Recommended Replacement Wheel Bolts for a Trailer With M12 Metric Wheel Bolts
Question:
I have one lug nut I can not get to thread on the wheel. Can you tell me what type thread they are? I bought a m12 1.50 and it doesnt seem right. If that is correct, then it must be the bolt. I am not sure if I should force it to tighten. I am afraid of damaging it. Both the one I had and the one I bought get about 1/2 in the but then lock up.
asked by: Keith K
Helpful Expert Reply:
The Lionshead Trailer Wheel Lug Nut # LHLR103 you're looking at will fit on 1/2" wheel bolts, and has 20 threads per inch.
If you have metric wheel bolts you'd need to use lug nuts that are also metric or swap out your current wheel bolts with more standard sized wheel bolts like the Replacement Wheel Stud, Screw-In # 25-53 which have the same 1/2" x 20 threads as the lug nuts you were looking at.
This would by far be the easiest solution as you're going to have a much harder time finding matching metric lug nuts in the US.
Products Referenced in This Question
Replacement Wheel Stud, Screw-In, 1/2" x 2"
- Accessories and Parts
- Boat Trailer Wheels
- Trailer Hubs and Drums
- Trailer Tires and Wheels
- Wheel Studs
- 1/2 Inch Diameter
- Screw-In Stud
- 2 Inch Long
- Redline
more information >
Product Page this Question was Asked From
Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel - Qty 1
- Accessories and Parts
- Boat Trailer Wheels
- Golf Cart Tires and Wheels
- Trailer Tires and Wheels
- Wheel Lug Nut
- 1/2 Inch Wheel Bolt
- Hex Nut
- 3/4 Inch Outer Diameter
- 60-Degree Cone
- Stainless Steel
- Lionshead
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Malone LowBed MicroSport Trailer for 2 Heavy Kayaks - 7' Bunks - 800 lbs
- Q&A: Lug Nuts that Fit Malone MicroSport Trailers
- Shop: Lionshead Trailer Wheel Lug Nut - 1/2"-20 - Stainless Steel - Qty 1
- Q&A: How Tight Should Shackle Bolts Be Tightened On Trailer
- Shop: Replacement 12 mm x 1-1/2" Hub Wheel Stud for Demco Kar Kaddy SS Tow Dolly - Qty 1
- Shop: Replacement Chrome Lug Nut for Kar Kaddy Tow Dolly - Qty 1
- Shop: CE Smith Trailer Wheel Lug Nut - Zinc-Plated Steel - 1/2" - Qty 1
- Q&A: How To Determine the Correct Size Lug Nuts For a Trailer
- Q&A: Can the Malone EcoLight Sport Trailer Carry Two 12 Foot Kayaks Weighing 105 Pounds
- Q&A: Replacement Lug Nuts for Malone EcoLight Trailer
- Shop: etrailer Hitch Pin Alignment Collar for Hitch Accessories - 2" Hitches
- Search Results: hitch
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Hitch
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: Picking Out Replacement AC Shroud for Coleman Mach
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Search Results: trailer lights
- Article: Trailer Wiring Diagrams
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Search Results: trailer hitch
- Shop: Suspension Enhancement
- Search Results: trailer brake controller
- Video: etrailer.com Trailer Hitch Installation - 2014 Ford Escape
- Article: How to Measure for Trailer Hitch Drop
- Shop: Brake Controller
- Article: My Trailer Hitch Doesn't Fit
- Search Results: 25580
on Accessories and Parts
