Replacement 3-Wire Pigtail For Tail Light On 2011 TrailStar Boat Trailer
Question:
I have 2011 Nirtro boat on a TrailStar Trailer that was made in 2010. Trailer number is 4TM14HF1XBB001623. There is a three way quick connect in the trailer lights that connects the back right brake light and light beside the brake light. I can send a picture of the quick connect. The quick connect is approximately 4 inches longs. The main breaks off to the brake and side light. I messed up the connection putting boat in basement. Would you have this part? I can send pictures. Thanks,
asked by: Rob S
Helpful Expert Reply:
We offer a couple different 3-way pigtails that are typically used for a sealed trailer tail light that may work for you.
The first is a right angle 3-wire plug, part # A47PB. It has three wires, a red, black, and white. The red is a turn signal, the black is the tail signal and the white has a ring terminal on it and is designed to be the ground that needs to be attached to a clean metal surface. The 3-way plug is designed to plug into the back of a sealed light. For a straight 3-wire pigtail I recommend part # A45PB.
I was unable to find the details for the lights you have on your trailer. If you can let me know the model number and manufacturer of the tail light you have on your trailer, I may be able to find a replacement or see if the 3-wire pigtails we offer are designed to work with your light. You can typically find the model and make of the light on the body of the tail light. it will not be listed on the lens.
Products Referenced in This Question
3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Straight Pigtail
- Optronics
more information >
Product Page this Question was Asked From
Right Angle 3-Wire Pigtail for Optronics Trailer Lights - 3-Prong PL-3 Plug - 10" Lead
- Accessories and Parts
- Trailer Lights
- Wiring
- Plugs and Pigtails
- 10 Inch Long
- Three Wire
- Right Angle Pigtail
- Optronics
more information >
Continue Researching
- Article: Trailer Maintenance Schedule
- Search Results: hitch lock
- Search Results: trailer grease
- Search Results: trailer coupler locks
- Shop: Anti-Rattle Trailer Hitch Receiver Lock for 2" Hitches - 3-1/2" Span
- Shop: Hub Bearing Kit for Lippert, Dexter, and AL-KO Axles - 3,500 lb with #84 Spindle
- Shop: Trailer Wiring Junction Box - 7 Color Coded Terminals - ABS
- Video: Optronics LED Submersible Tail Light Review and Installation STL16RB
- Video: Optronics LED Combination Trailer Tail Lights Installation
- Video: Optronics LED Trailer Tail Lights with Grommet and Pigtails Review
- Video: Optronics Trailer Lights - Tail Lights - STL17RB Review
- Video: Buyers Products 7 Color Coded Terminal Trailer Wiring Junction Box Review
- Shop: LubriMatic Professional Pistol Grease Gun
- Shop: Bearing Buddy Bearing Protectors - Model 1980A-SS w/ Auto Check - Stainless Steel (Pair)
- Shop: Spindle Grease Seal Set for L44643 Inner Bearing and 1.980 Bearing Buddy
- Shop: Mounting Bracket 4-Pole Flat
- Q&A: How To Wire In The Hopkins 7-Way Molded Trailer Wire Connector
- Q&A: Replacement Wiring Harness For a Adams Drift Boat Trailer
- Q&A: Bearing Buddy for Hub with 1.928 Hub Bore & 09074 Outer Bearing
- Q&A: Functions of the Three Wires on Trailer Taillight Harness A47PB
- Q&A: LED Trailer Taillight Recommendation that Has License Plate Light
- Q&A: Do the Tail Lights in Trailer Light Kit # TLL12RK have Reflective Lenses
- Q&A: Right Hand Taillight Recommendation to Match the part # STL37RB
- Search Results: bearing buddy
- Search Results: 4 wire junction box
- Search Results: 4 wire flat dust cover
- Search Results: st36rb