 2753)
2953w/PC3 + 901B etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Video of etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for etrailer Ball Mount Kit Review EBMK4
Today we're going to be taking a look at the E-Trailer Ball Mount Kit. This is part number EBMK4. Now the parts that make up our kit will start with the ball mount itself. This is from Draw-Tite, part number is 2753. Again, for the two inch by two inch receiver tube opening. You've got a four inch drop where you can rotate it over into a two and 3/4 inch inaudible 00:00:23 to help you cover different bases.
This is a hollow shank so we're not so worried about it being really heavy. Then a 3/4 inch wide ball mount platform, and the whole for the ball shank itself, that's going to be one inch. Now, the ball is part number 901B. This is from Convertible. It's a really nice system that allows you without having to remove this nut, and get everything torqued back down properly, to switch between an inch and 7/8 and a two inch ball. Of course, it's got a one inch bolt diameter that comes down through the shank.
Nut, we're going to have a lock washer, and there's also a cotter pin, just for an additional level of safety. This is the inch and 7/8 ball that we've got installed. We'll just push on the pin that goes through it there. Pull that through. It's going to allow us to remove the inch and 7/8 inch ball and then place on the two inch ball. It's really easy flip of that pin. Now, as far as customer reviews go, one of the concerns I had about this ball mount was ease of use.
Is it eventually going to corrode It's single piece machine steel which is nice. It's going to be heavy duty but also it's nickel coated. We're not going to really have to worry about corrosion. Looking through the customer reviews, people are talking about years of good service out of it, without the corrosion issues that some of the changeable style balls are kind of known for. At each end, there's a small rubber O ring there. That helps to seal that up and it prevents that moisture and dirt from getting in there eventually leading to corrosion.
Something I really liked about the balls themselves is that you can't really remove the pin. You're not going to be able to pull it out so the pin is going to stay with the ball itself. You're not going to worry about losing one of these and having to rely on one coming out of the other ball and switching them back and forth. The pins are going to stay in there. With the bag, this is part number ETBMB and it's going to allow us to keep all of our components stored in there. Part number PC3 here, it's a 5/8 diameter pin and clip. That's what we secure it to our hitch with. Keep everything in one convenient location. We can store this out of the way and we'll have it every time we need it. Now the ball itself is rated for 10,000 pounds whether you're using the inch and 7/8 or two inch variety. The ball mount itself is rated for 750 pounds of tongue weight. That's the maximum downward force we can put down on top of the ball. It's 7,500 pound gross trailer weight ready. That's going to be the total weight of your trailer and anything that you load up. You'll want to go off the 7,500 pounds as a maximum, unless your car is rated lower. Check the owner's manual. See what your car's tow rating is, and follow which ever of those numbers would be the lowest. The ball mount will be ideal for lots of different applications. Your medium and light duty trucks, SUVs, vans, cars. The only real requirement you're going to have is a two inch by two inch receiver tube opening on your hitch. To get it in the vehicle, we're going to take the ball mount out, slide that into the receiver tube opening. We'll line up this pin hole with the pinhole in our hitch. Slide through our provided pin. Secure it with the clip. Now we'll be ready to grab whichever ball we need at the time. The two inch and the inch and 7/8 are going to be very, very common sizes. These are the two you're going to run across a lot. Unless you get into the larger trailers where the two and 5/16 inch might come in more handy. If we've got our inch and 7/8 trailer, just pull our pin, line it up with the hole, and then be able to put that right back on. Now, I recommend the detent side. You'll see it on the pin here, there's going to be a small dimple in there. That's the side you always push from. I recommend when you install it on your ball mount, to have that facing outward. That way it's very easy to access and very easy to push when it would come time for you to switch over to your other ball. The materials that get of course our ball mount. We've got heavy duty steel. It'd be a black, powder coat finish but the important part is the ball and where it goes inside the coupler. They kind of wear on them side to side and that nickel coating is really going to help prevent the rust and stuff like that that we typically get between our coupler and our ball. Then, if any of the rust or grease does get on the ball mount itself, once we have it in the bag, we don't have to worry about getting it all over the carpet inside of our vehicle. Let's hook up our trailer and we'll be able to hit the road. That'll complete our look at the E-Trailer inch and 7/8 and two inch ball mount kit, part number EBMK4.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- etrailer mistake
- Did not arrive in time
Customer Reviews
etrailer 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs - EBMK4
Average Customer Rating: 4.8 out of 5 stars (1318 Customer Reviews)
by: Allan W.03/22/2015
I purchased the etrailer.com 2-3/4 " Rise or 4" Drop Ball Mount Kit, Curt Trailer Hitch Receiver and Twist-in 7-Pole RV-Style Trailer Connector for my 2011 Chevy Silverado. Quick Delivery! All the necessary parts arrived in perfect condition. Directions were spot on and the instructional videos were great.
by: Deb 05/14/2024
It did the trick, although it is starting to rust.
by: Vic 07/18/2023
The drop ball mount is the perfect size for my Jeep. The versatile hitch balls are convenient. Thank you for putting together a great kit, providing excellent communication, and delivering it quickly.
by: Rick 06/24/2023
This item gave me the extra clearance that I needed when using my cargo carrier. Etrailer has everything that I needed for new trailer hitch.
by: Kirby 02/09/2024
Works as intended. 1 year later, still hauling strong. simple and easy to install.
by: Kalee04/11/2024
Dan was awesome to work with! Extremely knowledgeable and helpful!
by: Darren Benari08/09/2017
WOW! What can I say? Easiest install ever! I called ahead of time and spoke with Katie about what I needed. She confirmed what I wanted would work with my van.
I'm in the shipping business. The bar arrived in mint condition in a double wall box with the accessories boxed separately. After removing the hardware, reading the instructions and watching their video online, I went to work. The whole thing took less than 20 mins and I did not have to remove the exhaust. I actually used it to help hold the bar up. It took longer to remove the mud guard and rear body molding than to install.
It is heavy, weighing in at about 65lbs but I did not even have to use a jack on the van. I'm very happy with my purchase and can now put bikes on the back of the van rather than in the van. I can tow our Cub Scout trailer and hall my sons football teams gear with the optional rear carrying racks.
I also love the fact that the bar hides about 6" behind the bumper preventing injuries to the shins. The price was cheap and the install a breeze.
by: deb6283709/26/2011
I bought this product to make my new hitch versatile. Even though presently I am only towing 600 pounds of small sailboat and trailer, I wanted the capacity to tow heavier stuff should the need arise. Therefore, I bought a hitch rated at 3500 pounds, and this ball mount to fit both standard sizes of ball.
The two balls are easy to swap, as advertised, requiring just a screwdriver to push out the pin holding the ball to the shank.
Important tip: The nut holding the ball shank to the mount is enormous, something like 36MM, and I traveled from store to store trying to find a truck-lug socket to fit it, UNTIL I thought to mention that I was installing a trailer hitch ball. Duh. The clerk directed me to the TRAILER HITCH BALL WRENCH, a two-ended box wrench about 18" long. Problem solved for $12. Maybe the instructions could have mentioned this tool?
by: Jesse R.04/10/2011
All in one kit is Very convenient.
but before you order, ensure the rise/drop of this ball mount is correct for your hitch/trailer.
Also - there is a gusset plate welded on the back of the ballmount (Drawtite 2953) in this kit, - on the 2010 Dodge Caravan with the Draw Tite Class III hitch,this plate just rubs/touches the bumper, so this draw bar can't be used on 2006-on Caravan.
by: Chuck04/06/2015
I've never towed anything or had a car with a hitch so i was going in blind. Did a little research and this looked like a good plan. After purchasing, and installing I have to say that this company it excellent to deal with. Online store was set up great with essentially putting together what I needed automatically for a complete solution. I purchased it and it arrived with very good tracking i might add. So I took the laptop out and set in in the back of the Cr-v and hit play on the install video. Stop go, stop go and an hour later the hitch was installed. Took a nice break because my arms were tired...no floor jack as recommended. Next I set off to install the wiring harness and same experience. The video was dead on. It's not a difficult job at all but does require some patience and ability to swear now and then. etrailer.com was a great choice! It's amazing to open a wiring harness box and have a set of printed instructions for your car included inside, the same with the hitch. Just top notch customer service all the way. Thanks for a great transaction.
by: Tommy G02/15/2015
Easy install started by measuring under the car on the pan and marked and cut with razor knife and then removed both rubber bushings that hold the Exhaust pipe ,first I sprayed them to lubed them or else you won't get off to easy then I cleaned the holes and sprayed them. I put the hitch on to a floor Jack and pushed into place under the car and jack it up tight to the holes put a bolt on each side and then the others ,torqued to 50 foot pounds which is the hardest part of the job . then put the Exhaust brackets back on. removed the jack and started on wiring removed panels and unplugged the blue plug and installed a new plug in both sockets and tested it .turn right and left signal on and check ground to green and yellow for pulse and the brown for 12 volts while head light was on . Finished, tried to upload Video but was not able .
by: Dale Cohen09/11/2016
We received our Honda CRV kit very quickly, took about a week to get it into the mechanic for installation. He said it went in very quickly and easily, used it for the first time yesterday and it was exceptional! Very easy to take the hitch in and out, comes with a carrying kit for the extras to store away, light kit is simple to use and hook up. My wife easily put the hitch and ball on herself! Would definitely recommend the company and product to anyone looking to add one to their SUV!
by: TeRoy H03/24/2011
Nice little bag to store the extra ball and the ball mount when it is not in use. This is an excellent product, pulled my trailer within minutes of installation without a problem. Great feature with the removable ball, includes the 1 7/8" and 2" ball, this is awesome. The 2 3/4" rise fits my Caravan and trailer like they were custom made for each other. The trailer rides almost PERFECTLY level with the trailer. Put an actual level on the trailer after hooking it up and it is only a hair off the level, and of course this is probably due to road conditions. Great product at a fabulous price! I have informed all of my friends and family where to go for all their trailer needs.
Thanks ETRAILER.COM! ! !
Thanks ETRAILER.COM! ! !" />
by: Tony F.02/03/2012
the receiver was nice, very easy to install. The hitch pin is a bit simple. The trailer ball kit is a change a ball design, and one of the balls was missing the pin for it. I really don't need the smaller ball and I may change the hitch also to one with a different drop/rise. I will probalbly return this and buy something else, but because I did not get the right one.
by: Richard Burnham Jr.05/01/2011
I like this product it is very reliable and I can proudly say I got it at etrailer.com if I was a company owner I would sponsor this product I would gladly put my name on this product truly a good piece of equipment and it is easy to install and it is nice not to have to unscrew a ball hitch when ever I need a new size ball. Just a all around wonderful product and company. Thanks etrailer.com and all of your employees.
by: Brian C.09/20/2011
Very heavy duty. I used it once so far pulling a utility trailer. Works as advertised. The dual rise/drop option may come in handy as well as having the interchangeability of 2 ball sizes. Easy to use. Make sure you tighten the ball mount to proper torque and use the cotter pin(read your instructions).
by: Kelson B08/29/2017
The hitch, wiring kit, and equipment all arrived in a timely manner. The instructions were very easy to follow, and I was able to get it bolted on with the help of my friend in less than an hour. Wiring instructions were clear and worked just fine. Haven't towed anything to test the ground, but I'm confident it will work great.
by: Michael D.02/25/2011
Product was shipped promptly and arrived in GREAT shape with all parts, hardware and instructions. The installation videos on the etrailer site are excellent. I had 35 minutes before dinner and was able to complete the wiring harness installation in those 35 minutes because of the video instructions ... worth a thousand words. Hitch installation went trhe same way ..... I have not yet towed my new boat (pick up in a 4 weeks) but I can tell you this is a very solid product and installation * * * * * (5 stars) Great customer support as well. oh and by the way probably saved over $400 by doing it myself versus dealer quote!
by: powersupplyguy02/23/2013
The Ball Mount Kit makes it easy to change from 1 7/8 to 2" ball without tools. Great design and carrying bag is very convenient touch. As with any ball mount a large wrench is needed. Also making sure the ball mount pin doesn't turn when installing is somewhat difficult. But once installed this is an outstanding product.
by: Jamie07/08/2013
Great product and easy installation. I would highly recommend and will return as a customer soon.
Jamie
7/8/2014
The product is working great and the quality of the product is superior. This product looks expensive on the vehicle and very solid. It is a great product and you cant beat the cost for this high quality hitch. I have recommended this product to several people and they love it as well.
by: Upstate Nick06/08/2023
100% satisfied.
by: Rick 12/12/2021
I haven’t used the trailer ball and hitch kit yet but the kit is made solidly.
by: Gerald H.01/29/2013
Received the product earlier than I expected. Installed the hitch and wiring harness within a couple of hours without any assistance except for a floor jack. Was ready to tow in no time. Product was exactly as advertised and on-line videos were great.
by: Guy C. 08/01/2015
Nice package at a fair price. The only thing I would like to see in this kit would be a receiver lock instead of the pin. If you plan to tow multiple trailers with different ball sizes this is a must, so you don't have to have different receivers.
by: Eric M.10/21/2014
Service was excellent as the product arrived quickly with no damage and all parts securely sealed and wrapped. Installation was quick and the online videos were extremely helpful. I will recommend etrailer.com to everyone I come accross for their towing needs.
25
1316
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch Ball Mount
- Recommended Receiver Hitch, Wiring and Brake Controller for 2022 Chevrolet TraverseFor your 2022 Chevrolet Traverse, I recommend the etrailer Trailer Hitch Receiver, # e56YR. This is a matte black finished Class III hitch with a spec rating of 5,000 lbs. for max GTW and 750 lbs. tongue weight, but always refer to your vehicle specific owners manual for the vehicles max specs for towing. It is a custom fit bolt-on model that comes with all needed hardware and lifetime technical support from the experts at etrailer. Made in USA. You will need a ball mount, such as...
view full answer... - Trailer Hitch and 7-Way Wiring Kit for 2008 Ford F-150 Crew CabThe hitch I suggest for your 2008 Ford F-150 Crew Cab without factory hitch is the Hidden Hitch # 41933. The hitch installs without drilling using included hardware. I suggest the etrailer Ball Mount Kit # EBMK4 since it provides you with flexibility for towing thanks to its two ball mounts and two sizes of hitch ball. It even includes a pin and clip and a handy carry bag. To convert your 4-pole wiring harness to a 7-way type that also carries 12V power and braking signals for a trailer,...
view full answer... - Will a Trailer Hitch from a 2008 Honda CR-V Fit a 2013 Honda CR-VThe Draw-Tite trailer hitch # 75547 does not fit a 2013 Honda CR-V. It only fits 2007 to 2011 CR-Vs. The equivalent hitch for a 2013 is # 75742. I have included a link to a video showing a typical installation and a link to the installation instructions for you. If you plan on doing some towing I recommend the etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, a hitch pin with clip, and a storage bag. For trailer wiring use # 118561. I have linked a...
view full answer... - Towing Setup for 2018 Honda CR-V 2WD to Tow 6 x 12 Enclosed TrailerTowing an enclosed rental trailer with your CR-V will require a hitch, ball mount, hitch ball and a wiring harness to power the trailer's lights. Towing mirrors are also a good idea. Most enclosed rental trailers will have a surge brake coupler, which is a coupler that automatically engages the trailer's built-in hydraulic brakes when you slow your vehicle. You'll want to confirm this with the rental company. For your 2018 CR-V I recommend the Draw-Tite hitch # 76128 if you do not already...
view full answer... - Best Hitch for Bike Rack & Trailer Towing with 2018 Honda CR-VA 2-inch Class III hitch is the better option for your 2018 Honda CR-V both for using you hitch bike rack and for towing. Class III hitches like Draw-Tite # 76128 typically have higher weight capacities than the smaller Class II hitches like # 36597 and this makes them the better choice both for accessories like bike racks and for towing trailers too. Draw-Tite model # 76128 offers a combination of high capacity and easy installation, which makes it the one I recommend. You can see the...
view full answer...
- Trailer Hitch and Wiring for a 2011 Honda CR-V to Tow a Motorcycle on a TrailerNot at all. Tongue weight is the downward forced applied at the hitch receiver. Tongue weight is typically 10 to 15 percent of the gross trailer weight. So for example if a trailer weight 2,000 pounds total including cargo then the tongue weight would be around 200 to 300 pounds. I have linked a help article to the right that shows how to determine tongue weight. However, even though the trailer hitch is rated for 350 pounds tongue weight, your 2011 Honda CR-V is rated lower, and you need...
view full answer... - No-Drill Trailer Hitch and Wiring for a 1998 Toyota SiennaFor a 2 inch, Class III trailer hitch for your 1998 Toyota Sienna you can use # C13511. There is no drilling required for installation. I have linked the instructions and a video showing installation for you. If you plan on doing some towing I recommend etrailer ball mount kit # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set, hitch pin with clip, and a storage bag. If the ball mount kit does not have the right rise or drop to tow the...
view full answer... - Will Draw-Tite Trailer Hitch # 75038 Fit a 1989 Ford F-150 Regular Cab, Short BedIf your 1989 Ford F-150 has a standard or step bumper AND the frame measures 37-1/4 inches from left to right (outside to outside) then you can use trailer hitch # 75038. If your truck has the deep drop bumper then you will need # 41504 with adapter # 01685. I have linked instructions for each of these hitches for you. If you plan on doing some towing I also recommend etrailer ball mount kit # EBMK4. It comes with a ball mount, interchangeable ball set, hitch pin with clip, and a storage...
view full answer... - Recommended Parts to Tow a Trailer with a 2012 Hyundai Santa FeThanks for reaching out! I recommend installing the etrailer Trailer Hitch Receiver # e75AR on your 2012 Hyundai Santa Fe because it's a Class III trailer hitch with a matte black finish that blends in better and is more durable than the glossy black finish we see on the other hitches. To complete your towing setup I recommend using Tekonsha T-One wiring, part # 118258 if you have the factory tow package or part # 118415 if you don't have the factory tow package, as well as a ball mount...
view full answer... - Proper Set-Up for Towing a Pop-Up Camper with a 2014 Buick Enclave AWDFor your 2014 Buick Enclave, I recommend the etrailer Trailer Hitch Receiver, # e98863. This is a matte black finished Class III hitch with a spec rating of 5,000 lbs. for max GTW or 6,000 when using a WDS. It has a tongue weight rating of 500 lbs. increasing to 600 lbs. when using a WDS. But always refer to your vehicle specific owners manual for the vehicles max specs for towing. It is a custom fit bolt-on model that comes with all needed hardware and lifetime technical support from...
view full answer... - What is the Highest Capacity Hitch Available for a 2007 Subaru Outback WagonThe highest capacity hitch available for a 2007 Subaru Outback is the Draw-Tite # 75560 you were looking at, which is 4000-lbs. From what I was able to locate with my research, the towing capacity of the 2007 Subaru Outback is only 3500-lbs and when it comes to towing you're always going to be limited to the lowest rated component in your towing setup. In this case, it's the vehicle. With that said, the Draw-Tite # 75560 would be perfect for towing a trailer with a GVWR under 3500-lbs...
view full answer... - Parts Needed to Tow a Small Trailer with a 2018 Hyundai TucsonFor your 2018 Hyundai Tucson I recommend using the Curt # C13240 because Curt hitches have a little thicker powder coating on them, so they'll stand up to nicks and scratches better; this helps prolong the life of the hitch and help prevent corrosion. This hitch has a 2 inch receiver that's ideal for towing, and I recommend going with the 2 inch receiver over a 1-1/4". You'll also need a wiring harness, ball mount, hitch ball and hitch pin to give you everything you need to tow a trailer....
view full answer... - Will Trailer Hitch Fit With 20 Inch Spare on 2019 Honda PilotAll of the trailer hitches that are available for your 2019 Honda Pilot will fit with up to an 18" spare but anything larger will need to be moved to a different location like in the rear hatch area or onto the roof if you wanted to get a roof rack and carrier. If you'd still like to install a hitch on your Pilot I recommend the Draw-Tite Max-Frame # 75225 because it looks sleek and has a tab welded on so you can use the Mounting Bracket # 18144 to secure a 4-Way wiring connection like...
view full answer... - Parts Needed For Towing a Utility Trailer With a 2024 GMC TerrainFirst you will need our etrailer Trailer Hitch Receiver # e59ZR for your 2024 GMC Terrain. This receiver has a 2" opening and will accept our Ball Mount Kit # EBMK4. This will allow you to place either a 1-7/8" or 2" hitch ball on the included ball mount. The Powered Tail Light Converter # C59496 will allow you to wire in a 4-way flat connector. This is the most common connector found on most small utility trailers you might tow.
view full answer... - Towing Package Recommendation for a 2010 Jeep Patriot Latitude EditionThe Draw-Tite Trailer Hitch that you referenced is confirmed as a fit for your 2010 Jeep Patriot Latitude Edition. This is a Class III hitch that is rated for up to 3,500 pounds of towing capacity. Please check the towing capacity limitation of your Jeep Patriot, and compare to the weight of your snowmobile trailer loaded and make sure that you do not exceed the lowest rated component within the towing system. Some times the vehicle tow rating is the lowest rated component and can be...
view full answer... - Towing Capacity of a 2000 Ford Windstar and Trailer Hitch and Wiring RecommendationsYour 2000 Ford Windstar has a gross trailer weight rating of 2,000 pounds unless it has the optional trailer tow package AND 3.8 liter motor. If it has both of those features then it is rated for up to 3,500 pounds. Curt trailer hitch # 13085 itself is rated for 4,000 pounds gross trailer weight so it covers all of the 2000 Ford Windstar models. But you are still limited to whatever the vehicle is rated for (see towing section of the owner's manual for more information) since all of the...
view full answer... - What Is The Best Hitch For 2022 Kia TellurideWe have several options for your 2022 Kia Telluride but I highly recommend the etrailer # e45ZR option as the best available and at a great price. - Trailer Hitch Receiver, # e45ZR - 4-Pole Flat Trailer Connector, # CU94FR and Mounting Bracket, # 18144 - etrailer Ball Mount Kit, # EBMK4 This is a rugged and well built Class III hitch constructed in the USA with quality steel. It has a max tongue weight of up 750 lbs. and a gross trailer weight rating of 5,000 lbs. or up to a full...
view full answer... - Will Back-Up-Alarm Sensors be Affected when Installing Hitch # 75338 on a 2009 Jeep Grand CherokeeInstallation of the Draw-Tite Trailer Hitch, # 75338 on the 2009 Jeep Grand Cherokee does not affect the back-up-alarm sensors and will not have a negative impact on the sensors. The only affect you may notice is that when a trailer is connected to the vehicle the backup alarm may sound when the vehicle is shifted into reverse. If your 2009 Jeep Grand Cherokee has the OEM tow hook, most do not, it will need to be removed which will require removal of the rear fascia, plastic bumper support...
view full answer... - Can the Curt Trailer Hitch # 13535 be Used to Tow a Small Trailer with a 2006 Honda CRVThe Curt Trailer Hitch # 13535, will allow you to tow a trailer with gross weight of 3,500 pounds and 350 pounds of tongue weight, see instructions link. The size of the trailer is not as large an issue as the weight of the trailer is. We have an informative article with trailer towing tips for you to review, see link. You will need to consult your vehicle owner manual to be sure that the trailer you plan to tow and all of the contents carried on it are within the vehicle capabilities. Some...
view full answer... - Draw-Tite Recommendation for a 2012 Toyota SiennaYou will need to trim or remove the appearance panel that covers the trunk panel to install this Draw-Tite # 75237 on your 2012 Toyota Sienna, but it will fit on your vehicle. The # 87586 (no longer available) is not completely hidden but it will be largely out of plain view. You will still be able to see the hitch opening but the cross tube and mounting brackets should not be too noticeable. I attached a picture of the area of the appearance panel that will need to be trimmed as well...
view full answer...
- Correct Curt Trailer Wiring Parts for a 2022 Mazda CX-5The Curt Upgraded Circuit Protected Powered Tail Light Converter # C56496 along with the Powered Converter Wiring Kit # 55151 are what you need to add wiring to your 2022 Mazda CX-5. Sometimes our fit system needs adjustments made and this is one of those times. You're good to go with these parts! If you're looking for a complete towing setup then I also recommend checking out the etrailer Hitch # e98902 because of the durable matte black powder coat and then the ball mount kit # EBMK4...
view full answer... - Curt Trailer Hitch Options for a 2016 Jeep Cherokee TrailhawkYes, the Curt Trailer Hitch Receiver # C13171 will fit with the Trailhawk model of the 2016 Jeep Cherokee. For a complete towing setup you'll need the wiring # 118605 and a tow ball kit like part # EBMK4. I've attached some videos for you to check out.
view full answer... - Trailer Hitch and Wiring Recommendations for a 2017 Ram ProMaster 1500 Extended BodyFor the 2017 Ram ProMaster 1500 we are using EXT to refer to the extended body models which sounds like what you have. Draw-Tite trailer hitch # 76050 does indeed fit the extended body models. A lift is not required for installation but jacking up the rear of the vehicle will make it easier to install. I also recommend etrailer.com 2-3/4" Rise or 4" Drop Ball Mount Kit - 7,500 lbs Item # EBMK4. It comes with a ball mount with a 2-3/4 inch rise or 4 inch drop, interchangeable ball set,...
view full answer... - Recommendation For Hitch That Clears The Muffler On A 2010 Jeep CompassHaving the exhaust system contact and rattle against the hitch is a fairly common occurrence that can happen with just about any vehicle. You can install the hitch on two identical vehicles, and it'll rattle on one and not on the other. When the hitch is installed, it's in a static or fixed postion. It will not move. Due to the rubber isolators used to install exhaust systems, the exhaust system can move around a bit and its exact location can vary a bit from vehicle to vehicle. There's...
view full answer...
Do you have a question about this Trailer Hitch Ball Mount?
Info for this part was:
Video by:
Kathleen M
Installed by:
Randy B
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Darren B.
8/10/2018
Love em