Build an RV sliding cargo tray with this rail kit, a tray trim kit (sold separately), and plywood bottom (not included) to easily retrieve gear from your compartment. Included rails slide tray out so you don't have to crawl into your compartment.
Features:
Specs:
Pair this rail kit with a tray trim kit (sold separately) and a carpet-covered plywood bottom (not included) to create a complete slide-out tray for the cargo compartment in your RV or camper. The complete tray lets you store and organize camping and hiking gear, tools, and power cords, so your compartment doesn't become too cluttered. It also glides out when you need it so that you don't have to crawl into the dirty or cramped compartment in order to retrieve your belongings.
Determining Which Rail Kit You Need
To figure out which rail kit you need, simply measure the overall inside length of your cargo compartment. Whatever that measurement is will be the maximum length the rail kit can be. For example, for this 60" rail kit, your cargo compartment should measure at least 60" long. Depending on your RV or camper setup, you might need to go with a rail kit that is slightly smaller than your cargo compartment to account for any potential clearance issues.
If your cargo compartment is shorter or longer, please reference the table below to determine which trim kit you would need.
| Length of Cargo Compartment | Rail Kit You Need |
|---|---|
| 42" | LC370782 (42") |
| 48" | LC370783 (48") |
| 54" | LC370785 (54") |
| 60" | LC370787 (60") |
| 80" | LC370761 (80") |
| 90" | LC370762 (90") |
Find the trim kit you need to complete your setup:
The trim kit needed to complete your SuperSlide II is sold separately. To determine which trim kit you need, measure the width of your cargo compartment opening, and then subtract 4. For example, if your cargo compartment measures 55" wide, then you would need a 51" trim kit. This ensures that the tray would have the proper clearance as it slides in and out.
| Width of Cargo Compartment | Trim Kit You Need |
|---|---|
| 27" | LC370674 (23") |
| 28" | LC370676 (24") |
| 31" | LC370678 (27") |
| 34" | LC370680 (30") |
| 36" | LC370682 (32") |
| 37" | LC370684 (33") |
| 40" | LC370688 (36") |
| 41" | LC370690 (37") |
| 43" | LC370692 (39") |
| 48" | LC370755 (44") |
| 52" | LC370757 (48") |
| 55" | LC370759 (51") |
This rail kit includes inner rail and outer rail assemblies. First you will need to assemble the rails together by sliding the inner rails all the way onto the outer rails. Then install all of the pieces of the tray trim kit (sold separately) to the rails. Lastly, install the carpeted wood bottom to the rails with wood screws (not included), and there are 2 ways that you can do this. You can measure the areas in between the mid-rail pieces and then cut out plywood inserts to fit. Those uncovered pieces then act as dividers to prevent smaller items from shifting around too much. Or, as another option, you could cover the entire bottom with 1 long piece of plywood for a full-length tray floor.
Once the tray has been completely assembled, place it onto the floor of the cargo compartment, and make sure there's adequate clearance for the compartment door. Depending on your setup, you may need to raise the outer rails with 2x4s (not included). Once the tray is fully aligned, use the integrated mounting tabs on the rails and hardware (not included) to bolt it down.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com and today we're going to take a look at this Rail Kit for the Kwikee SuperSlide II RV Storage Slide Out Tray Assembly. Now these rails are going to pair with a Tray Trim Kit which is sold separately to form a slide out tray for your RV or camper's cargo compartment to give you the ability to store camping or hiking gear or tools and power cords and a whole lot more. This is going to require a carpet covered plywood, which of course is again not included with this, for the bottom of the entire assembly. Now this is going to fit RV cargo compartments at least 60 inches long. And the tray weight capacity, when this is fully assembled and installed, is going to be 800 pounds.
Now the sliding design is going to eliminate the need for you to crawl into a dirty or cramped compartment. (metal sliding) And then the spring loaded latches are going to lock the rails in the stowed position to prevent it from sliding out while traveling. Now obviously, as you can see here, I have this set up somewhat precariously on some blocks just to give you an idea of what this is going to look like when you have this put together. I don't have this bolted down or anything like that so it's of course going to be a whole lot more stable when you actually have this installed. But I'm just using this bracket and this rail here just to give you an idea of the the sliding operation here.
And then of course it's going to lock (metal clicking) into place just like that. So you're not going to have to worry about this sliding out while you're going down the road. And then you're just going to move this latch down and that's going to unlock it to allow you to slide this out. And of course this is going to slide as well. So hopefully that kind of gives you an idea of how this works, what this looks like.
This is made here in the USA of a durable steel construction with this rust resistant powder coat finish. These are an easy bolt on installation into your cargo compartment. The preassembled rail assemblies with instructions that you see right here, are all included. However, I do want to mention that the wood screws and the five sixteenths of an inch hardware are not included, so just be aware of that. So to determine which rail kit you need, simply measure the overall inside length of your cargo compartment.
Whatever measurement you get is the maximum length of the rail kit that you will need. So for example, for this 60 inch long rail kit, your cargo compartment shouldn't measure longer than 60 inches. Depending on your RV or camper setup, you might need to go with a rail kit that is slightly smaller than your cargo compartment just to account for any potential clearance issues. The trim kit that I mentioned at the beginning of our time together, that trim kit that you need to complete your SuperSlide II is sold separately. To determine which trim kit you need, measure the width of your cargo compartment opening and then subtract four inches. For example, if your cargo compartment measure is 55 inches wide then you would need a 51 inch trim kit. This is going to ensure that the tray would have the proper clearance as it slides in and out. For more detailed information, make sure to take a look at this product page and this product page will give you more information about which trim kit you'll need and how to determine that based on your measurements. Now, as I mentioned, instructions are included. And that's going to conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.
Average Customer Rating: 5.0 out of 5 stars (5 Customer Reviews)
Build an RV sliding cargo tray with this rail kit, a tray trim kit (sold separately), and plywood bottom (not included) to easily retrieve gear from your compartment. Included rails slide tray out so you don't have to crawl into your compartment.Very sturdy, just what we were looking for to add a pull out box to a survey truck. Box screws on and the rails bolt to the bed of the truck.
Just received the product. It appears to be robust and good quality. I have not installed it in my RV yet.
These rails are exactly what I need for my specialized application - a coffin slide mechanism for a crypt-themed escape room. They arrived on time and in good condition. They are bulletproof and appear to be well made. My application will need a slide that can function again and again many times a day for years to come. These slide rails look to be a great place to start. I got great service from order to receipt of product... I would definitely order from this vendor again!
Very good product and a great company to work with even if you have issues with a product they try to make it right
Do you have a question about this RV Cargo Slide?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.