These artificial rain gutter plates bolt to the sides of your vehicle roof and provide mounting points for 2 Rhino-Rack gutter-mount roof-rack legs. This system allows the use of a traditional roof rack on raised or sloped roofs. Drilling required.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a quick look at the Rhino-Rack Artificial Rain Gutters. Now this is going to come with a quantity of two, one for either side. This is going to be a great kit for those applications where a traditional roof rack just won't fit on it's own. Things like maybe a Jeep with a hard top, or a truck that has a camper shell on the back, something along those lines. Now if you need an additional set, or four clamps in total, you can just pick up an extra part number of this to give you that complete kit. We'll get two brackets, again one for either side.
This is the mounting plate that our rain gutter feet will actually fit in to, then we'll also have our backing plate, and some adhesive to get everything in place. We'll get six bolts, washers, and lock nuts. Along with some instructions to help get everything installed properly.Now there is drilling required with this application, so keep that in mind, you will have to drill into your vehicle to get these installed. As far as the dimensions on our brackets, it's about 6-1/2" long, by about 1-1/2" wide. That's going from this edge down to this edge, so it'd be 1-1/2" tall.
And then the depth of it going from where it's going to actually lay flat against your vehicle out, it's just about 7/8" of an inch deep. The other portion of our bracket is about 7-1/8" long, by about 1-5/8" wide, and that's going to be about 1/16" deep. The distance between our mounting holes, the furthest ones are going to be about 5" center to center, each one is going to be about 2-1/2" center to center. And that'll be the same for our other bracket as well, about 2-1/2" between those mounting holes. The adhesive is about 8-3/4" long, by about 2-1/4" wide.This does come with a limited lifetime warranty from Rhino-Rack.
And that's going to do it for our look at the Rhino-Rack Artificial Rain Gutters, in a quantity of two.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.