Summer Starts Here - Save up to 70%
Build an RV sliding cargo tray with this trim kit, a rail kit (sold separately), and a plywood bottom (not included) to easily retrieve gear without crawling into your compartment. Included trim pieces prevent cargo from sliding off during travel.
Features:
Specs:
Pair this tray trim kit with a rail kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper. The complete tray lets you store and organize camping and hiking gear, tools, and power cords, so your compartment doesn't become too cluttered. It also glides out when you need it so that you don't have to crawl into the dirty or cramped compartment in order to retrieve your belongings.
Determining Which Tray Trim Kit You Need
To figure out which tray trim kit you need, measure the width of your cargo compartment opening, and then subtract 4. For example, for this 32" trim kit, your cargo compartment should measure 36" wide. This ensures that the tray would have the proper clearance as it slides in and out.
If your cargo compartment is smaller or larger, please reference the table below to determine which trim kit you would need.
| Width of Cargo Compartment | Trim Kit You Need |
|---|---|
| 27" | LC370674 (23") |
| 28" | LC370676 (24") |
| 31" | LC370678 (27") |
| 34" | LC370680 (30") |
| 36" | LC370682 (32") |
| 37" | LC370684 (33") |
| 40" | LC370688 (36") |
| 41" | LC370690 (37") |
| 43" | LC370692 (39") |
| 48" | LC370755 (44") |
| 52" | LC370757 (48") |
| 55" | LC370759 (51") |
Find the rail kit you need to complete your setup:
The rail kit needed to complete your SuperSlide II is sold separately. To determine which rail kit you need, simply measure the overall inside length of your cargo compartment. Whatever measurement you get is the minimum length of the rail kit that you will need. Depending on your RV or camper setup, you might need to go with a rail kit that is slightly smaller than your cargo compartment to account for any potential clearance issues.
| Length of Cargo Compartment | Rail Kit You Need |
|---|---|
| 42" | LC370782 (42") |
| 48" | LC370783 (48") |
| 54" | LC370785 (54") |
| 60" | LC370787 (60") |
| 80" | LC370761 (80") |
| 90" | LC370762 (90") |
This trim kit includes 2 end trim pieces, 3 mid-rail trim pieces, 2 jig cross strips, 4 jig knee braces, and 40 rivets. Once the rail kit (sold separately) has been assembled, mount the end trim pieces and the mid-rail pieces to the rails using the rivets. Then after the carpeted wood bottom (not included) has been installed, use the rest of the rivets to install the jig cross strips and jig knee braces.
Once the tray has been completely assembled, place it onto the floor of the cargo compartment, and make sure there's adequate clearance for the compartment door. Depending on your setup, you may need to raise the rails with 2x4s (not included). Once the tray is fully aligned, use the integrated mounting tabs on the rails and hardware (not included) to bolt it down.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the 32" long Trim Kit for the Kwikee SuperSlide Two Tray Assembly. Now, this trim kit here will provide the end pieces, the mid-rails needed to complete your SuperSlide Two tray assembly for RV cargo compartments. Now, the SuperSlide Two tray assembly we do sell that part separately on our website. This kit here will include everything laid out here. It's got the two end trim pieces, the three mid-rail trim pieces right here in the middle, and then over here, the longer bars, we have the two slide square jig cross strips, and over here the four slide square jib knee braces. Comes also with a bag of 40 rivets for installing everything and a nice set of detailed installation instructions.Now, the end trim pieces, which are these two larger pieces right here, these are designed to help keep the cargo from sliding off of your tray.
The three mid-rail trim pieces here, these will help provide extra support, and then the square jig cross strips and knee braces, they're used to help keep your slide-out square when it is being assembled.These parts are made in the USA. Few specs on this. I measured all these just to give you an idea, so on the end trim pieces, they're going to be right at 32" long. The height on it is going to be right at 4-1/2 tall, and that's on these two pieces. These three pieces here, the mid-rail pieces, they're going to be right at 31-3/4 long, and the width on them is going to be right at 3 wide.The knee braces, which are the smaller ones, these are going to measure length-wise right at 18-3/4, and the width on them is right at 5/8.
On the cross strips, which are the two longer ones, these are going to measure length-wise, oops, there we go, right at 29-3/8, and they're going to be the same 5/8 wide. That should do it for the review on the 32" long Trim Kit for the Kwikee SuperSlide Two Tray Assembly.
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
Build an RV sliding cargo tray with this trim kit, a rail kit (sold separately), and a plywood bottom (not included) to easily retrieve gear without crawling into your compartment. Included trim pieces prevent cargo from sliding off during travel.These rails are exactly what I need for my specialized application - a coffin slide mechanism for a crypt-themed escape room. They arrived on time and in good condition. They are bulletproof and appear to be well made. My application will need a slide that can function again and again many times a day for years to come. These slide rails look to be a great place to start. I got great service from order to receipt of product... I would definitely order from this vendor again!
Very sturdy, just what we were looking for to add a pull out box to a survey truck. Box screws on and the rails bolt to the bed of the truck.
Just received the product. It appears to be robust and good quality. I have not installed it in my RV yet.
Very good product and a great company to work with even if you have issues with a product they try to make it right
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.