TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2
(102 reviews)
Price: $147.31
In Stock
TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2
Our Price: $147.31
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
19% prefer this
15% prefer this
- All Info
- Reviews (102)
- Q & A (0)
- Photos
TorkLift Accessories and Parts
- Camper Tie-Downs
- Turnbuckles
- Frame-Mounted
- TorkLift
- Standard Disconnect
- Powder Coated Steel
- Locks Not Included
- No Tension Indicators
Basic kit lets you easily secure the front or rear of your truck bed camper to your TorkLift frame-mounted tie-downs. Spring-loaded barrels help minimize stress on tie-down points. Sturdy steel turnbuckles let you firmly tighten down your setup.
Features:
- Turnbuckles secure your camper to the tie-downs (sold separately) mounted on your truck
- 2 Additional turnbuckles (sold separately) are required to secure all 4 corners of your camper
- Spring-loaded design helps to reduce stress on tie-down points
- Forged steel construction
- Kit includes:
- 2 Heavy-duty, hook-to-hook turnbuckles
- (2) 24" Long x 1/4" wide chain
- (2) 2-1/2" Long x 1/2" diameter carriage bolts
- (2) 1/2" Flat washers
- (2) 1/2" Lock nuts
- (2) 5/16" Quick links
- Simple installation
- Bolt each spring-loaded barrel onto a tie-downs
- Attach 1 chain to the eyebolts on the barrel
- Hook one end of a turnbuckle to the chain, hook the other end to the anchor on your camper
- Manually tighten the turnbuckle until the barrel's eyebolt lifts 1/8" off of the barrel
- Made in the USA
Specs:
- Application: TorkLift frame-mounted tie-downs for truck campers
- Turnbuckle adjustable length: 9" - 13"
- Quantity: 2 turnbuckles
- Lifetime warranty
S9000 Tork Lift Spring Load Camper Turn Buckles
Item # TLS9000
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Did not arrive in time
Customer Reviews
TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 - TLS9000
Average Customer Rating: 4.7 out of 5 stars (102 Customer Reviews)
Basic kit lets you easily secure the front or rear of your truck bed camper to your TorkLift frame-mounted tie-downs. Spring-loaded barrels help minimize stress on tie-down points. Sturdy steel turnbuckles let you firmly tighten down your setup.by: Neil03/18/2019
5 Stars to etrailer for their usual stellar customer service. I've always had a positive experience in my years of dealing with them. The attention to detail in your web site is so appreciated. The PDF Instructions you posted was a real help since the manufacturer's printed material that came with the kits was not legible due to over inking in the printing process.
I did subtract one star from the product simply because I was caught off guard when we picked up our new camper. The supplied chain with the kit did not reach the tie down points between the camper and Torklift frame mount bracket for the front pair of mounts. Luckily, I had a short length of chain and 3 additional split links in the truck with me and was able to "jury-rig" a temporary solution. The rear connections worked as advertised. I realize that this is Torklift's issue, not etrailer's, but I've noted it here for the benefit of others.
For the record, the camper mounts were very typical for campers of this size. It was a 2018 Travel Lite 840 SBRX model and our truck is a 2016 Ram 2500HD short bed (6'-5"). Photo IMG_4966 shows this required modification.
by: Aj02/21/2020
I use these to reduce the stress on the camper when it might rock side to side suddenly.
The springs seem very stiff since when I tighten on the turnbuckles it takes a lot to compress them just a tiny amount, and this is good. I would not want the springs to be compressed to easily.
I mounted the springs at the camper up front, and at the truck tiedown point on the rear because is just what I had to do to make it fit.
I put 30,000 miles on these with no issues, and a few trips down off-road locations that bumped the truck all over and the camper held fine.
I cannot really tell you any difference between chains and chains with the spring, but I like the peace of mind knowing there is allowance for the TC to move before breaking something.
by: Tim 11/01/2023
I have installed the tie-downs and all is well. Have not road tested them, yet.
Will send another after a test.
by: Wyatt09/12/2023
This system for securing your slide in camper is really good. Instalation is straight forward. Highly recommend.
by: Hendryk05/11/2022
Based on MI I bought these for an '85 camper sitting on a '95 F-250 last year. Toured the western US for 2 months and then drove to NH and back with zero concerns. Excellent product. Highly recommend...
Hendryk
5/15/2023
A year out and almost 15,000 miles on this hardware. No complaints and everything is working as it should...
by: Clifford 03/20/2024
Put together haven't used yet haven't bought the camper yet
by: Rick11/02/2023
Chains too short, no enough hardware to do the job
by: Roy09/12/2023
Very well built. Easy install if you are mechanically inclined.
Overall a very nice product.
by: Jeff 02/21/2023
Not much to say....they're chains and turnbuckles. Good quality!!
by: Margaret 03/12/2023
Works well, no complaints there. Slightly expensive, also instructions could be better!
by: Joe M.08/29/2019
Seems expensive for what it is, but I think it is worth it for the peace of mind you get when you see them installed. Very sturdy and secures the camper down well. One thing I did notice though is it seems like the bolts should be a little bit longer so there are more threads beyond the end of the nut when installed.
by: David 09/14/2021
I'm still thrilled with the TorkLift SpringLoad Turnbuckles - they've been EASY to use, give me a much better sense of stability than I had with non-spring turnbuckles, and meet the warranty requirements of my camper. I bought 2 sets to have the spring mounts on all four corners of the camper. I have the camper on and off the truck regularly and when remounting the camper it's very simple to adjust the tension to the correct level on the turnbuckles. I'm a big TorkLift fan... these do a great job at an excellent price.
by: Jeff 12/03/2022
Great easy install, only the chain carabiner quick link didn’t fit the chain, so just widened it with a punch.
by: Brian 07/10/2023
Is what it is. I wish you could buy just the spring cartridges.
by: Craig05/06/2021
Good product,I installed them today. Directions were ok, they are heavy so I expect good longevity.
Craig L.
5/9/2022
Works as intended, good product.
by: Steven02/26/2019
etrailer experience was top notch. Easy ordering, prompt shipping and item received without damage. Installation was very easy with great directions including pictures. Have used tie downs for a year and everything remains sturdy and without problems. Highly recommend.
by: Robert 09/30/2022
Best tiedowns
by: Floyd 10/23/2021
Nice product but very expensive, like most other Torklift products. I only needed the spring load portion but had to buy the turnbuckles and chains which I won't be using. Sure wish Torklift had a competitor.
by: Ben08/02/2022
I like the spring load but the turnbuckle lack a little....
by: Bradley07/13/2019
Overall this product works well and easy to install. I do not rate it excellent because as others have stated the chain provided was not long enough. If you have more than 43" between anchor points you will need to extend chain. Also when I called tech support I was put on hold for 10 minutes then prompted to leave a call back number, which I did. I never got a call.
by: Scott04/12/2019
The tie down chains worked as they should. Not as nice as the fast guns, but a lot cheaper.
by: Kelly 06/24/2020
Perfect for our cabover camper! There was mistake on our first order and Etrailer made good on a replacement. 5 star customer service! Will definitely keep ordering from these folks!!
by: Chris C11/17/2019
Simple, heavy duty, easy to install. I used my own tie down points for my camper and these were easy to integrate into my tie down system. Have held up over the last year, my camper is on fulltime and we do some off roading with it. Solid.
by: Kelly 07/17/2020
Nice inexpensive alternative to much more expensive Fastguns. A little more work but worth it.
25
102
Show More Reviews
See what our Experts say about this TorkLift Accessories and Parts
- Camper Tie-Down Fits For 2022 Chevy Silverado 2500 HDWhile we offer camper tie-downs that fit a 2022 Chevy Silverado 2500 HD, I checked with the manufacturer, and the Happijac tie-downs do not fit your truck. So instead what you will need are TorkLift camper tie-downs, and please note there are different fits depending on if you have a 6-3/4' or 8' bed. Also, they do require you have either the factory hitch oor TorkLift SuperHitch Magnum # TL74FR on your truck. Assuming you have that, the correct fits are the following: - Rear (Both bed...
view full answer... - TorkLift Custom Frame Mounted Tie-Downs for a 2002 Chevrolet 3500 HD Silverado Dually 8ft bedThe TorkLift Custom Frame-Mounted Camper Tie-Downs, front, # TLC2204, and rear # TLC3206 are for the 8' bed HD Models of the Chevy/GMC 2500 and all 3500 versions, including regular cab, extended or crew cab configuration with either SRW or DRW. The TorkLift Talon aluminum version, front, # TLC2204A, and rear # TLC3206A, is an aluminum and stainless steel premium version of the same. These part numbers are for the 8" frame of 3500 series labeled trucks and the HD identified 1500 and 2500...
view full answer... - TorkLift Camper Tie-Downs for 2002 Ram 2500 with 8 Foot BedFor your 2002 RAM 2500 long bed, the TorkLift tie-downs you are seeking is the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD4100 and TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLD3101 if you have a board or step underneath. If you do not have a board or step underneath then use # TLD2100 on the front and # TLD3101 on the rear.
view full answer... - Torklift or Other Product for Holding Camper on a Flat Bed F-550I would use the Buyers Products # 337B40MP forged D-rings with brackets in the four locations where they are needed. You could install into metal deck framing, or into typical 2-by lumber materail which itself has been secured to the fram of the truck. Then you could potentially use 4 Cargo Buckle # IMF14069 tie down straps rated for 2200 pounds each. Not only would these hold a camper on the flat bed, but when the camper is out, these parts will help secure other loads. You will need...
view full answer... - TorkLift Basic SpringLoad Turnbuckes Compatibility with 2013 Toyota Tacoma with Factory HitchThe TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000 will work on your 2013 Toyota Tacoma with factory hitch. You will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 and Rear # TLT3303 for the proper fit on your 4 door 4x4 with 6 foot bed and factory hitch if you don't already have the tie downs for your truck. Let me know if you have further questions.
view full answer... - Recommended Camper Tie-Downs for a 2007 Toyota Tundra Long BedI do have camper tie-downs for a 2007 Toyota Tundra with 8' bed but there are none from HappiJac. Instead, you'd have to go with TorkLift, the TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLT2305 for front and part # TLT3304 for rear. The TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs part # TLS9000 (2) can then be used to secure the camper to the tie-downs.
view full answer... - Recommended Camper Tie-Downs For 2011 Dodge Ram 1500 4WD Quad Cab With Ram BoxFor your 2011 Dodge Ram 1500 Longhorn Laramie Quad Cab 6-1/2" bed with the Ram Box and with no under bed running boards or steps or trailer hitch you will need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2121 and Rear # TLD3107. These are a custom fit for your specific truck and will give you the locations needed to secure your truck bed camper. If you do not already have turn buckles I recommend going with two sets of the TorkLift Basic SpringLoad Turnbuckles for...
view full answer... - Are There HappiJac Truck-Mounted Camper Tie-Downs for a 2015 Toyota Tundra CrewMaxI do have an option for camper tie-downs that will fit a 2015 Toyota Tundra CrewMax but there are no options from HappiJac. The TorkLift Custom Frame-Mounted Camper Tie-Downs part # TLT2307 and part # TLT3306 are what I recommend which are a better option as they don't require drilling for installation. The TorkLift Basic SpringLoad Turnbuckles part # TLS9000 (Qty. 2) can be used to complete the setup.
view full answer... - Camper Tie-Down For 2021 Ford F-150 With 6-1/2 Foot Bed & Factory HitchFirst, thank you so much for providing all the necessary info for a fit, it is a big help. And with all that info provided, I checked with TorkLift and was able to confirm a fit for both front and rear aluminum camper tie-downs on your 2021 Ford F-150 with a 6-1/2 foot bed, factory hitch, and no step/running boards, which are the following: - Front: TorkLift Talon Custom Frame-Mounted Camper Tie-Downs - Aluminum # TLF2018A - Rear: TorkLift Talon Custom Frame-Mounted Camper Tie-Downs -...
view full answer... - In-Bed Camper Tie-Down Option for 2008 Ford RangerIf your Ranger has the 6 foot bed, with no running board or step under the truck bed and an factory equipped hitch with a crosstube that's open on the sides or an aftermarket hitch with side plates that measure LARGER than 4 x 4 inches, the Torklift # TLF2013 for the front and # TLR3500 for the rear would be the tie-downs you'd need. For turnbuckles, I'd recommend # TLS9000 which are sold in pairs. You'd need two pairs. The CR Brophy tie-downs are all meant for full-sized, domestic pickups...
view full answer...
- Recommended TorkLift Camper Tie-Downs For 2007 Toyota Tundra 4WD With 8 Foot Bed And Factory HitchFor your 2007 Toyota Tundra 4WD with 8 foot bed and factory hitch, we have the camper tie-downs you need. For the front tie downs, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2305. For the rear, I recommend the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLT3304. These are confirmed to fit your truck. You may also be interested in the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000 or the TorkLift Locking FastGun...
view full answer... - Is Camper Turnbuckle TLS9000 Needed to be Used with TLS9522To use the Torklift Turnbuckles part # TLS9522 that you have you do not also need the # TLS9000. These kits essentially do the same thing and both would not be required.
view full answer...
- TorkLift Tie-Down Compatibility with Factory Hitch on 2019 Chevy 2500 Crew Cab DieselFor your 2019 Chevy 2500 Crew Cab Diesel you will be able to use your factory trailer hitch receiver to tow with the TorkLift Tie Downs installed. If you have the 8 foot bed you will use: -TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2219 -TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3215 If you have the 6-1/2 foot bed you will use: -TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLC2220 -TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLC3215 Then...
view full answer... - Torklift Camper Tie Down Recommendation for 2005 Dodge DakotaThe correct set of Torklift Camper tie downs for your 2005 Dodge Dakota 5 foot bed without steps are the part numbers TLD2114 and # TLR3500. For turnbuckles you'd then want the part # TLS9000 which would work well on your import camper.
view full answer... - Recommended Camper Tie-Downs For A 1984 Chevy C30 Pick Up Truck Since there aren't confirmed fitting TorkLift Camper Tie-Downs for your 1984 Chevy C30 you'll need to use a clamp-on style like the Brophy Clamp On Camper Tie-Downs # HSAB. You'll need to measure the bedrails to ensure that these tie-downs will fit correctly and not come in contact with the exterior side wall of the bed. I've attached the dimensions of these tie-downs for you below to measure you bed with. If you have stake pockets you could also measure to see if the Brophy Stake Pocket...
view full answer...
- Camper Tie-Downs For 2009 Chevy Silverado 2500 Regular Cab With 8 Foot Bed & Factory Trailer HitchIt is a smart idea to verify the right tie-downs because there are so many options, and we do have the correct ones for your 2009 Chevy Silverado 2500 Regular Cab with an 8 foot bed and factory hitch. The only thing that will matter apart from those things is if you have running boards that go all the way underneath your truck bed, or a step underneath your truck bed. That will affect which front tie-down you need, though the rear tie-down will be the same no matter what. The correct...
view full answer... - 2006 Toyota Tundra TorkLift Custom Frame-Mounted Camper Tie-DownsWe have a confirmed fit for your 2006 Toyota Tundra in the TorkLift Custom Frame-Mounted Camper Tie-Downs, # TLT2301 for the front, and # TLT3301 for the rear. Inserts slide into frame-mounted brackets for use and easily remove for a clean, unobtrusive look. Custom designed for your vehicle. No drilling for the front, some drilling will probably be required for the rear. We have the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs, # TLS9000. These come in a quantity of...
view full answer... - Can Brophy Camper Tie Downs Handle a 3,300 Pound Camper in a 2006 Chevy Silverado 2500There is no weight capacity rating on the camper tie downs # HSSF and they will work for any camper size that is properly sized for your vehicle. The associated hardware package # TDHP does have a weight capacity of 3,000 pounds so you wouldn't use it. Instead you could use 2 sets of # TLS9000. Ideally though you would use frame mounted tie downs custom fit for your 2006 Chevy Silverado 2500. If you want to explore that option I have included a link to them for you.
view full answer... - Turnbuckles For Frame-Mounted Tie-Downs on 2002 Ford F-350So the TorkLift AnchorGuard Turnbuckles # TLS9013 won't actually work with frame-mounted tie-downs like you have on your 2002 Ford F-350. For turnbuckles that work with frame-mounted tie-downs, what you will need is one of the following options from TorkLift. - TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs # TLS9000 - TorkLift SpringLoad XL Turnbuckles for Frame-Mounted Camper Tie-Downs # TLS9050A - TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs # TLS9529-2-LK Please...
view full answer... - Recommended TorkLift Camper Tie-Downs for 2011 Ram 3500 DuallyFor your 2011 Ram 3500 Dually, if you have the 6-1/2 foot bed, you will need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2120 and Rear # TLD3109. If you have an 8 foot bed then you will want Front # TLD2115 and Rear # TLD3109. These are custom fits for your vehicle. You will also need the TorkLift Camper Anchor Relocation Kit # TLA7004 for your Dually application. You may also be interested in the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2...
view full answer... - Are the Spring-loaded Barrels Part # TLS9000 Available Without the ChainsWhile the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 part # TLS9000 are awesome to prevent the overloading or twisting we can sometimes get. They are not available as just the barrels. They are sold as a kit to make it easy to add to your current setup.
view full answer... - Camper Tie Down System For A 2016 Ford F-250 Long BedWe can definitely help set you up with a camper tie down system for your 2016 Ford F-250 long bed. The main things you will need are tie-downs and turnbuckles. The TorkLift Camper Tie Downs are the best that we offer. They are very safe and secure, and the arms can be removed when not in use, and the brackets are hardly noticeable. For your truck you will need the # TLF2016 for the front tie downs and the # TLF3006 for the rear. It is important to note that the TorkLift front tie downs...
view full answer... - Are the Torklift Basic Turnbuckles Spring Loaded Yes. The TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000 are spring loaded so they'll work well to allow the camper to shift around slightly while not being too rigid on the frame. These do a great job when used with Torklift tie downs, so if you also need those just let me know what the year, make and model of the truck is and I can help you locate the correct parts for that. I've linked a review video of these turnbuckles for you to check out, as well.
view full answer... - TorkLift Custom Tie-Downs for 2018 Ram 2500The TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLF3001 are the rear tie downs and are not the fit for your truck. They are for a Ford F-150, F-250, or F-350 and only certain model years. For your 2018 Ram 2500, (if you have a crew cab and 8 foot bed for example) would want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2126 and then the TorkLift Custom Frame-Mounted Camper Tie-Downs - Rear # TLD3109 if you determined you did want the rear tie-downs as well. Because...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Written by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Dustin K
Installed by:
Cole B
Installed by:
Andy C
Updated by:
Wilson B
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Neil M.
3/19/2020
The instructions say that the tie down links should be tightened until the loop has pulled away from the housing by 18th of an inch. I cannot get the loop to move at all. I dont want to over tighten the tie down and cause damage but the loop has never moved above the housing. They still seem to hold the camper in place but theres no way I can tell that theres a spring involved in the system.