Adapter to Mount Awning on Thule Crossbars on 2022 Subaru Outback Wilderness

Question

Question:

Im looking for the adapters to mount either a Rhino awning or a Yakima awning on a Thule Rack on my 2022 Subaru Outback Wilderness. I couldnt find them searching your site. I appreciate the help. Thank you.

asked by: Sven G

0

Expert Reply:

There are a few different possibilities depending on what crossbars you have and what specific awning you would like to mount. If I had to guess you probably have Thule WingBar Evo Crossbars # TH711320 on your Outback Wilderness. If you wanted to use the RhinoRack Batwing Awning # RR33100 or # RR33200 no additional parts would be necessary.

If you want a simple awning from Rhino-Rack like the Sunseeker # RR32133 or # RR32132 then you would need mounting brackets. Both the angled up # RR32123 and angled down # RR32127 brackets would allow you to mount the awning on your Thule rack.

Like the Batwing, the Yakima SlimShady Awning # Y36VR does not require an adapter. This installs by clamping onto the crossbars and will fit WingBar Evo Crossbars. If I had to choose between this and the Sunseeker I would go with the Sunseeker. It does require the extra brackets, but those allow you to keep it out of the way for full use of your crossbars.

I have attached some review videos on the different awnings below for your reference.

expert reply by: Robin H

0

Answer 1

If you don't have at least 10" from the top of your Telluride's rails or want to park it outside, while the basket is attached, you may be making a mistake. The Yakima OffGrid item #Y07138 you were looking at is 7"…

view full answer...

Answer 2

The Rhino-Rack Sunseeker Awning - Roof Rack Mount - Bolt On - 55 Sq Ft #RR32133 and Rhino-Rack Sunseeker Awning - Roof Rack Mount - Bolt On - 49 Sq Ft #RR32132 can be installed on the Thule Aeroblade Edge crossbars using the Mounting Brackets for…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

The best hitch for a 2024 Subaru Outback is the etrailer item #e25TR. This hitch is custom fit and bolts to your Subaru with included hardware. This is a class III hitch with a 2" receiver, that has a 3,500 lbs towing capacity and a 350 lbs…

view full answer...

Answer 7

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 8

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 9

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

view full answer...

Answer 10

The equivalent hub assembly to CE Smith Trailer Hub Assembly #CE13100 that has lug bolts built in is part #CE13110. The Inner and outer bearings (L44643) and races, and grease seal are all pre-packed in this fully assembled hub with marine-grade…

view full answer...

Answer 11

A trailer's wiring harness, like #118467 doesn't necessarily have to be stored in the rear cargo area. However, in a lot of vehicles there isn't access out of the rear cargo to underneath. It's also better for the wiring to keep it…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Adapter to Mount Awning on Thule Crossbars on 2022 Subaru Outback Wilderness

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching