Steel Fasteners for License Plates and License Plate Frames - Standard - Qty 4

See what our Experts say about this Cruiser Accessories and Parts

• How Does License Plate Install Hardware part # CR80230 Install on Bracket
  On the license plate bracket of your vehicle there will be square holes that the # CR80230 will pop into (see picture). The portion that pops into the bracket is the four triangular pieces. Once it's installed it becomes a backing plate essentially for the hardware to screw into once passed through a license plate.
  view full answer...
  
• Dimensions of License Plate Screws and Hardware Kit
  The Steel Fasteners for License Plates and License Plate Frames - Standard - Qty 4 # CR80230 are 1/4 inch diameter by 3/4 inch long. This is the standard diameter for license plate hardware, so if you have a smaller hole, you may want to consider enlarging it for compatibility or using stainless or zinc plated screws from a hardware store that will fit the current holes.
  view full answer...
  
• Hole Size Needed for Cruiser CR80230 License Plate Mounting Hardware
  The Cruiser # CR80230 license plate mounting kit uses 1/4 inch diameter screws. If the holes the dealer drilled are smaller than that, I'd recommend enlarging them using a 5/16 inch bit. The plastic nuts (for the lack of a better term) are designed to clip into a license plate holder. Since you don't have a holder, you'll need to figure out a way to secure the nuts to the inside of the bumper to provide threads for the 1/4 inch screws. I'd recommend using super glue to hold the nuts into...
  view full answer...

Do you have a question about this Accessories and Part?