Replacement Circuit Board Adapter Plug for Dometic Atwood Water Heaters - 10 Pin to 4 Pin

Video Transcript for Review of Dometic 10 Pin to 4 Pin Circuit Board Adapter Plug - DMC47FR

Hi there, I'm Michael with etrailer.com. Today, we're gonna take a quick look at this Dometic 10-Pin to 4-Pin Circuit Board Adapter Plug. This is going to work for your Dometic Atwood water heaters. So a while back, they started switching from their older style 4-pin circuit boards to a 10-pin circuit board. So if your older style circuit board goes out, you'll probably have to replace it with that 10-pin circuit board, but then you're left with your 4-pin wire plug not working, so that's what this adapter is for. It's going to allow you to connect that new 10-pin circuit board to your 4-pin wire plug.

This is gonna work for your older Atwood Dometic water heaters with that 4-pin connector. So if you are needing to replace that circuit board, if you've already replaced the circuit board and you've run into that issue where the 4-pin wire plug is not working or not plugging into your circuit board, that's what this is gonna be for. Because this is a component from Dometic, you can trust it is going to work with your Dometic Atwood water heaters, so you don't have to worry about fit issues or compatibility problems. So if you are needing to replace that circuit board, this is gonna be what you need. That's gonna complete our look for today.

Again, I'm Michael with etrailer.com. Thanks for watching..