Dimensions of Outside Plate of Rhino-Rack # 739AHALF

Question

Question:

What is the plate dimensions of Rhino-Rack # 739AHALF. You note its 6 1/2inch wide, but how tall is the outside plate ? Also what are the inside plate dimensions. it looks to be much bigger that the outside mount. My cap starts to curve where I need to mount these. Thanks

asked by: Alan T

1

Helpful Expert Reply:

I spoke with my contact at Rhino Rack and they informed me that the dimensions you are looking for are:

Outside plate is 1-1/2” tall.
Inside plate dimensions are 1-1/2”x7”.

expert reply by: Jameson C

1

Answer 1

I can help you find a rack that will work for your 2012 Ford F-150 Super Cab. Unfortunately, it will not be the Rhino Rack 2500, part #RR29YR. That rack is not compatible with your vehicle. This rack will have to be pieced together, a la carte. This…

view full answer...

Answer 2

Yes, the artificial rain gutters part #739AHALF will fit on a 2014 Jeep Wrangler. These are a universal fit design so they would work well on your hardtop.

view full answer...

Answer 3

The Inno and Thule square crossbars both share a 7/8 x 1-1/4 inch height and width, so it's very likely the Inno #IN72FR feet would be compatible with the Thule crossbars. However, we have not tested this so we cannot guarantee fit. Also, keep in…

view full answer...

Answer 4

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 5

The Rampage tow mirrors part #RA8605 are a fit for your 2015 Jeep Wrangler and would eliminate a blind spot. Basically you would just need to adjust both mirrors so that all viewing angles are covered. I attached an install video for this mirror for…

view full answer...

Answer 6

The Rhino-Rack Batwing Awning #RR33100 has 4 segments that come off of the vehicle that are 98" long, and has a 118 sq ft coverage.

view full answer...

Answer 7

Yes, we do have a roof rack that will work with the rounded roof on your Interstate cargo trailer. It is the Rack'Em Fitz-All Enclosed Trailer Ladder Rack item #RA-28. This roof rack has a 400 lbs capacity and mounts to the side of your trailer…

view full answer...

Answer 8

I do have an RV trailer hitch receiver that may work for you in the Adjustable Width Trailer Hitch Receiver part #13703. The hitch receiver will fit trailers with frame rails from 22" to 72" apart. The frame brackets sit about 3" down…

view full answer...

Answer 9

There will not be much difference in ride smoothness between a fully-inflated 35-psi rated tire and a fully-inflated 90-psi rated tire, but typically a radial will give a slightly smoother ride than a bias ply tire since it has a more flexible…

view full answer...

Answer 10

With a few possible exceptions (large fifth wheels that use LT or Light Truck Tires), we recommended that only trailer tires be used on trailers because they have stiffer sidewalls which do a better job dealing with the vertical load tires experience…

view full answer...

Answer 11

I went out to the warehouse and pulled Thule Artificial Rain Gutters #TH542. When assembled the overall length is 6-1/2 inches wide by 1-3/4 inches tall. I made a video showing the measurements I took. The rain gutter plate mounting surface by itself…

view full answer...

Dimensions of Outside Plate of Rhino-Rack # 739AHALF

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching