Replacement Clamp-On Bracket for Stromberg Carlson Bike Bunk Bike Rack Carrier for A-Frame Trailers

Video Transcript for Review of Stromberg Carlson RV and Camper Bike Rack Parts - Frame Bracket - 7605-117

Today, we're going to take a look at the replacement clamp-on bracket for Stromberg Carlson Bike Bunk Bike Rack Carrier for A-frame Trailers. Now this is going to be the portion that actually clamps on to your trailer, goes on the inside or outside depending on how you have it configured, and it just applies that clamping force to your frame.The part number for the Stromberg Carlson Bike Bunk Bike Rack Carrier is CC-275. Now this does require the 5/16 x 4 inch bolts, which are not included for the installation. So you will either have to reuse your old hardware or pick up some new hardware to go with this. It is just a single clamp, so if you need two or all four, you will have to pick up multiple part numbers of this.It's made of that durable steel construction with a nice black powder coat finish going over all of the surfaces. It is a direct replacement from Stromberg Carlson, but as far as dimensions, it's eight inches long, by outside edge to outside edge about 1-1/2 inches wide.

Inner width is about 1-1/4 and the bracket is about 5/8 of an inch thick. We'll have our different holes there for adjustment and getting everything mounted up properly.And that's going to do it for our look at the replacement clamp-on bracket for Stromberg Carlson Bike Bunk Bike Rack..