Could Curt Above Bed Rails Work with Pullrite Hitch

Question

Question:

I have a 2017 Ford F-250 Under the bed brackets are installed but the bed rails won’t work with a 25k superglide hitch. Will these work with that hitch?

asked by: Jay C

1

Helpful Expert Reply:

It depends on which version of the Superglide fifth wheel hitch you have. If it's an ISR version that means it works with industry standard rails like the part # C16104 that you referenced. If its the version that only attaches to the Pullrite rails we wouldn't be able to help.

expert reply by: Jameson C

1

Answer 1

If the Pullrite Superglide is an ISR style fifth wheel hitch which is designed for the rails that the Curt kit part #C16411-204 provides this will work. But there are two types of rails Pullrite designs their hitches for with one of them being for…

view full answer...

Answer 2

A sprayed-in bed liner on your 2017 Ford F-150's aluminum bed will serve the same isolating function as the galvanic isolator strips supplied with Reese 5th wheel rail kits like #RP56034-53 so you will not need to use them above the bed. But…

view full answer...

Answer 3

The only Pullrite Super Glide fifth wheel hitch that will work with either the Curt #C16427-204 or Reese #RP50054-58 custom base rails is the Pullrite that is the ISR Series (the ISR stands for "industry standard rails"). Though we do not…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is 28.4…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

The 40 amp fuse for your 2006 Chevrolet Silverado tow package is used for the 12 volt battery charge circuit. This fuse is located toward the front of the underhood fuse box closest to the front auxiliary positive post (see photo). There may be a…

view full answer...

Answer 12

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Could Curt Above Bed Rails Work with Pullrite Hitch

Product Page this Question was Asked From

Continue Researching