Ceiling Garnish for MaxxAir MA00-07500K (00-07500K) Deluxe Roof Fan

Question

Question:

This one will not fit a maxxair max fan deluxe 7500k, do you have one that will in black? Fan model number: 00-07500k

asked by: James

0

Expert Reply:

I reached out to my contact at MaxxAir and the only ceiling garnish they make for the MA00-07500K deluxe roof fan is the MaxxAir # MA54FR garnish in white. I think if I really wanted black I would consider some black textured spray paint.

expert reply by: Les D

0

Answer 1

From the sounds of your question, it looks like you are looking for a hitch solution that allows you to fit a full-sized spare tire underneath your 2021 Winnebago Solis Motorhome. The only feasible option is a hitch that is designed to work with your…

view full answer...

Answer 2

The Atwood #AT15028-22 Air Command Rooftop Air Conditioner w/ Heat Pump requires a dedicated 20 amp circuit. For a 20 amp circuit, the smallest acceptable wire gauge would be 12 gauge. Given the size of the space, this particular unit would work…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 9

I definitely understand being a bit overwhelmed by the amount of options in front of you, however I can definitely help with differentiating the trailer hitches for your 2019 Subaru Outback Wagon along with explaining my personal recommendation,…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 12

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

view full answer...

Ceiling Garnish for MaxxAir MA00-07500K (00-07500K) Deluxe Roof Fan

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching