To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Custom brackets reduce the amount of drilling and time required to install your fifth-wheel trailer hitch. Hardware included. Base rails sold separately.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to review part number C16427. This is the Curt Custom Fifth Wheel Bracket Kit for the Dodge Ram truck. This is a custom fit part number, it is designed to fit the Dodge Ram 2500 without the factory prep package starting in 2014. At any time it is a custom fit part number. What I do like to recommend is to go to our website and put in .. Go to our fit guide and put in your year and model vehicle and it will tell you exactly if this part number will work for your application. This part number includes the brackets, the spacers, and some mounting hardware.
This bracket kit will mount beneath your truck bed, provides attachment points for your fifth wheel rails. The fifth wheel rails are sold separately, it does require the Curt Base Rails either part number C16104 or C16204. Those are listed on this product page as related products. Now these brackets will provide a custom fit by mounting to existing holes in your vehicle's frame and that will minimize the amount of drilling that's required and it will also cut the installation time in half when compared with the universal bracket kits. It does include all the necessary hardware and again, this finish on the brackets are a nice black powder coat finish to help resist corrosion, and again, it comes with the four brackets shown here to the spacers and all the mounting hardware that's needed to install in your vehicle. That should do it for the review on part number C16427, the Curt Custom Fifth Wheel Bracket kit for the Dodge Ram truck. .
Average Customer Rating: 4.7 out of 5 stars (35 Customer Reviews)
Custom brackets reduce the amount of drilling and time required to install your fifth-wheel trailer hitch. Hardware included. Base rails sold separately.This bracket kit was exactly what we needed for my husband to install the rails for our 5th wheel trailer hitch. Make sure to read/study the instructions carefully. You will need several 3/8 drive extensions for your socket set to reach the bolts when tightening them.
The hitch is a great product with excellent documentation of installation. Unfortunately, the hardware for the installation of the rails was not included in the shipping. I contacted the company and they sent the hardware with overnight shipping and I received it the next morning. I appreciate the excellent customer service. I was able to install the hitch and pick up my trailer as scheduled.
Replacement bolt sent was the wrong bolt. I am as sent a short 12 mm bolt. I requested the longer bolt. I was frustrated and just ordered the proper bolt from a different vendor
This kit fit my 2014 Ram 2500 4x4 reg cab long bed perfectly.
After watching the installation video the instructions were unnecessary so I can't say how easy they were to follow, however the diagram was definitely handy. Also, you're definitely going to want to clean the threads in the frame prior to installation.
The Curt people make a great quality product, BUT this is the second time I have attempted to install their fifth wheel kits and the instructions are terrible. The diagrams are almost impossible to see clearly and this makes the installation twice as hard. Seems like Curt could spend a five cents more, make a little more effort so their instructions would be more clear.
Bill J.
1/7/2018
Product works perfectly, but the instructions were not clear.
Exactly what I needed to install my fifth wheel hitch.
Etrailer was great. Product got here on time and all there. Fit as promised. Whole kit but for one bolt went in, in about 60 min.'s
Not sure that it is my fault buying a Dodge,or the inability of Reese to build a unit that fits better, but the back rail front bolt on the passenger side is a bear to put in. The suspension is right up against the bottom of the bed, and the bed re-enforcing rail. You bolt the hitch to the bed metal, not great, real thin, using a tube as a spacer between the bottom of the box and the bottom of the frame rail. The directions say feed in from the side and drop the bolt thru. All most impossible to do. I used a piece of tie wire thru the tube to draw it up, and then a 1/2 x 24 drift to force the tube upright inside the framerail. cut off the wire, drop in the bolt (per recommendations from etrailer, a grade 8 4 1/2 x 1/2 bolt, hex head) and have the wife finger tighten the bolt on top. Impact from there all is good and done. That bolt took about another hour.
the 2014 dodge 2500 adapter kit for a fifth wheel hitch was perfect. it went right in. the parts where all there and had instructions to help put in it in. the place I went to have it installed wanted 300 dollars for labor. I put it in in about 3 hours. you have to remove the spare tire and the shield around it for the rear brackets and the driver side front I had to move three wires out of the way. once you have the brackets in place tighten them up. Then you can drill the holes from the bottom with a pilot drill and move inside of the bed and drill the bolt holes from the top side. do not tighten bolts up until you put your hitch into the rails in order to make sure it lines up. I did have a problem with the long bolt on the front side of the right rear bracket, so I put it in from the bottom because it was hard to get the nut on from under the bed. with hitch in place tighten all bolts that hold your rails in place. put spare tire shield back in place and remount your spare tire and you are done. the only thing I can think of that needs improvement is the brackets need to be marked with right front driver side, passenger side front, and so on.
The Curt Custom 5th wheel bracket works well for the 2014 dodge ram 2500. The instructions need to simplified. A photocopy of the installations parts weren't clear , neither were the steps. Must use your own mechanical ability to do the install. All the parts were perfect once you figure it out. Time of install 3 hrs. The product was delivered very fast.
We bought a Curt slider hitch 16516 and base rails with bracket kit. Everything was very well constructed. We were very impressed with the product. We installed everything ourselves after watching the video. We highly recommend watching the video. Everything went together without any problems. Very solid hitch.
Loved how easy it was to install. Saved myself several hundred dollars using this kit and installing it myself
Todd R.
4/8/2021
Awesome no problems at all
Great website. Had no problems ordering what I needed. Will be using etrailer again as a first time Rv owner.
Leroy
7/5/2022
Its been great. Not problems at all!!
This kit fit for the most part, instructions were not very detailed in fact it was mostly diagrams and a few pics. The kit fit up well on the drives side but the passenger side could have been better, it worked but had to get creative with the Hex head through bolt, to make it work. I believe this kit was made for the 2020 model Ram , there is a slight difference with the 2021 .
THIS BRACKETS MADE SO EASY FOR ME TO INSTALL THE HITCH,EVERY THING FIT PRECISE,INSTRUCTIONS WHERE EASY TO FALLOW,GREAT PRODUCT
Product was shipped and recieved in a timely manner. All parts were there. Directions were good. Approximate install time by DIY a bit misleading however I was successful and am pleased with the outcome. There are youtube videos showing install which were helpful. Overall it appears to be a quality product and substantial enough to pull a small house!
Very thing was good and delivered in a timely manner
Gary M.
6/15/2016
Is working great I liked it because I didnt have to buy a the $400 prep kit just bolted it to the frame and drilled bed and put down rails and ready to use .
THANKS FOR THE HELP, PART GOT TO US IN TIME.
On time awesome service
I received the product sooner than expected and in great shape and complete! I will definitely be a repeat customer.
My order fit perfectly and was of great quality. Very friendly staff and super fast shipping
Fits like a glove and very easy to inst all.
Great fit
This product was what i needed i haven't installed it yet
Amazingly easy to install! Great product with a great truck is a no brainer
Do you have a question about this Accessories and Part?
Condition: Missing Parts
Notes: missing metal cylinder bushing and 1 long bolt
Condition: Surface Scratches
Notes: missing a couple peices of hadware and has light surface scratches
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
7/7/2023
I know that we want to send you the correct bolt. I will have our Customer Service team reach out to you.