Mount your ToyLok retractable cable lock in your hitch with this kit. ToyLok cable lock attaches to mounting bracket and slides into your trailer hitch. Fits 1-1/4" and 2" receivers.
Features:
Specs:
Your ToyLok retractable cable lock will attach to the bracket differently depending on which lock model you have.
As shown above, the 15' long ToyLok retractable cable lock (LC337120) attaches to the mounting bracket via attachment points on the bottom of the lock housing, requiring that the lock be mounted upside down. Conversely, the 18' long ToyLok retractable cable lock (LC337118) attaches to the mounting bracket via attachment points on the top of the lock housing. Once your ToyLok is attached, the receiver adapter can be inserted into your hitch in either the drop or rise position.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number LC337111. This is the Lippert Hitch Mounting Kit for Lippert ToyLok Retractable Cable Locks. It is designed to fit either 1 1/4" hitches or 2" hitches. Basically, this adapter kit right here will let you mount your ToyLok retractable cable lock into your hitch. The cable lock housing will bolt to this mounting bracket with the included hardware shown here. This is a sturdy steel construction, is rust resistant, black, powder coat finish.
This adapter sleeve is included. It's designed just for the 1 1/4" hitches and if you want to use it in a 2", the adapter sleeve would snap right on and you would slide it into a 2" opening. The hitch pin and clip or the hitch lock we do sell separately. Again, the application on this is for 1 1/4" or 2" trailer hitch receivers. I do want to give you an example of what this is used on. I have an example.
This is a ToyLok. This happens to be the 15' cable model. We do sell this separately on our website. What this does is this actually attaches to your trailer or RV. You can pull this cable out, run it through items, lock it back to here with a padlock and it secures those items, so what this part here is for is if you turn this ToyLok over there's 3 holes here that have threaded holes in them.
What you can do is take this bracket, line the holes up, use the screws and the washer just like that. Let's do another one. Line the hole up. There we go. Tighten that one down and line the back one up.
It comes with a nice tamper-proof bit here. What's nice about it is it has a hole drilled in the middle so it's not a regular Allen wrench you're using. You've got to use this actual bit to tighten those down. Once you tighten those down securely, I just got them snugged up a little bit, basically what it allows you to do is take this ToyLok cable lock right here and then I'm going to give you an idea of, here's a 2" hitch receiver right here. It allows you to, I put the adapter sleeve on, you can slide this into the hitch on your RV or trailer and just like that you have a spot where your ToyLok cable lock is attached to, so pretty easy as that. Then you could pull the cable out and secure your items you want to and again, the nice feature I want to mention again is the tamper proof. Once you lock items down somebody might think, "Well, we'll just unscrew these." We're using this tamper proof bolt. They can't put anything in there to loosen it up. We'll pull this all out. That should do it for the review of part number LC337111. It is the Lippert Hitch Mounting Kit to fit on the Lippert ToyLok Retractable Cable Locks. .
Average Customer Rating: 5.0 out of 5 stars (2 Customer Reviews)
Mount your ToyLok retractable cable lock in your hitch with this kit. ToyLok cable lock attaches to mounting bracket and slides into your trailer hitch. Fits 1-1/4" and 2" receivers.etrailer is fantastic, fast delivery, good contact. They had the part I needed at a great price. Realized the best solution to mounting my Toylok is with a receiver hitch bracket! that way I can put it on the back of my Toyhauler, the back of my UTV or the back of my truck. Ideal, makes it multi purpose.
Chris I
Arizona
The seller got a hold of me right away told me the company that was making the first item trailer frame mount was out and they where stopping production on it. Seller was offering other types to replacements . We agreed to the hitch style, they got on it right away sending it out received it in a few day. Seller did a great job of contacting me and fixing it. Will be ordering other thing from them soon.
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.