Remote for Redarc Pure Sine Wave Inverters - 150 to 3,000 Watt - 12V

Video Transcript for Review of Redarc Pure Sine Wave Inverter Remote - RED95RR

Hi there, I'm Michael with etrailer.com. Today we're going to take a quick look at this Redarc-Pure-Sine-Wave-Inverter-Remote. Now this is going to be a fixed mount remote that lets you monitor and control your Redarc-Pure-Sine-Wave-Inverter from inside your RV. It does come with this 26 foot long cable that will connect between your inverter and the remote here. So that's going to give you plenty of options to make sure that this is mounted in a convenient location for you. It does have the power button there so that you can turn your inverter on and off very easily.

On the backside here, you can see we do have an internal jumper pin, which you won't be able to see unless you remove the screws here. And then an auxiliary power connection. So these can be used together to automatically turn your inverter on or off when power is applied to that connection there. So your return override function will turn the inverter on when power is applied. Like when you turn your vehicle's ignition on.

The ignition lockout function will turn the inverter off when the power is applied. So depending on which one works best for your setup. We do have the LED indicator here that's going to monitor your inverter status. So it is going to give you a solid red line for your running, or not line, solid red light for running. And then a fast blinking for that return override function, or slow blinking for your ignition lockout function.

So you'll be able to tell what is operational there. And this is going to be a flush mount design. So it is going to be very sleek and integrated into your RV. The mounting hardware is not included but simple screws there will get this mounted in place. We'll give you a few dimensions here, make sure this will fit where you're thinking it will go.

So our width, we're looking at right about 2 and 3/16, just shy of 2 and quarter of an inch wide, by just shy of 3 inches tall, call it 2 and 7/8 of an inch. On the backside here we've got a 1 and 3/4 inch diameter, and right at 1 inch deep. So if you are looking for a more convenient way to operate your inverter, rather than having to get out of your RV and get into your storage compartment area where it's located, this is going to be a much easier way for you to not only turn it on and off, but also see how it's operation, operating. So that completes our look for today. Again, I'm Michael with etrailer.com. Thanks for watching..