Dimensions of T-Bolts in the Thule XADAPT12 Kit

Question

Question:

what are the dimensions of these track bolts? Specifically, I need the threaded section length, as well as the size of the square head please. thanks

asked by: Hermin L

1

Helpful Expert Reply:

The threaded section of the Thule Xadapt12 Watersports Adapter # THXADAPT12 measures 7/8" while the square head is 3/4" x 3/4" as you can see in the attached photo.

expert reply by: Jon G

1

click to enlarge

Answer 1

The part number you referred to are load stops, the Load Stops for Rhino-Rack Vortex Aero Crossbars #RRRLH2. And yes, these are compatible with the Thule WingBar Evo crossbars such as part #TH711420. I have added a link to a video review of the load…

view full answer...

Answer 2

The best option for load stops for your Thule WingBar Evo crossbars are from Yakima: - Load Stops for Yakima HD Bar, JetStream, FlushBar, and RailBar Crossbars #Y01161 The Yakima and Thule have the same size tracks, and the #Y01161 load stops are…

view full answer...

Answer 3

I have a solution for you. Unfortunately, I confirmed with Yakima that the Replacement Installation Hardware for Yakima SideBar Rails #Y45XR does not come with the four spacer plates. The kit only comes with the 8 M6 screws, 8 M6 lock washers, 8 M6…

view full answer...

Answer 4

According to Yakima, the RocketBox Pro 14 Rooftop Cargo Box, part #Y07192 is a fit for the factory crossbars on your Nissan Murano. This cargo box measures 74 x 33 x 16 inches and has 14 cu ft of cargo space. This box features dual-side opening which…

view full answer...

Answer 5

According to my Yakima Representative, the RocketBox Pro 14 #Y07192 is indeed a fit for the factory crossbars on your Outback Sport. Yakima To determine if you will have hatch clearance, you will need to take a quick measurement. If your front…

view full answer...

Answer 6

Thanks for the awesome detail in your question! I pulled each part from our warehouse to provide you the measurements requested. The Thule Xadapt12 kit #THXADAPT12 T-bolt head size is 3/4 inches, 7/8 inch long threaded portion and .23 inch diameter.…

view full answer...

Answer 7

Yes, the bolt kit #880615 is the hardware that secures SL adapter to the Timberline towers so this would be what you are looking for.

view full answer...

Answer 8

Yes it will; your Yakima SkinnyWarrior Roof Rack Cargo Basket #Y07014-16 is 100 percent compatible with the WarriorWheels Cart Kit for Yakima EXO GearWarrior #Y97VR. You have the longer version of the SkinnyWarrior but otherwise it and the…

view full answer...

Answer 9

The Yakima SideBar Rails cannot be cut as the assembly does in fact involve one bar sliding into the other like you mentioned and it would not be structurally sound, but there is a short bed version of these rails, which is the SideBar Rails for…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...