Summer Starts Here - Save up to 70%
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Replaces the flip levers and cam nuts for Yakima FatCat and FatCat EVO ski and snowboard carriers. Secures the carrier to the mounting bracket. Includes 4 replacement levers and nuts.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, we're going to be taking a look at some replacement parts for your Yakima FatCat 4, or your FatCat 6 EVO. So, if you're like me and you lose things a lot, or things just tend to break on ya, well, what we're gonna be looking at today is gonna be some replacement parts, specifically, just a little knob right here. So, if it breaks on ya, maybe you tighten it down a little too much, or it just gets brittle over time, these knobs are gonna be essential to getting the FatCat Evo up onto your roof. So it's gonna come with four of these right here. So if you have FatCat, all you have to do is grab one of the replacements and it's gonna come with enough for both the front crossbar and the back crossbar and each of 'em have two on them, but it's also gonna come with the washer as well. So if you did lose the washer and you don't have one at your house, it's gonna come with both.
So you don't really have to worry about anything like that. But again, sometimes these kind of run off or they just break. So we do have replacements for ya. It's gonna be the exact same one that came with the kit originally. So you don't have to worry about it not fitting.
There really isn't a whole lot to go over when it comes to replacement parts, just know that we do have them. And if you maybe break the whole entire foot assembly too, we have this as well. So just go to the related parts section of the webpage of FatCat and you're gonna find all the replacement parts. That's basically it for our look at the replacement washer and knob set for your Yakima FatCat Evo..
Average Customer Rating: 4.9 out of 5 stars (79 Customer Reviews)
Replaces the flip levers and cam nuts for Yakima FatCat and FatCat EVO ski and snowboard carriers. Secures the carrier to the mounting bracket. Includes 4 replacement levers and nuts.
I now have several of these racks (on two vehicles). Switching the original rack between vehicles was easy until a knob broke. The cam nut still functioned but switching between vehicles was a pain. Bought a second rack and now have the extra parts available if/when I need them. etrailer was easy to work with and updated me frequently as to the status of this back-ordered part (Yakima didn't have the part available either).
Took 6-8 weeks to come back in stock... but this is what I needed. Too bad I couldn't get it directly from Yakima
Very responsive in keeping me informed of where the order stood and when it was coming. Very helpful.
good customer service and follow through
Fast shipping and excellent product.
Identical replacement for my Yakima fat cat 6 board carrier.
Solid replacement product. Only reason I did not give them 4 stars is the handles are longer than the factory ones and does not work well with the extension out on the ski mounts. Luckily I only had to replace one knob so I swapped the replacement with a factory and it worked just fine.
The folks at etrailer were super friendly and helpful. Although there was a bit of a few months delay (not eTrailer's fault) they kept me in the loop and kept the communication open throughout the whole process.
Would do business with again in futur. 5 STARS
Thank you
So happy I chose genuine Yakima parts from etrailer.com for for the best price and customer service.
Exactly what I needed and fast ship couldn’t be happier
I went from devastation to elation in five minutes 30 seconds. I broke the above noted screw/locking device for my Yakima ski rack while putting it on my car for the season. I immediately looked up "Yakima ski rack parts" on the computer and a picture of he exact part popped up on my screen in no time. In another two minutes I had completed the ordering process and the part was on its way.
The best part was etrailer didn't jack up the price for the part or charge some insane amount for shipping (and the part got here in no time)!
Better quality than the originals!
I recently ordered these knobs as I lost one of mine used to tighten and secure my Yakima FatCat 4 snowboard rack to my crossbars and it wasn't possible without these. Not only did they fit as hoped but they seem to be heavier duty and of better quality than the original knobs that came with the rack. These are Yakima OEM knobs so they're the real deal but it seems like Yakima improved the quality of them compared to the ones that came with the rack I have.
With all of this said, one can easily find wing nuts that will fit the screw to the Yakima rack but just in case you were wondering if these would work and fit, the answer is yes! And they're the best quality!
Slightly delayed but excellent communications by the customer service representatives.
Very responsive and followed up waiting for the product that was back ordered to arrive.
Great deal and they fit amazing! Thanks you
Just what I needed thanks!
Great product exactly what I needed. Now I'm back using my wisperbar snow mount for winter sports. Needed a replacement as one of the original product screws got stripped when I was removing them last season. These guys are great! Very quick shipping too!
Customer representitives kept me updated on my order. I initially ordered two sets but they had only one set in stock. Customer representitive called me right away and explained in detail about my order.
I requested just the one set thta they had in stock and it was sent out that next day plus my refund was processed that same day for the second set.
I will definitely use etrailer again and I would recommend them to anybody.
Quick response
These worked great and were actually made with better materials than the originals. Perfect replacement and resolved the problem I had with the originals after only one year of use. Thank you for making these available!
Had to wait a while to receive this product, BUT, that being said, the folks at etrailer.com kept me updated along the way and were very responsive.
Cool that I got the delivery a couple days earlier than scheduled. That allowed me to replace the parts on my ski racks before my trip.
Received quickly and order was exactly right. Couldn't find these parts anywhere, found etrailer.com, who now has a new customer.
Received exactly what I ordered in the expected timeframe. Excellent ordering experience and was able to replace my broken part ahead of when I needed to. Thank you etrailer!
Etrailer made it easy to find the "hard to find" part that I needed at a very reasonable price!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
2/19/2022
One year later still happy with my Yakima parts from etrailer.