Recommended TorkLift Camper Tie-Downs for 2011 Ram 3500 Dually
Question:
I would also like to check with Jason on the prospect of adding a complete hitch assembly that receives not only the rear tie down anchors but also receives a “heavy duty” hitch extension for towing option behind the camper. I believe the OD to OD @ the truck hitch is 2.5” x 2.5” then reducing down to the normal 2 x 2 receiver after it clears the back of the camper...do you all have those available? This would replace the factory hitch assembly.
asked by: Dennis M
Expert Reply:
For your 2011 Ram 3500 Dually, if you have the 6-1/2 foot bed, you will need the TorkLift Custom Frame-Mounted Camper Tie-Downs - Front # TLD2120 and Rear # TLD3109. If you have an 8 foot bed then you will want Front # TLD2115 and Rear # TLD3109. These are custom fits for your vehicle.
You will also need the TorkLift Camper Anchor Relocation Kit # TLA7004 for your Dually application.
You may also be interested in the TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2 # TLS9000, the TorkLift Locking FastGun Turnbuckles # TLS9529-2-LK, or the TorkLift AnchorGuard Derringer Turnbuckles # TLS9020.
Products Referenced in This Question
TorkLift Camper Anchor Relocation Kit
- Accessories and Parts
- Camper Tie-Downs
- Relocation Kit
- TorkLift
more information >
TorkLift SuperHitch Magnum Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"
- Trailer Hitch
- Custom Fit Hitch
- Class V
- 2500 lbs TW
- 20000 lbs GTW
- 30000 lbs WD GTW
- 2-1/2 Inch Hitch
- 3000 lbs WD TW
- Visible Cross Tube
- TorkLift
more information >
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
- Camper Tie-Downs
- Front Tie-Downs
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
- TorkLift
more information >
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
- Camper Tie-Downs
- Front Tie-Downs
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
- TorkLift
more information >
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
- Camper Tie-Downs
- Rear Tie-Downs
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
- TorkLift
more information >
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 32" Long
- Hitch Adapters
- Hitch Extender
- Trailers
- 32 Inch Extension
- Fits 2 Inch Hitch
- 6500 lbs
- TorkLift
more information >
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 36" Long
- Hitch Adapters
- Hitch Extender
- Trailers
- 36 Inch Extension
- Fits 2 Inch Hitch
- 6500 lbs
- TorkLift
more information >
TorkLift SuperTruss Hitch Extension for SuperHitch Trailer Hitch Receivers - 42" Long
- Hitch Adapters
- Hitch Extender
- Trailers
- 42 Inch Extension
- Fits 2 Inch Hitch
- 6500 lbs
- TorkLift
more information >
TorkLift Camper Tie-Downs - Custom Frame Mount - Rear
- Camper Tie-Downs
- Rear Tie-Downs
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
- TorkLift
more information >
TorkLift Basic SpringLoad Turnbuckles for Camper Tie-Downs - Qty 2
- Accessories and Parts
- Camper Tie-Downs
- Turnbuckles
- Standard Disconnect
- Locks Not Included
- No Tension Indicators
- Frame-Mounted
- Powder Coated Steel
- TorkLift
more information >
TorkLift AnchorGuard Derringer Turnbuckles for Truck Camper Tie-Downs - Stainless Steel - Qty 4
- Accessories and Parts
- Camper Tie-Downs
- Turnbuckles
- Quick Disconnect
- Locks Not Included
- Tension Indicators
- Bed-Mounted
- Bumper-Mounted
- Stainless Powder Coated Steel
- TorkLift
more information >
TorkLift Locking FastGun Turnbuckles for Frame-Mounted Tie-Downs - Stainless Steel - Black - Qty 4
- Accessories and Parts
- Camper Tie-Downs
- Turnbuckles
- Quick Disconnect
- Includes Locks
- Tension Indicators
- Frame-Mounted
- Stainless Powder Coated Steel
- TorkLift
more information >
Product Page this Question was Asked From
TorkLift Camper Tie-Downs - Custom Frame Mount - Front
- Camper Tie-Downs
- Front Tie-Downs
- Frame-Mounted
- Custom Fit
- Powder Coated Steel
- TorkLift
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: How Do You Remove the Gas Tank Cover on a 2015 Ford F-350 to Install the Tie-Downs # TLF2016?
- Q&A: 7-Way Trailer Plug Adapter or Compatibility with Lance Slide-In Truck Bed Camper
- Article: Stability Control for Heavy Duty Vehicles
- Article: How to Mount a Truck Bed Camper
- Article: Components of Firestone Air Suspension Systems
- Q&A: Lance Camper Wiring Harness Recommendation
- Q&A: How do Hitch Adapters and Extenders Reduce Hitch Weight Capacities
- Q&A: Hitch Extension Recommendation for Use With Weight Distribution
- Article: Trailer Maintenance Schedule
- Q&A: Choosing Between Frame Mount and Universal Camper Tie-Downs for Ford F-350
- Q&A: How To Plug 1997 Lance Truck Camper Into 7-way Connector On 2016 Ford F-250
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer
- Article: 4-Step Guide to Installing RV Solar Power
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
Dennis
7/19/2018
I would also like to check with Jason on the prospect of adding a complete hitch assembly that receives not only the rear tie down anchors but also receives a “heavy duty” hitch extension for towing option behind the camper. I believe the OD to OD @ the truck hitch is 2.5” x 2.5” then reducing down to the normal 2 x 2 receiver after it clears the back of the camper...do you all have those available? This would replace the factory hitch assembly.