Kit lets you mount your ToyLok retractable cable lock in your pickup truck's stake pocket so you can keep gear safe and secure during transport. Fits most full-size pickups. Attaches to driver's-side stake pocket that is closest to your cab.
Features:
Specs:
Your ToyLok retractable cable lock will attach to the bracket differently depending on which lock model you have.
If you have the 15' long ToyLok retractable cable lock (LC337120), then you will need to bolt the included bracket onto the bottom of the lock's nylon housing. If you have the 18' long ToyLok retractable cable lock (LC337118), then you will need to bolt the included bracket onto the top of the lock's steel housing.
Two different mounting blocks are included to provide you with the perfect fit for your truck bed stake pocket.
Mounting option 1 is for installations in stake pockets that have enough clearance to fit the 3-1/2" long x 1-1/4" wide mounting block. Mounting option 2 is for stake pockets that are a bit smaller and can only receive the 2-7/8" long x 1-1/4" wide mounting block. Both mounting options use a 3/8" bolt (included) to secure the bracket to the truck.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number LC337112. This is the Lippert Truck Bed Stake Pocket Mounting Kit for the Lippert ToyLok Retractable Cable Locks. This adapter kit woill let you mount your ToyLok retractable cable lock in your truck bed stake pocket. The cable lock will bolt to this bracket with the included hardware. I just want to show you an example, we do sell the ToyLok separately, this is it. This is the ToyLok Retractable Cable Lock.
Basically, this is used to . You can attach this to your trailer or your vehicle. Run pull this cable out, run it through items you want to secure. Run it back through here and then you use the included padlock that comes with the ToyLok to attach it secured. When you're not using it just pull it so that it retracts back to its case. Basically, this bracket for this part number I'm mentioning is the bracket that goes into a truck state pocket.
Its a sturdy steel construction. Its got a nice rust-resistant, black powder coat finish. It is an easy, no drill installation. It is designed for installation in the driver's-side stake pocket closest to the cab. There is 2 mounting options, you could see the two different size blocks that are used in the stake pockets.
Basically these two block sizes will fit most of the stake pockets out there. Basically what you would do, I'm just going to show you, you would mount your . As you can see on the back of the ToyLok, it has the three threaded holes. This would line up with the bracket just like that. We will take your included mounting bolts. Go ahead and just thread those in.
The nice thing about this, if you look at the bowl, it actually is a theft resistant bolt. If you notice it's not just a standard allen 00:01:44 bolt. It has a little pin in the middle that keeps your regular wrench from going in it. You do have to use this drive special, drive socket that comes with it to install it or remove it. Once we get this, I'll just snug them down. Just to give you an idea what it's going to look like. Basically, this will install in the stake bed pocket and you'll see the ToyLok, you'd be able to pull your cable out and secure any items in your truck bed or on your trailer. Basically, again, with how you would install this into the stake bed, you pull the correct block that you need. Then this would go, this is a rubber block with a metal plate on the end, threaded metal plate. This would go into this stake bed pocket like that. Drop your bolt through here and then drop it through the rubber and then it would screw into that metal plate as you tighten it down as would it expand that rubber block that would hold it in place in your stake bed pocket. Again, the other nice features on this bolt also that attaches the bracket kit to those stake bed, you can see it's also theft resistant. Uses this special driver to install it or remove it. Also, they include this protective rubber pad, it'll fit under this mounting bracket. It has one side, you can see on one side you just peel that right sheet off, it'll be sticky. You just line that up like that with the hole. That will also help protect the bed rail of your truck just like that. That should do it for the review of part number LC337112. This is the Lippert Truck Bed Stake Pocket Mounting Kit for the Lippert ToyLok Retractable Cable Lock. .
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.