Mounting Hardware for 10" Brake Assemblies
(355 reviews)
Price: $15.60
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (355)
- Q & A (0)
- Videos (1)
- Photos
Redline Accessories and Parts - BRKH10B
- Trailer Brakes
- Electric Drum Brakes
- Hydraulic Drum Brakes
- Hardware
- Redline
- 10 Inch
Use this hardware kit to mount (2) 10" brake assemblies on your trailer. Includes nuts and lockwashers. For assemblies with pre-installed mounting bolts.
Features:
- Allows you to install 2 trailer brake assemblies
- Fits 10" brake assemblies with pre-installed mounting bolts
- Works with electric or hydraulic brakes
- Includes:
- 8 Nuts
- 8 Lockwashers
6-17 Nut for Brake Mounting Bolt
5-8 Lockwasher for Brake Mounting Bolt
Video of Mounting Hardware for 10" Brake Assemblies
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Redline Trailer Brakes BRKH10B Review
Today we're going to take a look at the mounting hardware for 10" brake assemblies. This hardware will allow you to install two trailer brake assemblies to the 4-bolt brake mounting flange on the trailer axle. This hardware is designed to fit the 10" brake assemblies that already have the mounting bolts installed on the assemblies. These will work with electric or hydraulic brakes. It includes everything shown here on the table. It includes eight of the 7/16 by 20 nuts, and they do have a head size of 11/16. Here's a socket that has 11/16.
You can see it fits perfectly. It comes also with the eight lock washers. So, this would be all used to install the assemblies to your axle. That should do it for the review on the mounting hardware for 10" brake assemblies.
Customer Satisfaction Score:
99% were satisfied with this product
1% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Did not arrive in time
Customer Reviews
Mounting Hardware for 10" Brake Assemblies - BRKH10B
Average Customer Rating: 4.7 out of 5 stars (355 Customer Reviews)
Use this hardware kit to mount (2) 10" brake assemblies on your trailer. Includes nuts and lockwashers. For assemblies with pre-installed mounting bolts.by: Don 04/17/2024
After some difficulty removing the nuts on the back of the brake mounting plate, I decided to just order new hardware and toss the old nuts and washers away. Replacement hardware arrived within two days, did not delay re-assy as weather rained. Just a note, I would recommend that e-trailer just include the hardware when you order replacement brake assemblies. 7/16 x 20 nuts are not that common.
by: Matt12/19/2023
The bag of mounting hardware only had the nuts in it. No washers in the bag as the photo indicates. For 16 nuts and bolts, I felt that this was overpriced when I ordered it, but I bought it out of convenience and to save a trip to the hardware store. Showed up without the washers so I had to go to the hardware store anyhow to get the washers. So I ended up paying $14 for 16 nuts that I could have just bought at the hardware store for $1 when I bought the washers. I don't know if the bag I received was packed wrong (no washers) or if the photo on the website was misleading?
by: Jeffrey02/12/2024
Worked good, but I would personally prefer nyloc locking nuts.
by: David 01/12/2023
these arrived fine and as described - these don't appear to be zinc coated - I could not find anything in product description on rust resistance - suppose i will paint.
David
1/13/2024
Worked out fine. Ideally for me these would be stainless for a boat trailer but I ended up painting to protect and should be ok.
by: Tim07/23/2023
Quality of product is good. The wrong size of lock washers were sent which is the reason for the 3 star review. Called customer service to let them know so shipping mistakes were not made in the future. With the old brakes removed, and the trailer on jack stands, I wasn’t going to wait 3 days for a new shipment, so I had to make a trip to the hardware store to complete the installation. Not going to raise a fuss over an $8 mistake.
by: Roderick07/22/2023
Appear to be quality metal; matched up to my Dexter axles and hubs, no issues.
Arrived a couple days after the break kits and hubs; caused a small delay but no issue for me since did not need the trailer currently.
by: Wayne 03/31/2024
As advertised
by: Douglas 08/02/2023
You'd think this should be standard to come with the brake assembly but it wasn't. I could have reused the existing but these are nice and clean and new.
by: Dana 07/24/2023
I couldn't find this item,in-stock, anywhere locally. I should've got it from etrailer.com fromthe start.
by: Fran 04/26/2023
Great, fast shipping. I am confused because somewhere I read that if you buy the Right and Left set of brakes, the mounting nuts are free. Someone posted they had to buy the nuts. So, I ordered them too. P.S. they didn't send any extra nuts.
by: Jerry P. 09/09/2019
Great service. Quick shipment on brake assemblies and tires. Competitive pricing. Found myself a new supplier.
by: Guy 09/12/2023
Very nice, fast shipping!
by: Matthew08/04/2022
the packaging was poor at best. nuts and washers were loose in the box hardly any packaging in the box and because of how it was packaged the insulation on some of the wires was worn away and wires were exposed. I wont be buying from them again unless I absolutely have to.
Jenny N.
8/13/2022
I understand your frustration with receiving the order in this manner. I will share this feedback with our shipping department and I will have our customer service team reach out to you.
by: Darrell M09/23/2017
Excellent quality nuts and washers. If doing brakes, there is no reason to reuse the old mounting hardware!
Darrell M.
9/24/2018
Everything is great! Just had our Band Boosters order new wheels and tires from etrailer!
by: Jeff07/27/2018
Well, you may not see the actual brake controller in these shots, but I wanted to display just how much etrailer product was used to restore this old trailer. Re-decked the trailer, new wheel bearings, added brakes on all 4 with this brake controller and battery powered emergency disconnect... new rust protection, primer and paint, new lights and wiring all the way around, new wiring harness/box, and new tire carrier. Nearly all product except the decking and paint was from etrailer. the customer support was fantastic, I highly recommend this company!
by: Kgh195912/27/2019
Great option if your installing new brake assemblies, don't have to deal with old hardware.
Kgh1959
12/28/2020
These parts work just fine
by: Dudley G09/26/2019
I installed the brakes on the front axle of my boat trailer that carries a 21' fiberglass deep hull off shore boat. They work good as long as you have the controls set to the proper amount of gain. Even with the 5000# weight of my boat if I have the gain too high and hit the brakes too hard they will lock up. This is my second set for the same trailer. I found that no matter what you do not immerse them in saltwater. When I am going into saltwater I remove the brakes and put regular trailer hubs on until I am no longer in the saltwater environment. It's a hassle but I have never felt safe with surge brakes.
by: Rick 06/06/2023
It was nice to receive a product that was everything it stated in the ad. Nicely done, I was able to complete putting on new brakes in an hour.
by: Bradley01/21/2022
New brake assemblies came with hardware so I bought these for nothing because the telephone specialist said I need them.
Jenny N.
1/21/2022
I will have our customer service team reach out to you.
by: JAMES07/22/2019
Hardwear kit not sure why it doesn't come with the backing plates? It did help with a nice new clean install.
Mike L.
7/24/2019
In the product descriptions for the brake assemblies, we mention that the mounting hardware is sold separately.
by: Christine 06/23/2023
Fit well, no issues.
by: Bob11/11/2017
Ordered brake assemblies for all four wheels on a 3500 lb. 2-axle travel trailer with mounting hardware and heat shrinking wire connectors. Everything was very high quality and assembly took about 45 mins. per wheel. It also shipped in two days so I couldn't be happier about the transaction. Thanks.
by: Tim 01/22/2023
Very nice, brake assembly, very quick service, thank you
by: Richard08/19/2019
I’ve been well pleased with the trailer hubs , drums, and electric break assembly and the price was very satisfactory. Made a noticeable difference in in the tow ability of my camper. I’ve recommended this product and etrailer to a number of friends. Will definitely be shopping with you when I need parts.
25
355
Show More Reviews
See what our Experts say about this Redline Accessories and Parts
- Can I Use Self Adjusting Brakes in Place of Manually Adjusting Brakes on my 5th WheelYes, you can replace your old manually adjusting brakes with a set of self adjusting brakes without any issues. You'll want to determine the size of the drums on your trailer axles, which can usually be easily determine by your axle capacity. If you've got 10 inch drums and tandem/triple 3500-lbs axles then you'll want to use the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA. These assemblies do not come with mounting hardware...
view full answer... - Replacement Axle and Brakes for 87 Inch Long 3,500 Pound Axle on Travel TrailerThank you for providing that information. Although we do not have an 87" axle available, you can use the Trailer Axle Beam with Easy Grease Spindles - 89" Long - 3,500 lbs # e38GR. Since this axle is 89" long it will stick out an extra inch on either side of the travel trailer. Also, the spring center is 74" so you will need to cut off the spring seats and weld on # TRSS238 to match your 68-1/2" measurement. For brakes I recommend the Electric Trailer Brake Kit # AKEBRK-35-SA. These self-adjusting...
view full answer... - How to Determine What Electric Brakes Fit Load Star Tow DollyPossibly, but we don't have anything specific for a Load Star tow dolly or know what size brakes it needs so you'll need to check a few things. One is the weight capacity you need, the other is the size of the drum, and another is the brake flange bolt pattern. For example, the Electric Trailer Brake Kit # AKEBRK-35-SA are for 3,500 lb axles, measure 10" diameter x 2-1/4" wide (so that is the drum size they fit in) and fit a 4-bolt mounting flange that has bolt holes which measure 2-7/8"...
view full answer... - Which Hub, Drum and Brakes Do I Need for 3500-lbs Axle with L44649 Outer BearingI may have a solution for you, but there is not an L44549 bearing; it's possible that you mean the # L44649, which is a fairly common bearing and can be found in many hubs that fit on 3500-lbs axles. For a 3,500 lb axle with outer bearing # L44649 and inner bearing # L68149 (1.378" inner diameter) you could use the Bearing Kit # BK2-100 or get a complete hub and drum assembly with the Trailer Hub and Drum Assembly # AKHD-545-35-K; this hub and drum has a 5 on 4-1/2" bolt pattern, which...
view full answer... - Is the etrailer Electric Trailer Brake Kit Quality on Par With Other BrandsThe Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA and other etrailer branded brakes have the same quality that you would find with a more expensive brake assembly. Since they are etrailer branded, we are able to keep the cost down by comparison. These have been tested by QAI and meet the certification requirements of the CSA. They also use automotive-grade friction material which is SAE-N certified. These brakes are a great...
view full answer... - Determining Correct Replacement Brakes for 1973 South Park 1700 Travel TrailerIn order to find the correct electric brakes for your 1973 South Park 1700 you will need to identify what you currently have. Brakes typically correspond with axle capacity and need to match the brake flange bolt pattern as well as the size of the drum on your hub and drum assembly. More than likely you have at least a 3,500 lb axle/axles on your travel trailer so we will start there. For a 3,500 lb 10" x 2-1/4" brake assembly that fits a 4 bolt brake flange you can use the # AKEBRK-35-SA....
view full answer... - What Are the Torque Spec for Brake Mounting Hardware on Dexter 10" Electric BrakesAccording to Dexter, 10" Electric Brake Assemblies like the # K23-462-00 and # K23-463-00 should be secured to the axle with brake mounting hardware like the # BRKH10B. The # BRKH10B should be tightened to between 45-ft/lbs and 70-ft/lbs.
view full answer... - Timbren Axle-Less System With Lift & Brakes for Little Guy Silver Shadow TrailerWe can definitely get your Little Guy Silver Shadow an upgrade to replace your torsion axle, and I recommend going with the Timbren Axle-Less Suspension System. They give you an improved ride compared to a traditional through-axle because they work independently, so if there is a bump on one side of the road it won't rattle your entire trailer, and they have progressive springs that absorb shock better than a traditional axle. The lightest-duty option is a 2,000 lb system, which is enough...
view full answer... - Parts Needed To Replace Hydraulic Drum Brakes With Electric Brakes On Trailer With 3500lb AxleI would be happy to help! Since your Reliable axle has a 3500lb rating you will need to go with the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs # AKEBRK-35-SA, hub and drum assemblies # 84546UC3-EZ, and brake mounting hardware # BRKH10B. This will bolt up directly to your existing brake mounting flange and give you the electric drum brakes you are wanting. In addition you will need to add a 7-way connector to the trailer using the #...
view full answer... - Replacement For Dexter 3,500 lb Hydraulic BrakesThey absolutely will fit; the 023-312-00 you mentioned you currently have are 3,500 lb Dexter hydraulic brakes, and you can replace them with the brake kit you mentioned, which is the following part number: - Hydraulic Brake Kit # AKFBBRK-35-D The only other thing you will need with these 3,500 lb hydraulic brakes is the mounting hardware, the Mounting Hardware for 10" Brake Assemblies # BRKH10B.
view full answer... - Is 4-Bolt Brake Flange Pattern UniversalAssuming you have a standard trailer axle from a reputable manufacturer, it is safe to assume it has the universal 4-bolt brake flange pattern. You will not need to measure before ordering. The Electric Trailer Brake Kit # AKEBRK-35-SA is designed for 3,500 lb axles. As long as these match your axle capacity they will work well as a replacement. If you need mounting hardware the # BRKH10B is also available.
view full answer... - Brake Kit For A Karavan Boat Trailer # US-2450-74-ST-GLTo add brakes to your Karavan Boat trailer # US-2450-74-ST-GL you would need the following items: 1. Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies - 3,500 lbs Item # AKEBRK-35-SA 2. etrailer Trailer Hub and Drum Assembly for 3,500-lb E-Z Lube Axles # AKHD-545-35-EZ-K. This hub and drum assembly is a complete kit with the bearing included. It has been confirmed through Karavan that inner bearing L68149 and outer bearing L44649 are compatible. 3. Mounting...
view full answer... - 3,500 lb Hub & Drum And Electric Brakes For Boat TrailerThose measurements are perfect, thank you so much, and your measurements are for a 3,500 lb axle, so you can indeed use a 3,500 lb hub and drum. Since this is on a boat trailer you will want to go with a galvanized hub, and the exact parts for the hub and electric brakes that fit are the following: - Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized # AKHD-545-35-G-K - Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies...
view full answer... - Can Hydraulic Brake Kit AKFBBRK-35-D Mount With Hydraulic Connector on SideSince the bolt hole pattern is square with the bolt holes equidistant, the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs # AKFBBRK-35-D can be mounted so that the hydraulic connector is on the side if you like as the flange won't interfere. In regards to the distance from hub face to flange with the Dexter Trailer Hub and Drum Assembly for 3,500-lb Axles - 5 on 4-1/2 - Galvanized # 8-247-50UC3 and Brake Kit # AKFBBRK-35-D, without having...
view full answer... - What Size Nuts Are Needed To Secure 10" Dexter Nev-R-Adjust Electric Trailer Brake KitThe Dexter Nev-R-Adjust Electric Trailer Brake Kit part # 23-468-469 uses 7/16"-20 nuts. We do offer these, the Mounting Hardware part # BRKH10B.
view full answer... - Width of Hydraulic Brake Kit AKFBBRK-35-DThe width is 2-1/4" for the Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs # AKFBBRK-35-D, so you will need hub and drums that are at least that wide for these to fit; though that width (or more) is standard for 3,500 lb, 10" hub and drum assemblies. To mount the Hydraulic Brake Kit # AKFBBRK-35-D you will also need the Mounting Hardware for 10" Brake Assemblies # BRKH10B. If you need a hub and drum as well, I've added a link below to our...
view full answer... - Replacement 10 x 1-1/2 Electric Brake AssembliesI have a solution for you, but we do not have a self adjusting brake assembly like the # K23-478-479 available in a 10" x 1-1/2" brake. Instead, you can use the Dexter Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3,000 lbs # K23-472-473-00, which is 1-1/2" wide and mounts to a 4 bolt flange. These assemblies don't come with mounting hardware included, but you can use the # BRKH10B to replace your old mounting hardware.
view full answer... - Which Electric Brakes will Fit on My 2007 Keystone Outback? Part # AKEBRK-35-SA should work for your application, but you still need to measure your current brake drums to be sure. This brake kit is for 3500 pound axles, which your trailer likely has since it is a tandem axle trailer with a weight capacity of 7 thousand pounds.This brake kit is a straight forward install and the reviews on this product are great. You also need hardware for install part # BRKH10B. To measure your break drums, you measure the interior diameter of the drum. I have...
view full answer...
- How do I Correctly Measure Drum Brakes?When measuring the brake drum, you measure the interior diameter on the drum. I have attached a photo to help during the measuring process. If your brakes are 7 inches part # AKEBRK-2 works for your application. You also need hardware part # BRKH7 If your brakes are 10 inches part # AKEBRK-35-SA works for your application. You also need hardware part # BRKH10B If your brakes are 12 inches part # AKEBRK-7-SA works for your application. You also need hardware part # BRKH12
view full answer...
- What Size Trailer Brakes for 3500-lbs Axle With 13 WheelsIt's really going to come down to the size of the drums that you've got on those axles; there are exceptions to some rules but generally speaking 13 inch trailer wheels will work with 10 inch hub and drums, just not disc brakes. Your wheels might be manufactured differently than most and there isn't a clearance issue like on most, so it's most likely that you have 3500-lbs brakes that are for 10" drums. For 10" hub/drums, the # AKEBRK-35-SA are the best choice for self adjusting brakes....
view full answer... - Dexter Nev-R-Adjust Electric Brake Kit Compatibility with 2015 Casita Travel TrailerThe Dexter Nev-R-Adjust Electric Trailer Brake Kit - 10" - Left and Right Hand Assemblies - 3.5K # 23-468-469 will work with the brake flange, hubs, and axle of your 2015 Casita RV. These are really nice self-adjusting assemblies that simply need you to hit your manual override on your brake controller a few times after install to help them adjust while traveling at low speed. Then the assemblies will self-adjust as needed. These Dexter brake shoes and magnets are really good quality...
view full answer... - Recommended Trailer Brake Assemblies and Hubs to Add Brakes to 3,500 lb AxleFor your Cargo Mate trailer with 3500 lb axle, you will need the Electric Trailer Brake Kit # AKEBRK-35-SA. These will mount to the flanges on your axle using hardware # BRKH10B. If you don't have flanges, then I recommend the flange # 4-35 that will need to be welded by a professional with the correct jig. Because almost all 3500 lb axles from all manufacturers use the same spindle size, you can then use the Trailer Hub and Drum Assembly - 5 on 4-1/2 bolt pattern # AKHD-545-35-K or...
view full answer... - Do Self-Adjusting Trailer Brakes Adjust Going Forward or in ReverseActually, it is recommended to make the very first brake adjustment manually on self-adjusting trailer brakes such as # AKEBRK-35-SA. This is so the brakes are ready to go without having to wait for them to adjust out while you drive (forward or reverse). Basically there is a device on the adjustment wheel on these brakes that prevents the shoes from adjusting back inward. You have to sort of move that out of the way to be able to turn the adjustment star wheel easier. The video I have...
view full answer... - Recommended Solution to Replace Torsion Axle on 3500-lbs Boat TrailerI may have a solution for you, but we do not offer torsion axles; however we can help you find something to replace your old axle. I recommend using a Timbren Axle-Less Trailer Suspension System - 4" Lift Spindle - Regular Tires - 3,500 lbs # ASR3500S06, which are a great axle replacement solution that helps improve ground clearance and provides you with a suspension and axle all in one. If you're going to go without brakes you can use the Dexter Trailer Idler Hub Assembly for 3,500-lb...
view full answer...
Do you have a question about this Accessories and Part?
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Expert Research:
Jameson C
Written by:
Alexander C
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Brooke M.
12/20/2023
Gosh, I am so sorry you ended up having to run to the store - you shouldnt have to do that! The picture is accurate - your bag was missing the washers. I have sent your information to our customer service team to have them contact you about the missing pieces and what we can do to make it right.