Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs
(2430 reviews)
Price: $218.20
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs
Item # K23-479-00
Our Price: $218.20
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near meIn-stock alternatives that can ship today
- All Info
- Reviews (2430)
- Q & A (0)
- Photos
Dexter Accessories and Parts - K23-479-00
- Trailer Brakes
- Electric Drum Brakes
- Brake Assembly
- 10 x 2-1/4 Inch Drum
- Dexter
- RH
- 4400 lbs
- Self Adjust
Passenger's-side electric trailer brake assembly measures 10" x 2-1/4" and fits 4,400-lb axles. Mounting flange has 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 13" to 15" wheels.
Features:
- Electric brakes are easier to install and offer more user control than hydraulic brakes
- Requires only an electric brake controller (sold separately) - no actuator or hydraulic lines necessary
- Nev-R-Adjust brakes automatically adjust to deliver optimum performance and braking power
- No need for manual brake adjustments
- Proper adjustment leads to better brake efficiency and less wear on your tow vehicle's brakes
- Adjuster plugs (included) cover access holes to keep dirt and grime out of the assemblies and off of the shoes
- Mounting bolts and hardware included
- Made in the USA
Specs:
- Application: most standard hub-and-drum assemblies, including Dexter
- Does not work with Lippert 4,400-lb axles due to clearance issues with the brake mounting flange
- Configuration: right hand (passenger's side)
- Dimensions: 10" diameter x 2-1/4" wide
- Mounting flange bolt pattern: 4 bolt
- Measurement from center of top mounting stud to center of top mounting stud: 2-7/8"
- Measurement from center of bottom mounting stud to center of bottom mounting stud: 3-1/4"
- Measurement from center of top mounting studs to center of bottom mounting studs: 3"
- Wheel size: 13", 14", and 15"
- Axle rating: 4,400 lbs
- Limited 5-year warranty
K23-479-00 10" Dexter Axle Nev-R-Adjust Electric Brake Assembly - 4.4K - RH
Replaces 182770
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Did not fit
- Defective
Customer Reviews
Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs - K23-479-00
Average Customer Rating: 4.8 out of 5 stars (2430 Customer Reviews)
Passenger's-side electric trailer brake assembly measures 10" x 2-1/4" and fits 4,400-lb axles. Mounting flange has 4-bolt pattern. Nev-R-Adjust brakes require little maintenance. Fits 13" to 15" wheels.by: Timothy 04/19/2024
Received said parts on time. ordering and shipping process was easy, straight forward and much appreciated. Have not installed or looked at parts at this time but expecting all to go well.
by: Sean08/01/2022
I am happy to say that my Dexter Nev-R-Adjust Electric Trailer Brake Assembly is working great. I especially appreciate how easy the installation was. My originals got really fried and left me with no trailer brakes going over the mountains.
by: Robert 10/25/2020
Replaced bearing, seals, drums and breaks. Everything fit after we changed the breaks that I had originally ordered. Again that’s to all that worked with me to exchange brakes for the correct ones. Looking forward to going to Florida for the winter now.
by: Marcus 07/26/2020
Great price and quick delivery. The local RV service center did not carry the Dexter electric brake assembly and could not fix my trailer brake quickly enough because they were booked for a month. I was able to replace the brake myself with the unit I got from etrailer. It was easy to install since it comes preassembled and ready to mount. There are a number of online videos available showing how to connect the wires and the proper way to mount the brakes.
by: Tom Y06/01/2019
The dexter Nev -r-adjust electric trailer brake assembly had to be replaced after 3ooo miles ..a piece of junk.
by: Dean05/27/2018
Genuine Dexter parts at very reasonable prices with free shipping at certain $$$ levels. Excellent part discriptions with accurate & precise pictures. Quick shipping, excellent refund policy just be sure to keep original packaging until sure about part being correct. etrailer is my 1st choice for parts for my trailers or towing accessories.
by: Joe05/24/2016
I have never had any complaints about the parts or assistance received from E-trailer. I'll be back for more "stuff" as needed. Thanks for filling my needs in such a professional manner. I hope this will get everyone a well deserved raise.
by: Handydc12/19/2016
Received product today and it was packed in a very protective, sturdy container. There was excellent communication with Etrailer during the procurement process. I won't be unpacking the items for a bit but I'm very confident everything will be OK. You know, that gut feeling kind of thing. Thank you Etrailer.
by: Lawrence04/11/2022
The assembly arrived undamaged and with all the required installation hardware. It was a simple install. The only improvement opportunity is with the enclosed instructions, they did not provide direction on the initial adjustment of the brake shoes, but only referred to Dexter's website for such instruction.
by: George 05/12/2021
I needed a brake assembly for customer that was going camping this weekend. I called Jesse and had him run the order thru and we were able to get the item next day. our customer is very thankful and so am I. Great job Jesse. you rock!!!
by: John h10/03/2019
I’m very happy with the service from etrailer
Parts got here on time and were correct
by: Cameron07/04/2017
Excellent service and quick shipping - using entire assemblies made the job easier and quicker than replacing parts!
by: Steve 12/28/2021
I ordered a brake assembly for my customer on 12/22 and part was received on 12/27. I was impressed with the timely delivery following a holiday weekend.
by: Frank07/03/2018
Quick shipping and excellent customer support. Brake assembly arrived in good shape as advertised.
by: Don Fairfield06/25/2017
best service i have ever got on the internet, even better than amazon.
by: Big Rig Mobile Services02/28/2022
Called for parts Friday around 6 pm and talked to Gwen, she was extremely helpful getting brakes ordered. Very happy with the service and will be using for parts again.
by: South11/02/2022
We ordered these parts after 3 pm and we still received our order the very next morning. Great Job!! Our customer was in a bind, and thanks to you we have a happy customer.
by: Rodney 08/29/2022
Parts were on time as promised and parts were as advertised
by: Mike 08/17/2020
your service was great the part arrived very quickly and worked perfectly thank you for the prompness on my order
by: Vince F09/09/2016
Received in great condition. Installed with no problem.
by: Mark 11/13/2021
Just what I needed and in stock
by: Paul 10/29/2021
Fits perfectly and very easy to install
by: Ron 07/26/2021
Same review as item 1
by: Ryan09/23/2023
by: Robert11/02/2022
25
2274
Show More Reviews
See what our Experts say about this Dexter Accessories and Parts
- Replacement Trailer Brake Magnet for Dexter Electric Brake AssembliesYes, it will! The Replacement Trailer Brake Magnet for Dexter Electric Brake Assemblies item # BP01-225 works with 4,400 lbs Dexter Nev-R-Adjust Electric Trailer Brake Assemblies like item # K23-478-00 or item # K23-479-00.
view full answer... - Recommended 10-Inch Trailer Brakes With Parking BrakeWe do have electric brakes that come with the parking brake that will work for you. I recommend part # K23-086-00 for the left hand(driver side). For the passenger side you can use part # K23-087-00. The brake assembly you asked about will not work with a parking brake as you mentioned.
view full answer... - Nev-R-Adjust Dexter 10 by 2-1/4 inch 4.4k Brake Assembly RecommendationsWe have exactly what you need. The part # K23-478-00 is a left hand Dexter 4.4k Nev-R-Adjust brake assembly that is 10 by 2-1/4 inches. For the right hand side you would need the part # K23-479-00.
view full answer... - Replacement Hub Assembly And Drum Brake For My Dexter 8-407 4.4K AxleYou need Trailer Hub and Drum Assembly - 4,400-lb E-Z Lube Axles - 10" Diameter - 6 on 5-1/2, part # 8-407-5UC3-EZ. This is the hub comes with the bearings, races, and seals. The drum that is compatible is the Dexter Electric Brake Assembly for 4.4K Axles Manufactured After May 2009 - 10" - Right Hand, part # K23-463-00. This hub is also compatible with the Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs, part # K23-479-00. This drum brake self adjusts...
view full answer... - Will Brake Assembly Set # K23-479-00 Fit 2014 Cougar XLite 29RBKThe dimensions listed for the bolt pattern of the # K23-479-00 are close enough to what you have to indicate that they would fit properly on your axle. There's basically only one bolt pattern for assemblies and based on what you listed you have the correct bolt pattern.
view full answer... - What is the Difference Between All the 10 x 2-1/4 Inch BrakesWhen it comes to 10 x 2-1/4 inch brake assemblies there are a few things you need to consider before purchasing. The first you will need to know is if you have electric or hydraulic brakes on your trailer. There is also a difference in the weight capacity of the axles the will fit. There are 3,500 lbs and 4,400 lbs axles ratings. However, the 3,500 lbs and electric brakes are the most common size. After these two factors are determined, then the rest is a personal preferences.The etrailer/Axle...
view full answer...
- Replacement 4,400 lb Hub Drum for Trailer AxleWe do have a replacement hub/drum for a 4,400 lb axle with the part # 8-407-5UC3-EZ which works with the brake assemblies part # K23-478-00 for the left hand side and part # K23-479-00 for the right hand side.
view full answer... - Can Self-Adjusting Brake Shoes Be Used On Manual-Adjusting Dexter Brake Assembly?I do not recommend using the self adjusting brake pads for your manual adjust brake assembly as they are not designed to be used together. If you want the self adjusting setup then you will want to go with Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Left Hand - 4,400 lbs # K23-478-00 and Dexter Nev-R-Adjust Electric Trailer Brake Assembly - 10" - Right Hand - 4,400 lbs # K23-479-00. If you want to keep you current Dexter Electric Brake Assembly 10" - Right Hand # K23-463-00...
view full answer... - Parts Needed to Replace Hydraulic Drum Trailer Brakes with Electric Drum Trailer BrakesThe 10x2-3/4 measurement on brakes is in reference to what drums they fit, not the mounting pattern. The 2-3/4 inch measurement you are getting is indicative of 10x2-1/4 inch brakes like # K23-478-00 that you have referenced. To measure for the size brake assembly you need you will measure the inner diameter of the drum and the width (both where the shoes/linings make contact with the drum). The matching right hand side brake assembly is # K23-479-00. But if you have 3,500 pound axles...
view full answer... - Is There a Difference Between Brake Assembly Kit and Individual Brake Assemblies for 4,400 lb AxleThere is no difference between buying the brake assemblies individually or as a kit with the Dexter Nev-R-Adjust Electric Trailer Brake Kit - Left and Right Hand Assemblies # K23-478-479. Prices have to do with things like demand, and some people only need individual assemblies, so the prices can be different because technically they are different part numbers. But to get to the heart of your question, you can absolutely order the brakes individually and there is no difference. - Dexter...
view full answer... - Dexter Self-Adjusting Electric Brakes for a Dexter 4400 Pound Trailer AxleI have included a picture that shows the mounting pattern for Dexter brake assembly # K23-478-00 so you can compare it to your existing brakes. From what I could find these are the correct brakes for your trailer. The matching right side is # K23-479-00.
view full answer...
- Do I Have to Replace My Dexter Brakes With Dexter BrakesIf you really liked the Dexter brakes and want to continue to use that brand I can help you find exactly what you are looking for. Otherwise, no, you do not have to replace the electric brakes on your trailer with the same Dexter brand. The Nev-R-Adjust Electric Brake Assemblies, part # K23-478-00 LH (driver side) and part # K23-479-00 RH (passenger side), from Dexter that you referenced are great options since you do not have to keep adjusting the brakes. These assemblies are 10 inches...
view full answer... - Brake Assembly Recommendation for a 2004 Keystone Cougar 285 Camper TrailerI did some research on your 2004 Keystone Cougar and it looks like it's a tandem axle trailer with a dry weight of 7,340 lbs. Keystone almost always uses Dexter axles so the correct brake assemblies should be 4,400 lb rated 10 x 2-1/4 inch brake assemblies like the part # K23-478-00 for the left hand side and part # K23-479-00 for the right hand side. Or if you measure the diameter of your assemblies and they are 12 inches you would instead need the part # 23-459 for the right hand side...
view full answer... - What Parts Are Needed to Replace Hub/Drums and Brake Assemblies 4,400 lb Trailer AxleHey Rob, sorry to hear about the problems you had with your current hub/drums. The good news is you did order everything you would need and no additional parts would be necessary. The two pieces you pointed out with your yellow arrows do need to come off as they are parts of the old bearings that were destroyed.
view full answer... - Does the Dexter Nev-R-Adjust Electric Trailer Brake Assembly Kit for 4,400 Lb Axles Come with HubsThe Dexter Nev-R-Adjust Electric Trailer Brake Assembly Kit part # K23-478-479 or part # K23-478-00 for left and part # K23-479-00 for right does not come with a hub/drum. If this is needed you can use the Dexter Trailer Hub and Drum Assembly part # 84546UC3-EZ as most 4,400 b axles use 3,500 lb hubs/drums.
view full answer... - New Brake Assemblies for Komfort Travel Trailer 23T24If you do have 10 inch brakes, I recommend the etrailer.com 10 Inch Self Adjusting Electric Brake Assembly # AKEBRK-35R-SA, # AKEBRK-35L-SA. The mounting flange has a 4 bolt pattern. These brakes automatically adjust as the brake pads wear so you do not have to manually adjust the brakes. I have attached a review video of these brakes for you. We also offer manual adjust brakes, such as etrailer.com 10 Inch Electric Trailer Brake Assembly # AKEBRK-35R and # AKEBRK-35L. These assemblies...
view full answer... - Replacement Brake Assembly Recommendation for Dexter 23-479The assembly you have is our part # K23-479-00. For shoes you'd want the part # K71-699-00. We don't have the magnets for those hubs though. But if the assembly is bad enough to need shoes and magnets you are better off just replacing the whole thing. The price is about the same and you'll end up with new everything and the install will be much easier.
view full answer... - Can Electric Trailer Brakes for a 4,400 Pound Axle be Used in Place of Brakes for a 3,500 Pound AxleElectric trailer brake assemblies for both 3,500 pound and 4,400 pound axles are 10 x 2-1/4 inches and both have the 4 hole square mounting pattern. So you can use 4,400 pound axles brakes. For the left use # K23-478-00 and for the right use # K23-479-00. These are Nev-R-Adjust assemblies which means after you adjust them the first time you will not have to manually adjust them again.
view full answer... - Replacement Brakes, Bearings & Seals for AL-KO 4400-lb Axles on 5-Year-Old Tandem Axle RVThe # K23-478-00 and # K23-479-00 Dexter brake assemblies you mentioned are not compatible with your AL-KO T-44 axle. According to my contact at Dexter (AL-KO was acquired by them), the replacement brake assemblies for your AL-KO axle are now obsolete as they have been discontinued. The only option is to replace the axles on your RV. Since we don't carry any 4,400 lb axles, the closest rated axle we have (that would also match the 6 on 5-1/2 wheel bolt pattern found on the T-44 hubs)...
view full answer... - Brake Assembly Recommendation for a Dexter 4,400 lb Axle with 10 inch AssembliesBy the time you add up the cost to replace the magnets and shoes on your trailer you are at the cost (or more) for all new assemblies plus you end up saving yourself the trouble of messing with trying to install all the components. For an exact replacement for the assemblies of your trailer you would want the part # K23-478-00 for the left hand side and part # K23-479-00 for the right hand side. Replacement parts for these assemblies are even harder to find than normal assemblies due...
view full answer... - Recommended Trailer Brakes for 2006 Bigfoot 21 FT Travel TrailerFrom the research that I have done it looks like a 21 ft Bigfoot is going to weigh about 4000 lbs so I am going to assume that it has 4400 lb axles. Since there is a very good chance that it has the 10 inch x 2-1/4 inch brake assemblies, you could use the Dexter Nev-R-Adjust Electric Brake Assemblies, # K23-478-00 for left hand and # K23-479-00 for right hand. Unfortunately a collective OEM trailer parts catalog does not exist, so the best way to determine what parts you will need is...
view full answer... - Brake Assembly Replacement Recommendation for K71-125-00For an exact replacement for the assemblies of your trailer you would want the part # K23-478-00 for the left hand side and part # K23-479-00 for the right hand side. Brake assemblies are not what you'll use to make your braking more aggresive. For that you'd want to increase the gain setting of your brake controller as that's how you adjust the braking power higher.
view full answer... - Can the Dexter 4.4K Nev-R-Adjust Electric Trailer Brakes Be Purchased IndividuallyYes, the Dexter 4.4K Nev-R-Adjust Electric Trailer Brake Kit part # K23-478-479 can be broken down into the right side part # K23-479-00 and left side part # K23-478-00.
view full answer... - Torque Specs of Mounting Flange Bolts on Dexter Nev-R-Adjust Electric Trailer BrakesI spoke with a representative of Dexter who told me that the 4 mounting flange bolts on the Dexter Nev-R-Adjust Electric Trailer Brake Assembly # K23-478-00 (left hand) and # K23-479-00 (right hand) who was unable to confirm the specific torque specs of these assemblies. However, based on similar assemblies from Dexter we do know that in the past the recommended torque is between 45-70 foot lbs.
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Installed by:
Jeff D
Expert Research:
Jameson C
Expert Research:
Jeffrey L
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Matthew E
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Robert
10/26/2021
Everything is working great. Just finished re- lubricating the axel bearings and we have went close to 10,000 miles now on the brakes and bearings. I only have 1 axle so I can’t afford a brake down. But you never know what will happen.