Recommended Weight Distribution Hitch That Measures 11.5 Center of Ball Hole To Center of Hitch Pin
Question:
Hi Am looking for weight distribution hitch with locking pin hole to ball center length not more than 11.5 As thats what mercedes recommend for my vehicle its a 2012 gl350 Can i know if there is one that meets those requirements ? Thanks
asked by: AG
Expert Reply:
The best option we have is the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW - Without Shank # FA94-00-1033 which measures 5" from the center of the ball hole to the center of the shank mounting holes, and then using the Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches # AMAC1 which measures 6-3/4" from the center of the hitch pin hole to the center of the shank holes.
This option will give you right at 11-3/4" and which is the closest option to the 11.5" you mentioned.
Keep in mind you will need to verify the total tongue weight of your setup to make sure this system is rated properly for you. Total tongue weight is the tongue weight of your fully loaded and ready to tow trailer plus the weight of any cargo behind the rear axle of your 2012 Mercedes-Benz GL350. The easiest way to get an accurate tongue weight measurement is with a tongue weight scale like the # e99044 but there are other ways which are outlined in the included help article.
The # FA94-00-1033 works with total tongue weights ranging from 600-1000lbs so if this matches your total tongue weight this would be a great option for you. You will also need 2" hitch ball # A-90 or 2-5/16" hitch ball # 19286 to match the coupler on your trailer.
I included videos of the products mentioned for you to take a look at.
Products Referenced in This Question
2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2-5/16 Inch Diameter Ball
- 2-3/4 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 12000 lbs GTW
- Class IV
- Class V
- Draw-Tite
more information >
2" Hitch Ball - 1-1/4" Diameter x 2-5/8" Long Shank - Chrome - 10,000
- Trailer Hitch Ball
- Trailer Hitch Ball
- Standard Ball
- Chrome-Plated Steel
- 2 Inch Diameter Ball
- 2-5/8 Inch Shank Length
- 1-1/4 Inch Diameter Shank
- 10000 lbs GTW
- Class IV
- Class V
- CURT
more information >
Convert-A-Ball Cushioned Weight Distribution Shank for 2" Hitches - 10,000 lbs
- Accessories and Parts
- Weight Distribution Hitch
- Shanks
- Fits 2 Inch Hitch
- Round - 3 Inch Drop
- Trunnion - 2 Inch Drop
- Round - 6 Inch Rise
- Trunnion - 7 Inch Rise
- Convert-A-Ball
more information >
etrailer Tongue Weight Scale for Campers and Utility Trailers - 2,000-lb Capacity
- Tongue Weight Scale
- Analog Scale
- 2000 lbs
- etrailer
more information >
Product Page this Question was Asked From
Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW - Without Shank
- Weight Distribution Hitch
- WD With Sway Control
- Some Sway
- Shank Not Included
- Electric Brake Compatible
- Surge Brake Compatible
- Fits 2 Inch Hitch
- Allows Backing Up
- 700 lbs
- 800 lbs
- 900 lbs
- Fastway
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: 5 Things to Know About Weight Distribution Hitches
- Video: Convert-A-Ball Weight Distribution AMAC1 Review
- Q&A: Can Weight Distribution Shank for Gen-Y Hitch Ball Mounts Be Used with Standard WD Systems
- Q&A: Solution to Use Gen-Y Torsion Weight Distribution Shank with Equalizer WD System on 2017 Ford F-250
- Q&A: Does Gen-Y Have a Weight Distribution Shank Available?
- Q&A: Weight Capacity of the Convert-A-Ball Adapter Part Number BA-1
- Shop: Equal-i-zer Weight Distribution w/ 4-Point Sway Control - No Shank - 4,000 lbs GTW, 400 lbs TW
- Shop: Reese Steadi-Flex Weight Distribution System w/ Sway Control - Trunnion - 6K GTW, 600 TW
- Shop: Equal-i-zer Weight Distribution Shank - 12" Long - 10" Rise, 6" Drop - 400 lbs TW
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Round - 10,000 lbs GTW - Without Shank
- Shop: Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 8,000 lbs GTW, 800 lbs TW
- Shop: Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW
- Shop: Replacement Shank for Gen-Y Adjustable Ball Mount - 2" Hitch - 7-1/2" Drop/Rise - 10K
- Q&A: Weight Distribution Shank with More Drop to Fit a 2-1/2 Inch Trailer Hitch Receiver
- Search Results: hitch ball mount
- Search Results: hitch riser
- Q&A: Can Hitch or Ball Mount Be Drilled for Additional Hitch Pin Hole
- Video: Equal-i-zer Weight Distribution EQ90-02-4100 Review
- Video: Curt 2 Inch Hitch Ball Review C40034
- Shop: Trailer Hitch
- Article: How to Measure for Trailer Hitch Drop
- Search Results: 44649
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Video: Choosing the Right Brake Controller
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 25580
- Shop: Trailer Wiring
- Video: B&W Continuum Weight Distribution System Review
- Shop: Brake Controller