DeeMaxx 90-Degree Fitting for Hydraulic Brake Hose - Brass - 3/16" Female Inverted Flares

Video Transcript for Review of DeeMaxx Trailer Brakes - 90 Degree Brass Fitting - DE94SR

Hello everybody, this is Jeff at etrailer.com. Today we're gonna take a look at the DeeMaxx Brass 90 degree fitting with the two 3/16 inch female inverted flare ports for our 1/8 inch diameter brake hose. Now, this is a 90-degree fitting, which will connect two 1/8 inch diameter hydraulic brake lines at a 90 degree angle. The port sizes are 3/16 of an inch size female inverted flares, and the thread size is 3/8 inch by 24. And just to show you what we're talking about, I happened to pull a flexible rubber hose that has the fitting on the end, and basically can see the flare would fit in there. Slide your fitting up there.

And then just go ahead and tighten it down. You can see that'll make your connection. Again, it gives you a 90 degree connection. Now, this fitting is made of a corrosion-resistant brass construction. It does use thick walls to provide great durability, and you can see right up here has a pre-drilled hole in it.

Makes it easy to secure the fitting to your trailer frame. But that should do it for the review on the DeeMaxx Brass 90-degree fitting with the two 3/16 inch female inverted flare ports for the 1/8 inch diameter brake hose.