Replacement Footpad Kit for Lippert Hydraulic RV Landing Gear - 12" Diameter
(16 reviews)
Price: $75.05
In Stock
Replacement Footpad Kit for Lippert Hydraulic RV Landing Gear - 12" Diameter
Item # LC86UD
Our Price: $75.05
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (16)
- Q & A (0)
- Videos (1)
- Photos
Lippert Accessories and Parts - LC86UD
- Camper Jacks
- Jack Foot
- Lippert
Replaces (1) 12" round footpad with installation hardware for your Lippert hydraulic RV landing gear.
Features:
- Replaces a round footpad for your Lippert hydraulic landing gear
- Footpad diameter: 12"
- Includes footpad, O-rings, washer, and mounting bolt
Fits:
- All Lippert hydraulic RV landing gear that require 12" footpads
696887 Replacement Footpad Kit for Lippert Hydraulic RV Landing Gear - 12" Diameter
Video of Replacement Footpad Kit for Lippert Hydraulic RV Landing Gear - 12" Diameter
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Lippert Replacement 12 Inch Diameter Landing Gear Footpad - LC86UD
Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Lippert replacement foot pad kit. This is going to replace one round foot pad on your Lippert hydraulic landing gear. This will work for any of the Lippert hydraulic RV landing gear that require a 12-inch diameter foot pad. And as you can see, this is a 12-inch diameter foot pad here. So it is going to be a great option for you, because this is a direct replacement from Lippert, and you can trust it is gonna be exactly what you need.
You're not going to need to worry about fit issues or compatibility problems. They do include the mounting bolt, washer, and O-rings with your foot pad here. So if you are needing to replace one of those 12-inch diameter foot pads, this is gonna be exactly what you need. That's gonna complete our look for today. Again, I'm Michael with etrailer.com.
Thanks for watching..
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Replacement Footpad Kit for Lippert Hydraulic RV Landing Gear - 12" Diameter - LC86UD
Average Customer Rating: 4.6 out of 5 stars (16 Customer Reviews)
Replaces (1) 12" round footpad with installation hardware for your Lippert hydraulic RV landing gear.by: David L.03/20/2024
The standard 9” landing feet crumple under the weight of a diesel pusher motorhome’s rear weight. These were an absolute necessity to distribute the weight over a larger area and prevent crumpling jack feet pads.
by: David04/28/2024
Excellent service by Kurt and others at etrailer. I finally got the right jack feet on my Tiffin Phaeton. Thanks for all the help.
by: Bobby 02/02/2024
I bought 12 foot plates for my class A motor home with the matching snap plate pads and both were extremely easy to install. No more getting on your knees to place the pads under the jacks. My wife is very happy.
by: Lawrence08/26/2023
Purchased these 12" jack feet to replace the undersized 9" feet that REV provided on our Holiday Rambler 40' Armada. The stock rear 9" feet bent almost immediately when using on gravel. I replaced them with these 12" feet but will not take a chance on them bending so I use jack pads under the jack feet now when parked on any surface except concrete..
by: Rich04/03/2022
I wanted to install Snap Pads but since all 4 footpads were mushroom shaped I knew that would be impossible, so replaced all 4. Installation was easy, to torque the mounting bolt to 132ft/lbs it was necessary to drop a screwdriver through one of the small holes in the foot so it would jam against the frame. None of original bolt were more than about 10 lbs torque so I wonder if they were torqued at the factory.
Also increased the original 9" front feet with 12". The fronts were the most mushroom shaped and hopefully the larger foot pads will support the weight better. There was no clearance issues with my Thor Tuscany.
Regarding shipping, one of the boxes was opened when received, everything was still there but I hate receiving packages that were opened during shipping.
by: Thomas 09/13/2023
Easy change out. Get some Blue Loctite for your installation. 2018 Thor Aria 3901
by: Bill 10/20/2022
Easy to order and find what you need on the website. Product delivered in a timely manner. Will be installing weekend of 10/22/2022. The foot pads seem to be very well made, I will know more once installed and put to use. I have ordered several things this past year from E-trailer with no issues. Good company
by: Mark 08/14/2023
Fast shipping.
by: Robert 09/01/2022
Robert
9/4/2023
They seem to be stronger than the original pads. No complaints
by: Mario 07/03/2023
by: Randy 03/28/2024
by: Randy 12/05/2023
by: Barry 04/13/2023
by: David 04/17/2023
by: William 08/05/2022
16
16
See what our Experts say about this Lippert Accessories and Parts
- Installation Order For Lippert Replacement Footpad Kit # LC86UD You are correct, the Replacement Footpad Kit # LC86UD is mounted with the bolt, flat washer, o-ring, footpad and finally the 2nd o-ring before threading into the base of the hydraulic jack.
view full answer...
Info for this part was:
Edited by:
Lindsey S
Written by:
Mike S
Installed by:
Michael B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Rich
4/3/2023
The Snap Pads & footpads have held up well, no deformation and the Snap Pads have remained secure. When I installed the Snap Pads I sprayed the interior and bottom of the feet with spray Flex Seal, this worked both as a lubricant for installation and to secure them in place. After installation I sprayed the tops of the feet to reduce the chances for rusting. So far this has worked great.