Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base
(553 reviews)
Price: $3.31
In Stock
Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base
Item # MC32AB
Retail:$14.83
Our Price: $3.31
You Save: 78%
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (553)
- Q & A (0)
- Photos
Optronics Trailer Lights - MC32AB
- Clearance Lights
- Rectangle
- Incandescent Light
- Amber
- 4L x 2W Inch
- Surface Mount
- Rear Clearance
- Side Marker
- Non-Submersible Lights
- Optronics
4" x 2" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Amber acrylic lens with reflex reflector. Surface mount on 3" centers - hardware not included. Twist-in bulb socket. P2 rated.
Features:
- Rectangular trailer light serves as either a side marker light or a clearance light
- Amber acrylic lens with reflex reflector
- Lens is replaceable
- White ABS plastic base
- Incandescent bulb
- Mounts on surface of trailer - hardware not included
- Twist-in bulb socket with power lead and ground wire
- DOT compliant
- P2 rated
Specs:
- Dimensions: 4" long x 2" tall x 1-1/8" deep
- Power draw at 12.8 volts: 0.2 amps
- Mounting hole dimensions:
- Center to center: 3"
- Mounting hole diameter: 1/4"
- 3-Year warranty
Note: A hole must be drilled on the mounting surface for routing the wiring and for the base of the bulb to sit into.
P2-Rated or P3-Rated Lights
A P2-rated or P3-rated light produces a 45-degree angle of light to either side of its centerline for a total of 90 degrees of coverage. This beam pattern can be seen straight on, but it cannot be seen clearly from the side. So this type of light can be used as either a side marker light or a clearance light, but it cannot function as both. If you need both functions, then you must install 2 separate lights on your trailer - one as a front or rear clearance light and one as a side marker light.
MC32AB Optronics Rectangular Side Marker/Clearance Trailer Taillight with Reflex Reflector - P2 Rated - Amber Lens - White Base
Alternate part number: MC-32AB
California residents: click here
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
Customer Reviews
Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base - MC32AB
Average Customer Rating: 4.8 out of 5 stars (553 Customer Reviews)
4" x 2" Rectangle. Incandescent trailer light serves as either a side marker light or a clearance light. Amber acrylic lens with reflex reflector. Surface mount on 3" centers - hardware not included. Twist-in bulb socket. P2 rated.by: 01/02/2024
Items arrive broken because they put them loose in the same box with spring hangers!
by: John 02/13/2024
Perfect fit to replace the cover of one on our 2017 Micro Lite. Thank you!
by: Texas Badger12/31/2016
I have bought many products gor our camper from etrailer from hitchesyo lihht bulbs. Always great service at reasonable prices, usually 30 to 50% lower than local RV dealers.
Texas B.
1/2/2018
The lights are great.The only problem Ive had is there is no built-in backup warning to keep me from backing the trailer into things and breaking the lens. LOL
by: Gregory03/27/2013
These lights are really good for the price! (I ordered 16)
They aren't cheap feeling or flimsy.
They feel sturdy, durable and they look quality.
The wires are the correct gauge and the light bulb is in a rubber grommet for weather sealing.
The light is sealed very well and it takes some effort to remove the lens cover.
The lens is thick and the color is true. The reflector is bright.
I was genuinely impressed with lights especially for the cost.
These will be replacing older side marker and clearance lights on my older 1985 Sunstream motor home.
My lights are faded, some broken, mostly leaking and more costly to replace than what they are worth.
These MC32RB and the Amber version lights will look great!
Slightly different style, same size and better looking and better quality than the originals.
Very happy with lights and etrailer.
Will be ordering more items.
Thanks.
G.
by: April 04/29/2024
Perfect fit and we received them quickl y.
by: Phil M07/15/2017
I purchased red and amber lights to replace the faded and broken ones on my travel trailer. Camping World wasn't able to help me. Found you all while searching the internet. Great produce. Great price. Better than the originals. The screws that secure the lights to the trailer are protected from the weather (they are under the removable lens. Easy to install. Ended up replacing all eleven lights.
Phil M.
7/15/2018
Work and look great. Again, installation was easy.
by: Ron 02/07/2024
My new light looks EXACTLY like the ones installed twenty three years ago. Hu
by: Chuck 02/07/2024
Received on time and was the correct part. Will use them again.
by: James10/23/2023
Lights area perfect match for the existing ones on my travel trailer.
by: Jon08/03/2023
1 of the 2 trailer lights was missing the bulb
by: Nancy03/22/2024
Fit perfectly
by: Harvey 09/09/2023
great part fit perfect price was very low will must definetly use e-trailer for all my trailer parts
by: Leroy09/01/2023
Good price and arrived when etrailer said it would. What more can you ask for?
by: Mark B02/14/2024
Awesome service!
by: Angela W.07/11/2013
Tracking let me know when to expect these. They arrived on time, and in good shape. Installed them, and they work great. Bright bulbs, simple install. Great price too! Thanks again!
by: Vincent 07/07/2023
E trailer has always treated me excellent. Itis the first place I check when I need something
by: Jack05/04/2020
I ordered 7 lights for my trailer and was pleased with the lights and the quick delivery.
by: Roy 04/25/2023
The receipt of the trailer reflective light received today (2DAYS) before expected made my 82 year old life a lot easier. Now I can pass inspection before my registration runs out. Thanks to all involved you made an old man very "HAPPY"
by: Steve 11/15/2023
As advertised
by: Ed07/22/2022
Just as expected. Thank you.
Ed G.
7/23/2023
Still looking good.
by: Mike06/07/2023
Glad I found etrailer! great service..
by: Rich S.09/11/2017
I have a trailer that did not meet DOT Regs. I needed to install amber side lights. Your amber light mc32ab was just perfect for what I wanted. Very low price and the light fit on the side of the trailer with no problem. Very good light for the money.
Rich S.
9/12/2018
I have had no problem at all. The light holds up well and still looks new.
by: Mark 08/24/2023
Just got my product today. Ordering and shipping was fast and easy. Price was excellent. Thank you.
by: TECTim03/14/2017
I ordered this part to replace a broken one on my 5th wheel RV. It fit perfectly. Great price and delivered within just a few days. I only wish it was made in America.
Tectim
3/14/2018
Still working. It looks just like the original light It replaced.
25
553
Show More Reviews
See what our Experts say about this Optronics Trailer Lights
- Solution for Replacement Mounting Plate for MC32AB Trailer LightsThe lens # A32AB, bulb # A194B, and gasket # A32GB are the only replacement parts available for the # MC32AB clearance lights. Unfortunately this means the only way to replace that mounting base is to replace the entire light.
view full answer...
- Utility Trailer Light Wiring Diagram and Required PartsI have attached two basic trailer light wiring diagrams of utility trailers for you to check out. The difference between the two diagrams is the type of wiring harness that is being used. Diagram 1 shows a traditional wiring layout with jumper wires to provide running light functions for both sides of the trailer and Diagram 2 shows a wishbone harness. The wishbone harness has two running light wires, one for each side of the trailer. Diagram 2 is the preferred method and it is more common...
view full answer...
- Do Bulbs Come with Optronics Lights ST40RB, MC32RB, MC32ABYes, the bulbs do come with the Optronics Lights # ST40RB, # MC32RB and # MC32AB. They are already installed in the lights assemblies so all you will need to do is wire up the assemblies and you will be good to go. I attached review videos for the # MC32RB and the # MC32AB for you to check out also.
view full answer... - Lights Needed on 12 Foot Long x 83 Inches Wide Dump TrailerI can certainly help you find all of the parts needed to rewire your dump trailer and we do have a lighting kit that will work for you. However we do not have any kind of plug-and-play rewiring kit. The taillight kit I recommend for you is the Optronics Waterproof, Over 80 Inch LED Trailer Light Kit with 25 Foot Wiring Harness # TLL16RK. This kit includes 2 red LED taillights with the functions needed for trailers over 80 inches wide. The included wiring harness has 25 feet of wire to...
view full answer... - Optronics MC32 Series Amber Light with Black BaseYes, I checked with Optronics and you can get the MC32 series amber light with a black base, # MC32ABB.
view full answer... - Replacement for Reflect-O-Lite 400The Reflect-O-Lite line has been discontinued for quite some time so replacements are no longer available. However, the Trailer Clearance or Side Marker Light w/ Reflex Reflector part # MC32AB is a very similar option that will work well in its place. In regards to installation, all you will need to do is mount the base with a screws part # 1131832 and then match up the wires with butt connectors part # DW05744-5.
view full answer... - How to Install Trailer Light part # MC32AB to a Trailer with a Single Power WireSounds like you bought the # MC32AB and the # MC32RB to replace what you have on your trailer. This is the only style of light we offer in that size. It sounds like your trailer may ground it's light assemblies through the mounting hardware. Which in this case would mean that you would only need to run the ground wire of this light to the mounting hardware and the other to the power wire of your trailer's wiring.
view full answer... - Do the Clearance Lights MC32RB and MC32AB have GasketsBoth the # MC32RB and the # MC32AB do not have foam gaskets between the lens and the base. It is unlikely but possible that your current trailer lights had lenses that were once color and have now faded to being totally clear.
view full answer... - How to Use an Amber Turn Signal Parking Light on a Trailer with Combined TaillightsWhat you are going to need to install the Trailer Turn Signal and Parking Light # MC32AB that you referenced is a Vehicle to Vehicle Taillight Converter # 118158. This product will wire in on the trailer wiring and will split your tail light circuitry so that the blinker and brake light circuits will be separate. Here is how it will wire in. You will run the ground wire from your trailer 4-way to white wire of the box, the left turn/stop wire to the yellow wire and the right turn/stop...
view full answer... - How to Install an Amber Turn and Parking Light on a Trailer with Combined Brake and Turn SignalsMany people inquire about wiring a trailer in the way you describe, and it is possible, but you will need to use a vehicle to vehicle taillight converter, part # 118158, to accomplish this. The converter will be wired inline on the trailer wiring and will break out the turn and brake circuits. I attached a drawing that shows how I would go about wiring this converter on a simple 4 wire trailer. You would just need to cap off the red wire on the output side of the converter and tie that...
view full answer...
- Recommended Replacement Lens For Optronics Clearance or Side Marker Light MC32ABI pulled one of the Trailer Clearance or Side Marker Light, part # MC32AB from our warehouse. You can remove the lens by using a very small screwdriver and prying it. I recommend moving the screwdriver along the seam to make sure you do not break the lens on the light. Once you have the lens off you can order a replacement like part # A32AB. You can just snap the replacement lens back in place. The mounting holes are inside the assembly, so if you need to replace the light assembly...
view full answer... - Amber Clearance Trailer Light to Match Optronics # ST31RBWe don't carry an amber light that's the exact as the # ST31RB but one that is quite close is # MC32AB. Another option is to replace the lens with # A30AB which is the amber lens that fits the # ST31RB.
view full answer... - Replacement For A SAE-A-P2-72 Trailer LightWe do offer the Optronics trailer light # MC32RB for red and # MC32AB for amber. These lights will be extremely similar to the # MCL31RB that you mentioned, but they are a bit more square on the ends. The mounting holes on the # MC32RB are 3" apart on center which should be fairly standard. This # MC32AB and # MC32RB appear to be what you are looking for.
view full answer... - Replacement Side Marker Light that has SAE AP2 01 On the LensIf your original light is 4" L x 2" W x 1-1/8" D then Optronics light # MC32AB will fit in its place. If you have different dimensions let me know what they are and I can see if we have anything that is a match.
view full answer... - Replacement Clearance Lights with Reflectors for 1998 Coleman Cheyenne Pop-Up CamperFor your 1998 Coleman Cheyenne the clearance lights with reflectors you need are most likely the Oval Trailer Clearance, Side Marker Light with Reflector - Amber # MC38AB or the rounded rectangular # MC32AB. Both of these options are 4 x 2 inches and look like what you need based on the photos I can see online. I've attached the links to the light bulbs and amber lenses that we carry for you to compare if you simply want to replace the bulb and lens.
view full answer... - Replacement Clearance Lights Options For a 1991 Newmar American Star 25RK 5TH Wheel RV CamperYes, we do have these lights available in both incandescent or LED. The lights will all have a white base and the lights have an overall size of 4" long by 2" wide and 1" deep. Incandescent Amber Lens # MC32AB Incandescent Red Lens # MC32RB LED Amber Lens # MCL32AB LED Red Lens # MCL32RB Amber Replacement Lens # A32AB Red Replacement Lens # A32RB I recommend getting a couple spare lenses in the event one of them becomes damaged while driving.
view full answer... - What Size Hole Needs to be Drilled to Mount Optronics Trailer Clearance Light # MC32ABI went out to the warehouse to take a measurement of the Optronics trailer light # MC32AB. On the back where the wiring is the grommet width is 0.65 inches so that is the size hole you will need. You can use an 11/16 inch drill bit which will provide a slightly larger hole. I also made a video for you sharing this information.
view full answer... - Replacement Lens for SAEAP2 16 DOT Clearance Light The number you provided from the lens, SAEAP2 16 DOT states that the lens is compliant with DOT regulations, but in most cases it won't help us identify the lens. However, we've gotten enough inquiries about this lens that I can identify the replacement as # A32AB which is the replacement lens for the Optronics # MC32AB lamp. You can confirm this by looking at the housing of the existing lamp which should have the part number printed on it somewhere. The lens measures 4" L x 2" W x 1/2" H.
view full answer... - Availability of a Trailer Light with SAE Number SAE AP2 01The SAE number of a trailer light isn't always the best way to pick out a replacement light since that isn't a part number. But most likely you are looking for a # MC32RB which measures 4 inch by 2 inch. If not, check out the link I attached that has all of the trailer lights we offer.
view full answer... - Parts Needed to Replace Entry Door Latch, Roof Vent and Amber Lens on 2018 Rockwood Mini Lite 2509SFor the entry door handle you can use the Global Link RV Entry Door Locking Latch Kit with Keyed Alike Option - Black # 295-000019, which replaces your Global Link, Bauer, Lippert Components, Fastec (FIC), or TriMark standard entry door latch. For the clearance light lens, it looks like you've got a fairly standard 4" x 2" clearance light so you can likely use the Replacement Amber Lens for MC32AB Trailer Lights # A32AB, which snaps into place on the grommet. This lens is a replacement...
view full answer...
- Replacement Amber Lens for SAE APC LightThe only thing I could find that referenced the sae apc 12 description you gave me is the Optronics Trailer Light item # MC32AB. Which has the replacement lens item # A32AB. You will want to confirm by measuring your current lens or check for a product number on the back of the light itself. This lens measures 4" long x 2" wide x 1/2" tall.
view full answer... - Recommended Replacement 4" x 2" Amber Trailer Clearance or Side Marker LightI recommend using the Trailer Clearance or Side Marker Light part # MC32AB for incandescent or part # MCL32AB for LED as a 4"x2" replacement trailer marker/clearance light in amber. These are a very common and standard design used on many trailers so they should work well for you. They install via three holes, one for wires and two for mounting screws.
view full answer... - Parts Needed to Add Lights to 50 Foot, Triple Axle Trailer with No Existing LightsThanks for the photo of your trailer! The taillights I recommend for your trailer are the Optronics Over 80 Inches, Rectangular Submersible Trailer Tail and License Light, Left-Hand # ST17RB and the Right Hand # ST16RB.These lights will provide you with the stop/brake light, tail light, turn signal, rear reflector, license plate lights, rear side marker lights, and rear side reflectors needed for trailers 30 feet or longer. For front side clearance lights and reflectors as well as intermediate...
view full answer...
- Recommended Marker Light For Fenders On 1999 Pace WorksportI don't have the specs for your specific light as manufacturers constantly change lights, but I can make a recommendation for you to replace what was ripped out. I see two different colors online, so I'll give you an option for an amber light and a red light. For an amber light, I recommend the Trailer Clearance or Side Marker Light w/ Reflex Reflector - Rectangle - Amber Lens - White Base, # MC32AB. This light is 4 long x 2 tall x 1-1/8 inches deep. It is a surface mount with a twist-in...
view full answer...
Do you have a question about this Trailer Light?
Info for this part was:
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Brandon M
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Patrick B
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Amy B
Updated by:
Wilson B
Updated by:
Brian T
Updated by:
Noah M
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
1/11/2024
Oh that is not good to hear! Lets get you over to customer service for them to get this corrected for you.