Angled Down Mounting Brackets for Rhino-Rack Sunseeker Awning - RSP, RS 2500, and SG Roof Racks

See what our Experts say about this Rhino Rack Accessories and Parts

• Picking Between the Up and Down Sunseeker Awning Mount
  When picking between the up # RR32123 or down mount # RR32127 for a Sunseeker awning like the part # RR32132 it comes down to a few factors. The up will put the awning up higher and wouldn't hit the vehicle roof so if had a flush bar roof rack where the bar didn't go through the foot of the roof rack and the vehicle sat lower this would be a great option to clear the vehicle and also have additional height. If instead the roof rack had a through-bar type rack, sat pretty high, and also...
  view full answer...
• Sunseeker Awning Mountings Compatible with Thule AeroBlade Edge Roof Rack
  The Rhino-Rack Sunseeker Awning - Roof Rack Mount - Bolt On - 55 Sq Ft # RR32133 and Rhino-Rack Sunseeker Awning - Roof Rack Mount - Bolt On - 49 Sq Ft # RR32132 can be installed on the Thule Aeroblade Edge crossbars using the Mounting Brackets for Rhino-Rack Sunseeker Awning angled down # RR32127 or the angled up bracket # RR32123.
  view full answer...
• Yakima Slimshady Awning Fit with Rhino-Rack Lower Profile Mounts
  The Mounting Kit for Rhino-Rack Foxwing Awnings - Square and Round Crossbars # RR31105 is simply the square or round bar u-bolt kit. The taller portion of the mount is actually a discontinued part and does not come in this kit. It sounds like you are looking for something like the Angled Down Mounting Brackets for Rhino-Rack Sunseeker Awning # RR32127 which haven't been tested with the Slimshady awning # Y36VR so I can't confirm the fit.
  view full answer...
• 2017 Subaru Outback with Factory Integrated Crossbars Compatibility With Awning
  The integrated crossbars of your 2017 have a maximum spread of 39 inches center on center when used in the rear position. They also have no top slot for directly mounting an awning like # RR32133 to the rails so you can't simply use an adapter like # RR32123 or # RR32127 for compatibility. Instead you will need the Rhino-Rack Pioneer Platform - Universal Mount - 58" Long x 47" Wide # RR42115BF to attach to your crossbars and then attach the awning to that platform. This combination is...
  view full answer...
  
• Can I Use the Rhino Rack Batwing on a Tear Drop Trailer with a Rear Hatch That Opens 12" Above Roof
  I have a solution for you to add an awning that will work on your trailer with the Yakima roof rack, but because of the placement of that rear door and how high it raises above the roof, the Rhino-Rack Batwing Awning - Roof Rack Mount - Bolt On - Passenger's Side - 118 Sq Ft # RR33200 isn't likely going to work for you. I think you would find that the Batwing and rear hatch on the camper would hit each other when used together. Instead, you can use something like the Rhino-Rack Dome 1300...
  view full answer...
  
• How To Mount the Rhino-Rack Sunseeker Awning On a Roof with Cargo Basket
  The Rhino-Rack Sunseeker Awning part # RR32133 can be attached one of two ways. The first way would be to attach inside the channels on a Rhino-Rack Pioneer Platform Rack. The second way would be to attach inside the channels on a set of crossbars with top channels. If you have flush crossbars with top channels, then you could use part # RR32123 or part # RR32127 but those are your only options. The Rhino-Rack Sunseeker Awning will not mount direct to a cargo basket but so long as your...
  view full answer...
• Mounting Brackets for Rhino-Rack Sunseeker Awning on 2021 Subaru Forester With Vortex StealthBars
  According to Rhino-Rack, the Angled Up Mounting Brackets # RR32123 will fit the # JA7973 but the Angled Down Mounting Brackets # RR32127 will not work. They are not compatible due to the design and the way the crossbars would mount on your 2021 Subaru Forester. The angled up brackets will allow you to mount the # RR32132 or # RR32133 on your vehicle with the Vortex StealthBar roof rack.
  view full answer...
• Are Sidewalls Available for the Yakima SlimShady Awning
  I do have a solution for you but unfortunately the Yakima SlimShady Awning # Y36VR does not have any side panels that you can add. We do have the Rhino-Rack Sunseeker Awning # RR32132 though which is a little bit larger and is comparable to the SlimShady. Rhino-Rack offers the side panel # RR32112 which you can add one to either side and the front panel # RR32111. You can use these to extend the footprint of the awning or as a windbreaker/privacy section. I have attached a review video...
  view full answer...
• Adapter to Mount Awning on Thule Crossbars on 2022 Subaru Outback Wilderness
  There are a few different possibilities depending on what crossbars you have and what specific awning you would like to mount. If I had to guess you probably have Thule WingBar Evo Crossbars # TH711320 on your Outback Wilderness. If you wanted to use the RhinoRack Batwing Awning # RR33100 or # RR33200 no additional parts would be necessary. If you want a simple awning from Rhino-Rack like the Sunseeker # RR32133 or # RR32132 then you would need mounting brackets. Both the angled up #...
  view full answer...
• Rhino Rack Sunseeker Awning on 2019 Subaru Outback
  The Rhino Rack Sunseeker Awning is designed to mount directly in the T-slot channels of most aftermarket crossbars like the Thule AeroBar # TH7601B-TH7601B or Rhino Rack Vortex Aero # RRVA137B-2 . It will also mount on the Rhino Rack Pioneer Platforms like # RR42115BF . If you already have crossbars with the T-slots, no mounting kit is required. If you have the Rhino Rack RSP, RS 2500, or SG crossbars you can use either # RR32127 (angled down) or # RR32123 (angled up) mounting kits. If...
  view full answer...

Do you have a question about this Accessories and Part?