Bulldog Winch On-Board Air Kit w/ Compressor & 5 Gallon Tank - 200 psi

Video Transcript for Review of Bulldog Winch Vehicle Accessories - Air Suspension Compressor Kit With Tank - BDW76QR

Ellen: Hey, everybody. I'm Ellen here at etrailer.com, and we're going to be taking a quick look at the Bulldog Winch air kit with five-gallon tank and air compressor. So this gives you everything that you need to be able to use any kind of air accessories, whether that's going to be your tires on your vehicle, so if you're going to go rock crawling and you want to deflate your tires a little bit so you can get a better grip going over the terrain and then air them back up, this allows you to do that. It also allows you to fill up any kind of air watercraft, so rafts, floaties, all kinds of fun stuff, kayaks, things like that. And it also allows you to use any kind of air tools as well, so really versatile system that you can use for all kinds of things, whether it's work or play. So a really nice addition to your vehicle.Does come with, again, that five-gallon tank, the compressor, and everything else you see laid out here on the table, so it should be a pretty complete kit as far as making sure that you can use all those other accessories.So we'll have the compressor itself.

This is rated for being underneath a vehicle. It's IP67 rated, so that means that it's pretty much able to be underwater and still function. The IP6 means that it's impervious to dust, and that 7 means that it can stand being submerged in three feet of water for up to 30 minutes. Not that you would necessarily want to do that, but that's what the IP rating means. So really durable compressor here that you can have mounted underneath your vehicle and not have to worry about that.Comes with all the hardware, the fittings.

Will have several different kind of NTP fittings for our tank. There's going to be different bungs here to attach those different fittings so you can really get it customized to fit where you want it, whether you want to mount it like this or on its side or underneath like that.Now this is e-coated to make sure that it's going to resist any kind of rust or corrosion, and it's also a steel tank, so should be really nice and durable. Will also get our coil air hose to run out to your tires or any other accessories that you want to inflate and comes with a lot of different fittings for different accessories. Also comes with all the mounting hardware as well, so it should be a pretty straightforward install. And also has a manual on/off switch and analog pressure gauge so you can check out what's going on with the pressure in the tank, fill everything up, and be able to see what's going on there.As far as the numbers, again, five-gallon tank capacity with a maximum PSI of 200 pounds per square inch.

The inflation ports, we're going to have eight that are 1/4 inch and then two that are 3/8 of an inch NTP. The tank measures 20-5/8 inches long, so it's going from end to end, so 20-5/8 inches. And then 10-5/8 inches tall and 9-3/16 inch wide.It does have those brackets on the back, so if we flip that over, the brackets themselves measure 7 inches by 1-3/8 inches wide. The distance between them from outside to outside, so the footprint that they're going to make, is 13-3/16 of an inch. The distance between the bracket mounting points center to center of those holes is 11-7/8 and then 5 inches.

As far as our compressor, it's about 12-1/2 inches by about 6-3/4 and about 3-1/2 inches, just to give you a rough idea there.But that's pretty much it for our look at the Bulldog Winch onboard air kit with tank and compressor. I hope this has been helpful in deciding if this is the right kit for you. We do have a lot of options available here at etrailer.com for all kinds of accessories to get you out on the road and having fun, so check them out. Thanks for watching.