Completely secure your load with this set of 4 ratchet chain binders featuring a removable handle. When you're done, remove the handle to help deter theft, and get a low-profile unit that's easy to work around. 15,000-lb Load limit.
Features:
Specs:
Note: Do not use for overhead lifting. These load binders are designed to work as part of a complete tie-down system. The overall capacity depends on the safe working load limit (WLL) of the chain(s) that you choose, as well as the capacity of the load binders themselves. The item being tied down must not exceed the combined WLL of the lowest-rated components in the system.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody, Andy here with etrailer.com. Today, we're gonna take a look at this Durabilt Ratchet Chain Binder set with removable handle. Now this ratchet chain binder set features a removable handle that you can use to secure heavy equipment on your trailer. This is perfect for agricultural and industrial tie down applications. So when you're done you just simply remove this handle to prevent tampering and theft. And you've got a low profile set of chain binders that are gonna be very easy to work around.
Some additional benefits of having a removable handle include a reduced chance of getting the barrel caught on chains or cargo, being easier to clean snow, mud and ice from the ratcheting gear and also easier to store, because you're not gonna have, continuously, a handle sticking out of the middle of the binder or the barrel here. So it's gonna be very easy to store. You just remove the handle and you can lay that right alongside whether you put this in a vehicle or in a toolbox of some kind. So that's another great benefit of having a removable handle. Now the ratcheting mechanism tightens down and maintains tension on your chains.
And as you can see, this handle will just go onto the gear and just use this lever on the back to close that and then it'll easily tighten or loosen this, these chain binders. So this is easy to use and safer alternative to lever binders and it gradually tensions and releases chains. And this adjustable pawl has two positions for quick take up or extension. The take up position tensions chains to secure cargo and the extension position allows you to safely release tension and remove the binder. The zinc plated forged steel grab hooks securely attach to chains and then the forged powder coated metal construction resist corrosion and the red color's highly visible.
However, I do wanna mention that you can, you might be able to even see the flakes on my table. That powder coat will come off very easily. Even after just using this a few times that powder coat just flakes right off. So I just wanted you to be aware of that. Probably would be a great ideas to store this, not in the elements, not outside, just to prevent rusting there.
Maybe in your vehicle or in a, like I said, in a toolbox, but just so you're aware that that powder coat does flake off quite easily. This does meet or exceed F M C S A 4 0- C H P- C V S A- W S T D A and DOT standards. And this is for chains with 3/8 inch to 1/2 thick links. And the safe working load of each binder is 15,000 pounds. The closed length, which I have all of these closed, the closed length from center of hook to center of hook is going to be 26 and a 1/2 inches. And then the open length, when these are fully extracted, is gonna be 34 and a 1/2 inches from center of hook to center of hook. So that's gonna give you a take up of eight inches. The handle length, let me pull out my tape measure here while we're looking down on these. The handle length from end to end, we are sitting right at 17 and a 1/4 inches and then the barrel length, which I'm gonna measure from here to here, of each binder is gonna be right at 10 inches. And then the screw diameter is an inch. It is important to note that you do not use these for overhead lifting. These load binders are designed to work as part of a complete tie down system. The overall capacity depends on the safe working load limit of the chains that you choose as well as the capacity of the load binders themselves. The item being tied down must not exceed the combined working load limit of the lowest rated components in the system. Now again, this is for a set of four binders along with the handle, but if you don't need all four and maybe you only need one binder with the handle we do have that available on our website. You can use item number DU- 37- GR and that will take you to the kit that comes with one handle and one chain binder. Well that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me..
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.