DeeMaxx Cross Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares

Video Transcript for Review of DeeMaxx Trailer Brakes - Brass Cross Fitting - DE34SR

Hello everybody, this is Jeff at etrailer.com. Today we take a look at this DeeMaxx Brass Cross Fitting with 4 3/16" female inverted flare ports for our one 1/8" diameter brake hose. Now this is an X shaped cross fitting which will connect four 1/8" diameter hydraulic brake lines. Usually a main brake line with three other hoses. The ports we had mentioned are 3/16" size female inverted flares, and they use a thread size of 3/8" by 24. And just to show you, I happen to pull one of the flexible brake lines.

You can see with the fitting on the end, and you can see it has the flare on it that would fit in there. And then when you put your fitting up there and tighten it down, it'll make your connection for you. Now this fitting is a corrosion resistant brass construction, has very thick walls to provide great durability. And if you notice right up here, they offer a pre-drilled hole on it that makes it easy to secure the fitting to your trailer frame. But that should do it for the review on the DeeMaxx Brass Cross Fitting with the 4 3/16" female inverted flare ports for a one 1/8" diameter brake hose.

.