Electric Drum Brakes and Hub/Drums for 2008 MaxSport R Vision MS 19 Tandem Axle Travel Trailer
Question:
Need help with the correct part#s for brake kits and drums on my 08 MaxSport R Vision MS 19 dual axle. Axles say Trail-Lite AXL0065, Lippert NV# 13207, GAWR 2800 lb. Thanks.
asked by: Wayne A
Expert Reply:
I reviewed the specs for your 2008 MaxSport R Vision MS 19 tandem axle travel trailer. The trailer's GVWR is 5454-lbs, which makes perfect sense based on the 2800-lb rating for each axle that you mentioned. The specs also note that electric drum brakes are installed only on the rear axle.
In a case like this those brakes are likely to be rated for more than the single axle 2800-lb rating. Odds are good that the rear axle with brakes uses 4400-lb-rated 10 x 2-1/4-inch brakes like Dexter # K23-462-463-00 or this same size brake in a 3500-lb rating, such as # AKEBRK-35-SA. If you pull one of the hubs you can measure it (see photo please) to confirm the size brake you need and also the size hub/drum you need. The linked page displays all electric brakes in the 10 x 2-1/4 size.
For new hub/drums you need to confirm the bearings used in the originals since the new ones have to use the same bearings in order to fit on your spindles. The pair of new hubs also has to be rated for at least the same weight as the axle. They also need to match your wheel bolt pattern, most likely 5-on-4-1/2. For instance, hub/drum # 84546UC3-EZ is rated for 3500-lb axles, has the 5-on-4-1/2 bolt pattern and uses bearings # L68149 and # L44649.
Products Referenced in This Question
Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Integrated Drum
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 4,400 lbs
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Manual Adjust
- 10 x 2-1/4 Inch Drum
- 4400 lbs Axle
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Dexter
more information >
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
Product Page this Question was Asked From
etrailer Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand Assemblies - 3.5K
- Trailer Brakes
- Electric Drum Brakes
- Standard Grade
- Self Adjust
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: etrailer Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3,500 lbs
- Search Results: snowmobile
- Article: Trailer Wiring Diagrams
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: Brake Controller Wiring for Ford E-450 Motorhome
- Q&A: Wheel and Tire Recommendation For Jet Ski Trailer with Tire Size ST175/80R13
- Article: Most Popular Wheel Bearings
- Q&A: Recommended 16' Mesh Tarp for Dump Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Article: Brake Controller Installation: Starting from Scratch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Tester Battery Replacement for Part Number 8010
- Q&A: 2022 Toyota Highlander Wiring for a 7-Way Blade Connector
- Q&A: Parts Needed to Install Brake Controller on 2012 Chrysler Town and Country
- Q&A: Recommended Trailer for Two Titan Propel 12 Kayaks
- Q&A: How to Wire a 6 Pole Round Trailer End Plug