TorkLift Basic SpringLoad Turnbuckes Compatibility with 2013 Toyota Tacoma with Factory Hitch

Question

Question:

We these work on 2013 Tacoma with factory hitch? 4 door 4x4 with 6’ bed. Thanks

asked by: Jim

0

Expert Reply:

The TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000 will work on your 2013 Toyota Tacoma with factory hitch. You will want the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLT2303 and Rear # TLT3303 for the proper fit on your 4 door 4x4 with 6 foot bed and factory hitch if you don't already have the tie downs for your truck.

Let me know if you have further questions.

expert reply by: Jason S

0

Answer 1

The TorkLift Basic SpringLoad Turnbuckles #TLS9000 actually have an adjustable length of 9 to 13 inches. Just the spring-loaded barrels measure about 4 inches. The two included chains are 24 inches long and 1/4 inch wide. I spoke with my contact at…

view full answer...

Answer 2

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors…

view full answer...

Answer 3

It could be a tow package fuse on the vehicle. Use the owners manual to find the locations of fuses/relays related to the tow package wiring to check them and replace as needed. If the issue is not a fuse or relay then you can test the vehicle side…

view full answer...

Answer 4

Since the issue appears to be on the vehicle side for your 2017 Toyota Tacoma, I recommend first checking the connector itself. Look to see if there is any dirt or corrosion built up inside the connector that may preventing a solid connection with…

view full answer...

Answer 5

I do have an option for you, but we do not carry the Dexter 072-027-00 you mentioned. However we do have the etrailer Double-Eye Spring for 7,000-lb Trailer Axles - 24-7/8" Long #e64SR which will be 3/8" shorter but that is still…

view full answer...

Answer 6

Yes, the #TLD2142 is exactly what you need for your 2019 Ram 3500 with running boards extending under the truck bed. For the rear, you need the #TLD3112 if you have the factory hitch or #TLR3510 if you have the TorkLift SuperHitch Magnum 30K.

view full answer...

Answer 7

According to my contact at Fantastic Vent the correct replacement lift motor to use in your vent is part #FVK6010-81, not item FVK-6050-80. The replacement motor does operate at a higher 17-RPM speed. Since your fan is of a lower rpm and…

view full answer...

Answer 8

Thanks for the photo it was really helpful and based on that, you do have the OEM hitch for your 2003 Chevy Silverado 2500HD. The hitch is unique in that it has the same open-end on the tubes, the same brackets, and same chain loops, which are all…

view full answer...

Answer 9

Unfortunately we do not have a way to replace the keys without knowing the key number for the lock. If they happened to have written down the key number from the lock then we will be able to get you a replacement. The etrailer Trailer Hitch…

view full answer...

TorkLift Basic SpringLoad Turnbuckes Compatibility with 2013 Toyota Tacoma with Factory Hitch

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching