Harness Upgrade for Jensen CD Player to Touchscreen Multimedia System

Video Transcript for Review of ASA Electronics - RV Stereos - 31100216

Today we're gonna take a look at the harness upgrade for Jensen's CD player to touchscreen multimedia system. Now this is going to allow you to use the connections from your old Jensen CD player for your new Jensen touchscreen multimedia system.The really important connection here is going to be this harness. This is going to take those old connections that you already had wired into your vehicle and that would have plugged into the back of your CD player and instead it's going to adapt those connections for our new multimedia system. So this is what's going to plug into our new system and that's from the old.So you don't have to rewire all the connections that you already made. You don't have to undo anything. You can just plug this one in and then make two new connections for our wiring system there.We'll also get two other harnesses.

These are pretty much just gonna be like replacement parts, since our new Jensen touchscreen multimedia system actually comes with these two pieces already. So if you need a new A/V connection or you have a connection that goes into this one, you'll have those parts as well. But the really important part is going to be this piece.Going from the middle, or where those two connections are gonna be made as far as the length that this is gonna add into your system, it's gonna be about six inches. And again this is going to switch from the Jensen CD player which is part number JRV212T, to the Jensen touchscreen multimedia system which is JRV900R.And that's gonna do it for our look at the harness upgrade for the Jensen CD player to touchscreen multimedia system.