Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
(672 reviews)
Price: $169.70
In Stock
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
Item # 84546UC3-EZ
Our Price: $169.70
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (672)
- Q & A (0)
- Photos
Dexter Trailer Hubs and Drums - 84546UC3-EZ
- 5 on 4-1/2 Inch
- For 3500 lbs Axles
- Hub with Integrated Drum
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Pre-Greased
- Standard
- 1/2 Inch Stud
- L44649
- L68149
- Dexter
This hub-and-drum assembly fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.
Features:
- Trailer hub-and-drum assembly provides surface area for brake shoes to grip when brake is activated
- Compatible with electric and hydraulic drum brakes
- Pre-greased hub is easy to install - no need to pack bearings
- Sturdy iron construction
- Bearings, races, grease seal, grease cap, wheel bolts, and lug nuts are included
- Hub and drum are made in the USA
Specs:
- Application: 3,500-lb E-Z Lube trailer axles with #84 spindles
- Drum dimensions: 10" diameter x 2-1/4" wide
- Works with 10" brake assembly
- Bolt pattern: 5 on 4-1/2"
- Grease cap flange diameter: 1.986"
- Wheel bolt diameter: 1/2"
- Weight capacity: 1,750 lbs
Bearing, Race, and Seal Information
- Bearings (included)
- Inner bearing: L68149 (1.378" inner diameter)
- Outer bearing: L44649 (1.063" inner diameter)
- Races (included)
- Inner race: L68111
- Outer race: L44610
- Grease seal (included): 10-19
- Inner diameter: 1.719"
- Outer diameter: 2.565"
E-Z Lube-Compatible Assembly for Simple Lubrication
The grease cap on this hub-and-drum assembly is specially designed to work with your Dexter E-Z Lube axle to make lubricating bearings quick and easy. Just remove the plug on the grease cap, attach a grease gun to the zerk fitting on the end of the spindle, and inject the grease. It will flow easily to both inner and outer bearings. Not only does this make lubricating the bearings easy, but it also helps to prevent corrosion of the hub. This is because you can lubricate the bearings without the mess of taking apart the entire assembly.
Determining the Bolt Pattern
The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.
On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)
To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)
Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.
- If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
- If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
- If D = 3", then the bolt pattern is 5 on 5"
- If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"
K08-247-94 Dexter Pre Greased 10" Trailer Hub and Drum Assembly for 3.5K Axle with Hardware - 5 on 4-1/2
Replaces 84546UC3-EZ
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased - 84546UC3-EZ
Average Customer Rating: 4.8 out of 5 stars (672 Customer Reviews)
This hub-and-drum assembly fits 3,500-lb axles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, wheel bolts, and lug nuts included.by: Paul11/08/2023
The brake parts were all correct for my application and installation was straightforward with minimal tools needed. I did take the extra step of soldering the wire connections because that is the best way to do it IMO.
Stephen at etrailer was very helpful. He made sure I had all the right parts for my application. and they were on their way very quickly.
I will say that I tried to use my local dealer first because I like to support local businesses, but unfortunately, they were having trouble finding the right parts for my trailer. When we did find them, they were 50% more expensive for the exact same parts that etrailer supplied. I would also have had to drive 80 miles round trip to get them.
The reason for the 4-star rating is because of shipping/packing. The parts were heavy in large boxes with no packing material to hold them in place. Two of the hub sets were out of their boxes and there was a crushed grease cap. So, better packing to keep things in place in the boxes or use a smaller box would be nice.
I attached a few pics of before and after also tmy very worn hubs. You can see that eh armature is worn down to the studs and the magnets are starting to show the coils. It was time. Also a short video or timelapse that I titled, Trailer Brakes in 18 seconds
by: Mat06/16/2023
I was a bit intimidated by the thought of taking apart my hubs and had no idea where to start. But the etrailer live chat gave me a complete parts list based on my trailer GVWR, I watched a couple of videos on the website, and then spent about 1.5 hours on the job (honestly, at least 45 mins was me figuring out where I wanted to run the wire and strapping it in, then stopping to drink a beer and admire my work, with the actual hub work taking less than 20 mins apiece).
I was able to install the new whip, box, and run power to the hubs in about an hour afterwards. I then got in the truck, toggled to my trailer braking control, set my sensitivity, and went for a test drive. Works flawlessly!
by: Paul K09/23/2017
Bought new Dexter brakes and drums to replace the original brakes on my 1995 Haulmark car trailer. The original drums and magnets were badly worn, and I wanted to replace them before going to the car cruise in Ocean City. I received an email from etrailer.com within hours of placing the order, stating that the order has shipped! The absolute best customer service I ever had. The parts arrived within days, and the packaging was superb. Thank you etrailer!
Paul K.
9/24/2018
The Dexter parts are working great so far! Although I only used the trailer twice for about 450 miles total. Ive always had good service from etrailer. Thank you for the follow up, I appreciate it.
by: Richard04/11/2024
I destroyed a hub/drum when i lost a bearing. I was able to clean up the spindle just enough for it to be salvageable and I put this new hub assembly on. So far, so good!
by: Paul 05/14/2024
Hi Alex,
This is NOT my first order with you guys, there has been a few.
This order arrived on time, in perfect condition, and the replacement went FANTASTIC…….THANK YOU!!!
Every order with etrailer has been absolutely Perfect!
Keep up the Great work and customer service. E-trailer is Great!!!
by: Jonathan08/19/2015
Got this with a 10 inch trailer brake. Everything was as expected. I had to buy a couple nylock nuts from Menards. They are 7/16 by 40 pitch. Which is a fine thread.
Jonathan
8/23/2016
The brakes work great! Im really happy that I took the time to install them.
by: Pete 05/01/2024
Customer service was extremely helpful! Order arrived earlier than expected. All the new parts fit exact. Bolted on and was done in 10 minutes! Have always been pleased with every purchase.
by: Ron02/05/2024
Easy installation, quality parts.
During shipment the box was busted open and one of the 4 hub/drums came out. So the box arrived taped up and 1 hub short to complete the job.
I called the contact number, great customer service. They are currently rushing me the missing hub. Thanks!
by: Rolvin06/10/2020
The brakes from etrailer were of excellent quality. They installed easily, and no adjustments were needed for the installation. After bleading the system, the brakes worked fine. I will definitely recommend etrailer to my friends and relatives needing trailer parts and accessories.
by: Patrick05/10/2023
Customer service was excellent, fast shipping and perfect replacement parts.
by: Thomas 11/08/2023
Worked with Helen at etrailer to make sure the correct parts were ordered and supplied. Helen was a pleasure to work with and the hubs and bearings fit perfectly. A year later everything is still working great.
Thank you Helen and etrailer.
by: Peter07/02/2022
Installed perfectly and performed as expected.
This was a switch out to a new trailer without brakes to adding Hubs & Drums with brakes. Everything worked out as planned and it was a quick change out.
Thanks for your help etrailer
Peter
7/4/2023
Everything is still working as planned. The change out for the installation of trailer brakes is as planned. I specified these parts for the brakes but also so I could add a hand brake lever when the trailer is parked. I didnt want the possibility of it rolling. Additionally, this allowed me to drill a hole through the hand brake lever to lock it against theft. The entire parts and planning worked.
by: Shawn03/05/2024
Parts r good quality fit good would order from trailer again
by: John09/12/2023
Who doesn’t love a 20 minute hub change with bearings and grease?? I sure do and replaced all my hub bearing assemblies with these. It took about an hour and I was back on the road. I drove our TT about 150 miles over the weekend and it did great! Thanks to the staff at ETrailer for going above and beyond with the sale as well!
by: Bob the builder06/08/2022
Reassembly of parts went perfectly, I made the right choice with etrailer !!
by: Wayne07/27/2016
installed brakes on my 97 Rogue boat trailer. E-Trailer had everything I needed for the job. Trailer already had the 4-hole mounting plate for the backing plate. It was all bolt on, brakes work great. I have bought quite a few items from them over the past few years, including an axle assy with brakes for another boat trailer, 2 brake controllers and also a trailer hitch for our older Lexus suv. I am very satisfied with there service and quality of there merchandise.
by: Anthony 08/21/2023
Everything worked out well and are good replacements for existing drums. My only issue was the nuts and washers were too large for my spindle. Luckily my existing nut and washer were in good condition and could be reused.
by: Jack J.06/30/2018
We have been going camping out West snd Southwest for five years now. Pulling 2003 Jayco 12 Sd popup behind 2006 Chevrolet Express 2500. A lot of mountains. Big Mountains. I noticed that the hydraulic brakes on the camper didn't work properly. I have tried to adjust them multiple times but it didn't help. I decided to replace them with electric brakes . It looked like etrailer had exactly what I needed. I ordered the electric brakes assembly first and then hub and drum assembly. Had to take some measures for the brake plate mounting and also get part numbers of the old bearings in the hub. All parts arrived two days after order was placed. Amazing. All the parts were there. . I am not the greatest mechanic but I was able to install them fairly quickly. Installation videos on etrailer website and YouTube were very helpful. We just went on our first camping trip this year. Only two hours drive. It seems that everything works fine I can feel that new brakes actually work. Thanks to Nicole at etrailer for helping me with this order.
by: Scott07/21/2023
The Dexter brakes and hubs are great - a bit pricey but far and above the no-name brands. There was one problem with the order (well 2 actually), they only shipped one brake in the package so there go my plans for installing the new hubs and brakes this weekend. This was an order for left-and-right brakes and two hubs. Mistakes happen so I'm not real upset about it. I'll update this review when I see how customer service handles this.
The second problem is the packaging. Nothing was damaged, which surprises me, but the two Drums and one brake were in their own boxes inside a bigger (huge) box with no peanuts or anything to keep them from flopping around. I lifted the box up on end so I could pick it up to carry it back to my work shed. When I did, it almost rolled out of my hands because the contents shifted so violently. When I got back there and opened the big box, the three smaller boxes were piled atop each other at one end.
FORTUNATLEY, they made it through the carrier's system, of which I am very familiar since I worked there for years. I was shocked they did. Better care when packing into larger boxes would go a long way.
Five stars for the products. Three (average) for the care in shipping the order.
by: John H04/12/2018
I purchased a used cargo trailer. We used it in October to go to Colorado on a hunt. We had a horrible time with the brakes failing. I tore it down this Spring and found there were no brakes on the front axle. I started checking around locally and could not find the parts I needed. I found etrailer online and took a chance and ordered(something Idon’t do shop online)the parts I was sure I needed. The parts arrived Tuesday and I installed them today. Everything was just as advertised and the fit was exact. Now I just need to get two new tires and wheels and the trailer will be ready for our trip to Colorado this year. Thanks E-Trailer.
John
by: Mathew06/19/2022
Really detailed helpful videos made installation a snap. I put brakes on a trailer that didn’t have them.
A word of caution. Unlike the brake kit, the drum kit only does one wheel. So if you order a brake kit and a drum kit you don’t have enough to do two wheels.
by: Dean 12/27/2023
As always, great doing business with E trailer. Great products
by: Robert05/20/2018
Great Price on a new brake drum for my Casita. Included everything - bearings, seals, dust cap, retainer, axle nut and lug nuts. Did not include the washer, but that's no big deal (I have a few extra!). Arrived much faster than expected, too. Got my Casita back on the road after a bearing failure that scored the inside of the hub. Great price and good service from etrailer! I must also mention that etrailer has so much good INFORMATION and tutorials as well. There might be other online sites that have it for a penny cheaper, but they don't have the information you need to get the job done right. Thanks again etrailer!
by: Benoit05/09/2024
Melissa provided excellent service and follow-up on delivery
by: Lisle05/13/2024
Got it on today. No problems
25
672
Show More Reviews
See what our Experts say about this Dexter Trailer Hubs and Drums
- Electric Drum Brakes and Hub/Drums for 2008 MaxSport R Vision MS 19 Tandem Axle Travel TrailerI reviewed the specs for your 2008 MaxSport R Vision MS 19 tandem axle travel trailer. The trailer's GVWR is 5454-lbs, which makes perfect sense based on the 2800-lb rating for each axle that you mentioned. The specs also note that electric drum brakes are installed only on the rear axle. In a case like this those brakes are likely to be rated for more than the single axle 2800-lb rating. Odds are good that the rear axle with brakes uses 4400-lb-rated 10 x 2-1/4-inch brakes like Dexter...
view full answer...
- Replacement Dexter Hub for 2007 Casita Freedom Deluxe Camper Hub K08-247-94You can select a suitable replacement hub for your Casita Freedom Deluxe camper by matching up the existing hub's bolt pattern, axle capacity and bearing set. If your original hub has a 5-on-4-1/2-inch bolt pattern, is fitted to a 3500-lb axle and uses inner bearing 68149 and outer bearing 44649 then the 10 x 2-1/4-inch Dexter part # 84546UC3-EZ is a correct replacement. My contact at Dexter confirmed hub K08-247-94 has these attributes.
view full answer... - How to Verify Hub FIt on Rockwood Ultra Lite TrailerI'm sure we can get you a hub assembly for your 2006 Rockwood Ultra lite 2606, but we just don't have any way of knowing off-hand or cross-referencing what hubs that trailer needs. So in order to find the correct hubs you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle...
view full answer... - Can Timbren Axle-Less Suspension System Work With Off-Road Tires?There is a 2,000 lb capacity Timbren Axle-Less Suspension with 4" Drop Spindle # ASR2KHDS09, though not a 1,200 lb one. I am not certain what you are referring to in terms of "strong enough" but it will work with 3,500 lb rated hub and drum assemblies # 84546UC3-EZ as well as 3,500 lb brakes. If you were referring to your trailer being strong enough, if you do not have a crossmember above where you want to install the Timbren one will need to be added, or you can reinforce your trailer's...
view full answer... - What Type of Nut Retainer is Used on the Dexter Trailer Hub and Drum Assembly for 3,500-lb AxlesThe Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles part # 84546UC3-EZ uses a snap/clip around retainer to keep to nut in place. Check out the linked video that shows the exact process.
view full answer... - Replacement Hub/Drums and Brake Assemblies for RV with Dexter 3,500 lb AxleWe have just what you are looking for, and thank you for all of the details and info on your setup currently as that makes picking out what you need very easy. For brake assemblies you'd want the part # 23-468 for the left hand side and # 23-469 for the right hand side. Then for the correct hub/drum that comes with bearings, seals and a dust cover you'd want the part # 84546UC3-EZ and you'd be set.
view full answer... - Replacement Spindle For Dexter #9 Torsion Axle Rated For 2,500lbs The #84 E-Z Lube Spindle # TRU74FR is the size spindle used on your 2,500lb Dexter torsion axle with serial number 122134619. This spindle has an E-Z lube grease zerk on the end of the spindle like our current spindle. I was able to determine your axle came with the Dexter Brake Kit # 23-26-27 and 2 of the Hub/Drums # 84546UC3-EZ if you want to also replace these parts when replacing your spindle.
view full answer... - Replacement Rubber Plug for EZ-Lube Grease Cap on Tow DollyThe only rubber dust covers we offer for EZ Lube grease caps are # RG04-010, which are designed to fit a 1.18 inch diameter hole in the grease cap to allow access to the grease zerk without removing the cap. Your best bet would be to simply replace your existing grease caps. If the outer bearing is # L44643 or # L44649, use the # RG04-040 grease cap with removable plug. This is compatible with most 2000-3500 lb capacity hubs which is typical of what's found on most tow dollies. To be...
view full answer... - Recommended Brake Assemblies and Drums for Dexter P-11 model SLR SND 490400 AxleI reached out to my contact at Dexter and based on the information you gave, they said is it a spring axle with a 3500 lb capacity. Based on that, I recommend the Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469 which comes with the backing plate and the 4 bolt mounting pattern. For your drum assemblies, I recommend the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ if...
view full answer... - Forest River Rockwood A 192 HW Brake Assembly Replacement for 3,500 lb Axle and 13 inch WheelThe brake assembly set part # 23-468-469 that you referenced will fit behind a hub/drum that can fit with 13 inch hub/drums like the part # 84546UC3-EZ which is correct for your 2016 Forest River Rockwood A192. Not all 3,500 lb hub/drums can fit behind a 13 inch wheel but this Dexter does and the correct fitting brake assemblies is the # 23-468-469 so this kit would work for you.
view full answer... - Difference Between Hubs # 84546UC3 and # 84546UC3-EZThe difference between the two hubs part # 84546UC3 and # 84546UC3-EZ is the grease cap that comes with them. The part # 84546UC3-EZ includes an EZ lube style of grease cap that has a rubber plug that can be removed for easy access to the zerk fitting. And the part # 84546UC3 instead has a cap that does not have the center plug that can be removed.
view full answer... - Compatible 13 Trailer Wheel and Tire For Dexter Trailer Hub and Drum Assembly # 84546UC3-EZYes, the Provider ST175/80R13 Radial Trailer Tire w/ 13" White Wheel # TA43RR will fit the Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ. This hub is designed for 13"-15" trailer wheels.
view full answer... - Options to Upgrade 3,500 lb Axle on TrailerThanks for the photos, and while we do have an option for you, there aren't axles with the dimensions you have, you can still upgrade your trailer with what is called an axle-less system from Timbren. These are simply bolted or welded so you do not have to worry about finding an axle that meets any specific measurements, and give you a better ride compared to a traditional through-axle. The reason for that is the Timbrens aren't connected by an axle beam so they work independently; so...
view full answer...
- Availability of Replacement E-Z Lube Grease Cap and Plug for Trailer HubsIt sounds like you are needing a replacement grease cap and rubber plug for the Dexter hubs on your E-Z Lube axle. In order to find the correct part for your current hubs, you will simply want to take a quick measurement on your existing grease cap or the hub's bore. If you can tell me what model hub you have on the trailer, I should also be able to recommend the correct replacement cap to use. For example, the Replacement EZ Lube Drive-In Grease Cap # 21-41-1 features an outer diameter...
view full answer... - Is There a Replacement Hub for My Mobile Home AxleIn order to determine which hub will fit the spindle, you will either need the bearing numbers from the bearings from that spindle, or you can take some precise measurements on the different steps on the spindle using a dial caliper to get precise measurements. Often times it is not possible to find replacement parts for mobile home axles as they are designed for one time use. In most cases replacement parts are simply not available. However, if you can find the bearing numbers or collect...
view full answer...
- How to Determine the Correct Hub for My MacGregor Sailboat TrailerDetermining the correct wheel bearings, seals or hubs for a trailer is normally done by using the existing inner and outer wheel bearing part numbers and grease seal part number. This is the only way to be sure that the correct parts are ordered. The bearing part numbers will ensure that you get the proper size and weight capacity parts for your application. When replacing the hub you will also need to be sure that you measure the wheel bolt pattern (see link) and, if the axle capacity...
view full answer... - Replacement Trailer Brakes, Hubs and Bearing Kit for 2010 Airstream International 23D Travel TrailerI reached out to Dexter who confirmed that your Dexter axle on your 2010 Airstream came with the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469. As your trailer is 12 years old the brakes may have been changed but the size would be the same. This will use a Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ if your drums are warped or beyond their service life. We do have the Bearing Kit # BK2-100 that will provide new bearings, races, grease seal, tang washer and cotter...
view full answer... - Timbren Axle-Less Trailer Axle with Brake and Hub/Drum Assembly RecommendationsSince you're needing to add electric brakes to your T@B trailer you want to go with the Timbren # ASR2KHDS01 which has the brake mounting flange whereas the Timbren # ASR2000S01 doesn't have provisions for the brakes. Then for brakes you can use the Dexter Axle Set # 23-468-469 and then 2 of the Hub and Drum Assembly # 84546UC3-EZ. Attached are some installation videos for you to check out!
view full answer... - Hydraulic Drum Brakes and Hubs for the 1,200 lb Timbren Axle-Less Trailer Suspension SystemWe actually do have a Timbren Axle-Less Trailer Suspension System rated for 1,200 lbs that comes with a brake flange. It is listed on our site as part # ASR1200S04. With this system you can use the Hydraulic Trailer Brake Kit # AKFBBRK-35 along with the Dexter Trailer Hub and Drum Assembly # 84546UC3-EZ. These are rated for a 3,500 lb axle but will fit on the 1,200 lb axle-less system. If you don't already have brake lines then I also recommend using the Kodiak Hydraulic Brake Line Kit...
view full answer... - Which Dexter Hub or Hub and Drum Fits a Lippert 2,800 to 3,500 Pound Trailer AxleThe LCI35 in the axle number indicates that it is a Lippert 3,500 pound axle but it could be derated to 2,800 pounds. I believe the G545 indicates hubs with a 5 on 4-1/2 bolt pattern. So for hub and drum assemblies that fit those characteristics you can use assembly # 84546UC3 (or # 84546UC3-EZ if the spindles have grease fittings at the ends) which uses inner bearing L68149 and outer bearing L44649. For a regular hub you can use # 84545BX (or # 84545UC1-EZ if the spindles have grease...
view full answer... - What Parts Make Up the Timbren Axle-Less Suspension With Electric Brakes for 3,500 lb?The Timbren Axle-Less Trailer Suspension System w Electric Brake Hubs - Straight Spindle - 3,500 lbs # A35RS545E is a combination of parts. It is the Timbren # ASR3500S05 along with the Dexter Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles - 10" Diameter - 5 on 4-1/2 # 84546UC3-EZ and Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,500 lbs # 23-26-27.
view full answer... - How To Add Brakes to a Aluma 6812H Utility TrailerIn order to add brakes to your Aluma 6812H Utility Trailer you'll need a few items which I have attached a list of for you below. Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469 Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles part # 84546UC3-EZ Junction Box # 3375601101 7-Way Connector # H20046 Hopkins Engager Push-To-Test Trailer Breakaway Kit part # 20099
view full answer... - Replacement Dexter Hubs, Drums and Brakes on 2017 Jayco Camper With 3,500 lbs AxleBased on the information you provided, we do have the Dexter components you are looking for; your axle has a 3,500 lb capacity and uses 10" self-adjusting electric brakes. The Dexter hub and drum assembly you need, which comes with the bearings, races, and grease seal is # 84546UC3-EZ. For Dexter self-adjusting electric brakes, you'll need # 23-468-469, which comes with the left and right hand assemblies. I've included a link to a video review of the hub and drum assembly for you to...
view full answer...
- Can The UFP Hub/Drums HD-1377-10 Be Resurfaced Or Will They Need Replaced? Based on images I could find it would appear the maximum internal diameter is 10.09. This information should be stamped on the drum itself. If you do not have any dimensions stamped on your drum they should not be turned and will just need to be replaced with the Dexter Trailer Hub and Drum Assembly # 84546UC3 that you already found. We also have this hub/drum as an EZ Lube # 84546UC3-EZ if you have the grease zerk on the end of your spindles.
view full answer...
Do you have a question about this Trailer Hubs and Drum?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Video Edited:
Zack K
Installed by:
Rick A
Installed by:
Andy C
Updated by:
Adele M
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Hannah L
Updated by:
Mike S
Updated by:
Carrie F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Katrina D.
11/11/2023
I am sorry that the hubs arrived in this condition. Let me get you over to our customer service department for them to see what we can do for you.