Replacement 3/8" Clevis Grab Hook with Safety Pin for Titan Chain Transport Chain

Video Transcript for Titan Chain Tie Down Straps TCGH43-10 Review

Speaker 1: Today we're gonna take a look at the replacement 3/8 inch Clevis Grab Hook with safety pin for Titan Chain Transport Chains. This is going to be a direct replacement from Titan to replace that grab hook from your Titan Chain Transport Chains. It includes the Clevis pin and cotter pin to keep that attached to your chain. The way you're gonna get that on and off, you just need some pliers to squeeze the ends of the cotter pin so that it'll pull through the hole on the other side, and once you pull that out the Clevis pin will also be able to be removed. Whenever you are ready to attach that you can just bend the ends of that cotter pin back, at least enough to keep it in place, or you can even fold them over to make it a little bit more secure.Now this is made from grade 43 heat treated steel so it's gonna be very durable. The overall dimensions for this hook, it's gonna be about 4 1/2 inches long from the end of the hook to the attachment point.

It's going to be about 2 1/2 inches wide at the widest point of the hook there where it bells out, and then it's going to be an inch thick at that rounded end for the hole that attaches that Clevis hook, or the Clevis pin. The dimension or the diameter of the Clevis pin is gonna be 3/8 of an inch, and the opening for the hook is just about 1/2 an inch. This does have a safe working load limit of 5,400 pounds. That's gonna do it for our look at the replacement 3/8 Clevis Grab Hook with safety pin.