bing tracking image
  1. Trailer Hubs and Drums
  2. etrailer
  3. 5 on 4-1/2 Inch
  4. For 3500 lbs Axles
  5. Hub
  6. 13 Inch Wheel
  7. 14 Inch Wheel
  8. 14-1/2 Inch Wheel
  9. 15 Inch Wheel
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased

Item # AKIHUB-545-35-K
Our Price: $51.96
Trailer Hubs and Drums
Shipping Weight: 9 lbs
Add to cart
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included. Great Prices for the best trailer hubs and drums from etrailer. Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased part number AKIHUB-545-35-K can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (206)
  • Q & A (0)
  • Photos

etrailer by AxleTek Trailer Hubs and Drums - AKIHUB-545-35-K

  • 5 on 4-1/2 Inch
  • For 3500 lbs Axles
  • Hub
  • 13 Inch Wheel
  • 14 Inch Wheel
  • 14-1/2 Inch Wheel
  • 15 Inch Wheel
  • Pre-Greased
  • Standard
  • 1/2 Inch Stud
  • L44649
  • L68149
  • etrailer

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.


Features:

  • Trailer hub assembly fits idler axles
    • Bearings, races, seal, grease cap, and lug nuts are included
  • Sturdy iron construction
  • Zinc-enriched paint finish
  • Pre-greased idler hub is easy to install - no need to pack bearings
    • Lithium complex, multipurpose grease keeps bearings lubricated
  • QAI and CSA certified


Specs:

  • Application: 3,500-lb trailer axles with #84 spindles
    • Compatible with standard axles from most manufacturers, including Dexter, Lippert (LCI), and AL-KO
  • Wheel size: 13" to 15"
  • Bolt pattern: 5 on 4-1/2"
  • Wheel stud dimensions: 1/2" diameter x 1-5/16" long
  • Grease cap flange diameter: 1.988"
  • Weight capacity: 1,750 lbs
  • Limited 1-year warranty


Bearing, Race, and Seal Information

  • Bearings (included)
    • Inner bearing: L68149 (1.378" inner diameter)
    • Outer bearing: L44649 (1.063" inner diameter)
  • Races (included)
    • Inner race: L68111
    • Outer race: L44610
  • Grease seal (included): 58846
    • Inner diameter: 1.719"
    • Outer diameter: 2.565"

Determining the Bolt Pattern

The first number in the bolt pattern is the number of bolt holes. The second number denotes the diameter, in inches, of the circle on which the bolt holes sit.


Bolt Pattern - Even

On wheels with an even number of bolt holes, measure from the center of one bolt hole to the center of the hole directly across from it. (Example: 8 on 6-1/2 means 8 bolt holes with 6-1/2" from the center of one hole to the center of another on the opposite side.)


Bolt Pattern - Odd

To determine the bolt-circle diameter on wheels with an odd number of bolt holes, measure from the center of any bolt hole to the point halfway between the two bolt holes directly across from the first. (Example: 5 on 4-1/2 means 5 bolt holes with 4-1/2" measured to a point halfway between the opposite bolt holes.)


Bolt Pattern - Side

Measuring the distance (D) from the center of one bolt hole on the wheel to the center of a bolt hole right next to it can also help to determine the bolt pattern.

  • If D = 2-5/8", then the bolt pattern is 5 on 4-1/2"
  • If D = 2-3/4", then the bolt pattern is 5 on 4-3/4"
  • If D = 3", then the bolt pattern is 5 on 5"
  • If D = 3-1/4", then the bolt pattern is 5 on 5-1/2"


KH-545-07-19 AxleTek Trailer Idler Hub Assembly for 3.5K Axle with Hardware - 5 on 4-1/2 - Pre Greased

Compare to Dexter 84545BX





Customer Satisfaction Score:


Customer Reviews

Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased - AKIHUB-545-35-K

Average Customer Rating:  4.8 out of 5 stars   (206 Customer Reviews)

Hub is designed for use on trailer idler axles. Fits 3,500-lb axles with #84 spindles. Inner bearing (L68149) and race, outer bearing (L44649) and race, grease seal, grease cap, and lug nuts included.

by:

I ordered the Idler hub (pre-greased) for the 3500 lb axle I have just installed it and it fit perfect

Frank

3/11/2024

Have had no problems each trip is about 200miles and I have made numerous trips



by:

was an interesting job. had to buy a bearing puller to get of the old race then this went on and has been fine now for a year now. I bought both sides but only did the wobbly wheel as I don't like to fix what isn't broken yet.



by:

Finally got them in today (Postal Service delayed them in Memphis) and they are just as I ordered. Changed them out with the old hubs with no problem except the dust cover was just barely too big for my axle. No problem I just used by old dust covers.



by:

I’m very upset. I have ordered a lot of stuff from you, but this order really was bad. First off. It’s missing two Lugnuts. They gave me two that were too big as well. Also, dust covers do not fit. The solid ones do at least I think the ones with the rubber metal do not fit. I know they are hard to get in, and I am very experienced with putting them in and I could not get them to go in. Hopefully I haven’t tried them but the solid dust covers will work. If not, I will have to buy some bearing buddies. I don’t know if I will be using you again cheap Chinese stuff you’re selling

Etrailer Expert

Jenny N.

8/30/2023

I am sorry that it came with missing hardware and that the grease caps are tough to tap into place. I will have our Customer Service team reach out to you.



by:

Ordering was easy. I had some questions so I called. Tammie was very helpful and took my order. Hubs arrived in 2 days. Installed easily and works perfectly. etrailer is a great company to do business with.



by:

Etrailer tech (George J) was great helping me pick this out for my trailer



by:

Everything has worked as should



by:

They look good, will be installing and finishing a total light job, complete switch to electric brakes, safety trigger, battery by the end of next week. Thank-you etrailer!



by:

The right parts at the right price !



by:

I put the new hub assembly on for my Lil' Hobo retro camper trailer. The hub assembly doesn't come with a washer and nut for the spindle, so you need to save your old ones or buy these separate if you don't have them. I put it on with new tires and wheels, upgrading from a four bolt to five bolt pattern.



by:

Good price, right fit for my trailer per my research on your website. Short wait time on delivery. If product lasts, very pleased with overall experience with your company. Thank you.



by:

Parts fit and worked as like they should. Fast shipping.



by:

Just a quick note to say thank you to eTrailer for not only the quality of parts received but also to Melissa for the dedicated service and attention that was given to me when placing my order.

THANK YOU MELISSA for all of your help!
Looking forward to my next purchase!



by:

Converted my trailer to 5x4.5 so I could use standard rims. Everything worked great. I ordered 2 drums and 2 hubs. Everything included.



by:

Fast delivery
...the hub and bearing
set should include cotter pin had to replace them and for an additional couple of cent it far to Loews.
Thanks anyway



by:

Not much to see, but here are pics of the installed new hub and Bearing Buddy.



by:

My trailer originally had 5/ 4.75 hubs but decided to change to 5/4.5 hubs since my other trailer has the 5/4.5 hubs. Very happy with my purchase.



by:

Perfect fit. I can always count on Etrailer for all my trailer needs



by:

Got pre packed hubs for boat trailer they fit perfect just as described!! Fast shipping. Would recommend A plus



by:

The hub is nice fit perfect. The included dust caps however had to be beaten in. Hard.



by:

i told the person on the phone that both bearings were the same size and what was shipped was two different bearings. so i could not trailer my boat and missed out on the tournament. unexceptable



by:

Worked like a charm great product



by:

If you want a accurate review you may want to wait more than 2 hrs after delivery to request a review



by:

Product works great and was easy to install. I don't think it came with the castle nut pin, which might be problematic for some people who don't have hardware collections at their work space. It might help those who are unfamiliar with hub installation to get an install guide with the product. I could see someone over tightening the castle nut and ruining their new bearings.

Ian K.

11/14/2017

Great! I checked them after about 250 miles of use and they were still tight and in great shape. They were exactly as described and perfect for my application.



by:

Works great and fast shipping. Customer service is great too.


25
206
Show More Reviews

See what our Experts say about this etrailer Trailer Hubs and Drums

  • Hub Recommendation for Spindle with Diameters of .75 and 1.25 inches
    From the measurements you gave me, it sounds like you have an Agricultural Spindle like # TRU54FR that uses # LM67048 Inner bearing and # LM11949 Outer bearing. For a hub assembly with a 4 on 5 bolt pattern # AH15450ECOMP will work and the bearings, seal and cap are included. I linked the parts along with a few review videos for you to reference.
    view full answer...
  • Replacement Trailer Hub for Tandem Axle 1987 Ranger Boat Trailer
    I was not able to reference your outer race " L44110", however I believe the race you have is L44610 which would be correct for a L44649 outer bearing. In addition to the outer race, the grease seal number and dimension you gave do not match the bearing/race listed above. It is possible that either the wrong seal was installed or the dimensions have changed as the correct seal for the above bearings/races is a 58846 seal which has a 1.719" inner and 2.565" outer diameter. With that being...
    view full answer...
  • Is It Possible To Remove Brakes On 3,500lb Axle And Replace with Idler Hub?
    Physically? Yes. Legally? Maybe. Assuming your axle is a 3,500, which is by far the most common, you can remove the 10" brakes from the backing plate and replace the hub and drum assembly with an idler hub like # AKIHUB-545-35-K. With that said if your trailer has brakes it's almost 100% due to them being required by law. Brake laws vary state by state, but if you'll be using the trailer on the road you could open yourself up to tickets and lawsuits should you have an accident and you...
    view full answer...
  • Lug Nut Torque for 15 inch Wheels of KZ E181RB
    For the 15 inch wheels of your KZ E181RB you should use 90-120 ft lbs of torque for the lug nuts.
    view full answer...
  • Pre-Greased Trailer Hub for 2015 Jayco Jayflight 185 RD
    Since your 2015 Jayco Jayflight 185 RD has a 3,500 lb axle the pre-greased hub part # AKIHUB-545-35-EZ-K is the correct fitting hub. It looks like you have a 5 on 4-1/2 inch bolt pattern too so that matches as well.
    view full answer...
    Image 1 for
  • How to Determine Correct Replacement Hub for Gator Trailer
    Does your trailer use roller or sealed bearings? According to Dexter Marine, who now owns TDE, the 46201 used sealed bearings. We don't carry a hub that small that uses sealed bearings, but if you could reply and provide me with the diameter of the spindle where the bearing rides, I'd be happy to see if we offer a proper replacement. The # AKIHUB-545-35-K hub you mentioned isn't a likely fit, as it's compatible with a tapered spindle which a sealed bearing typically uses a straight spindle.
    view full answer...
  • Replacement Trailer Hubs Using L68149 and L44649 Bearings
    It sounds like you have inner and outer bearings # L68149 and # L44649 respectively. That's a very popular combination on a # 84 spindle but the seals are normally 1.719 inches inner diameter. I would verify that number. If this is correct there's a still a number of options that could be your correct hubs depending on whether you have drums, what bolt pattern they are, and whether you have EZ Lube spindles or not. I'll list all the optoins for you. 5 on 4-1/2 bolt pattern: Standard...
    view full answer...
  • Replacement Bearings for idler hub with LM4858 Inner Bearing
    I have a solution for you, but we do not have any hubs that are compatible with the item # LM48548 inner bearing that you currently have. .003 is a tiny difference but that can still cause problems down the road so I do not recommend replacing your hub with the etrailer Trailer Idler Hub Assembly item # AKIHUB-545-35-K. You could continue to use your old hubs and simply replace the bearings. The inner bearing is item # LM48548 and for the race you'll want the Replacement Race for LM48548...
    view full answer...
  • Availability of Pre-Assembled and Pre-Greased 3,500 lb Trailer Axle Hub
    The Trailer Idler Hub Assembly 3,500 lb axle part # AKIHUB-545-35-K matches what you listed. It has the correct bearing size, capacity, and bolt pattern plus it's pre-assembled and greased so it's ready to go!
    view full answer...
  • Correct Idler Hub Replacement for Dexter 84546 Hub
    Yes, the Trailer Idler Hub Assembly part # AKIHUB-545-35-K will work in place of a Dexter 84546 Hub.
    view full answer...
  • Hub/Drum Solution for Trailer with 3,500 lb Axles
    The 3,500 lb axles uses hubs like the part # AKHD-545-35-K for a hub/drum solution or part # AKIHUB-545-35-K for just a hub. Both of these options are pre-greased too which means you can take them to your trailer and just slide them on without having to mess with packing the bearings.
    view full answer...
  • Will etrailer.com Hub AKIHUB-545-35-K fit Trailer Hub with Bearing Spindle Diameter 1.06 and 1.375
    The spindle dimensions you listed are totally compatible with the Trailer Hub part # AKIHUB-545-35-K that you referenced. The overall length of the spindle would not be an issue either.
    view full answer...
  • How To Troubleshoot A Trailer Hub Overheating
    There can be a few different causes for excess heat on a trailer hub assembly. The first thing I would do is to ensure the bearings are installed correctly with the proper amount of lubrication. The next thing you will want to check is that the castle nut is not torqued down in excess of what the manufacturer recommends. The last thing that could be causing your hub assembly to overheat is extensive contact between the rotor and brake caliper. To correct the issue, you will want to remove...
    view full answer...
  • How to Determine Correct Replacement For UFP H1377 Hub
    I'm sure we can get you a pre-greased hub assembly to replace your UFP H1377, but I was unable to find any definitive information on exactly what will replace this hub. So in order to find the correct hubs you will need to take apart your current hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If you are unable to find them, you need to use a digital caliper and measure your spindle where the...
    view full answer...
    Image 1 for
  • Can You Retrofit Hub to 3,500 lb Dexter Trailer Axle T3584F-8974
    Appreciate that detailed info, and while it would be great if that was possible so you didn't have to get a new hub, there isn't a way to retrofit your old hub on the 3,500 lb Dexter Trailer Axle Beam with Standard Spindles # T3584F-8974. There isn't a kit for this type of application, and the bearings your old hub uses simply won't fit onto the spindle of this axle. So you will need a new hub that uses the bearings L68149 and L44649 such as the Trailer Idler Hub Assembly for 3,500-lb...
    view full answer...
  • 3,500 lb Capacity Idler Hub Recommendation that Comes with Marine-Grade Grease
    I have a solution for you, but the part # AKIHUB-545-35-K does not come with marine grade grease. Instead you would want the part # CE13511 as it is essentially the same spec hub in terms of bolt pattern and what spindle it fits except it does come with marine-grade grease.
    view full answer...
  • Identifying Capacity and Replacement Parts for UFP Axle
    According to Dexter, this is a 3,750 lb torsion axle with a 90.3" hub face measurement. More than likely your axle uses # L68149 and # L44649 bearings with a # 168255TB grease seal. You will need to verify this information since Dexter did not have it available. Assuming that is correct, we have the following parts available depending on what you need: -Trailer Idler Hub Assembly # AKIHUB-545-35-K -Trailer Hub and Drum Assembly # AKHD-550-35-K -Electric Trailer Brake Kit # AKEBRK-35-SA -Dexter...
    view full answer...
  • What Parts do I Need to Upgrade My Hubs to 5 on 4-1/2 on My 3,500 Pound Axles?
    If you have 3,500 pound axles, the hubs you need depend on if you have brakes or not on the trailer. Here are the hub recommendations: - Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K (compatible with brakes) - Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 # AKIHUB-545-35-K (without brakes) However, it is extremely important to note that these hubs are only compatible if you have 3,500 pound axles. In order to confirm the axles...
    view full answer...
  • Availability of Dexter 3,500 lb Trailer Axle Hub that is Pre Greased Jamseson, you recommended
    The star shaped idler hub is how Dexter designs their hubs whereas the etrailer part # AKIHUB-545-35-K uses more of a flange. They are interchangeable though and there would be no issue going from one to the other. We have this exact style you are looking for with part # 84545UC1-EZ and it comes with a new spindle nut, washer, and cotter pin so it sounds like more what you are looking for. It is also pre-greased.
    view full answer...
  • Can Hub for 3,500 lb Axles be Used on Axles With Different Weight Rating
    That is a good question but the Trailer Idler Hub Assembly for 3,500-lb Axles # AKIHUB-545-35-K can absolutely be used on your axle rated for less than 3,000 lbs. What matters is that you have the same # L68149 inner bearing, # L44649 outer bearing and # 58846 grease seal because this means the hub will fit your spindle. These are most often found on 3,500 lb axles but can be used on an axle with less capacity with no issues.
    view full answer...
  • Axle Replacement For Older Axle That Uses Obsolete LM67048 Inner and Outer Bearing Combination
    I have a few options for you, but unfortunately we do not offer a hub assembly that uses inner and outer bearing LM67048 and I was unable to find a compatible hub through other vendors. If your current hubs are reusable but need new bearings, then I recommend replacing them with # LM67048. If your hubs are not reusable then the only option will be to replace your current axle with one that uses a standard bearing combination. To determine the correct replacement axle you will need to...
    view full answer...
    Image 1 for
  • How to Choose the Correct Pre-Greased Replacement Hub for Snowbear Trailer
    There are pre-greased hubs available in a 5 on 4-1/2 bolt pattern. In order to find the correct replacement hub you can take apart your good hub assembly and look at the bearings themselves; wipe away the grease and you should be able to see the part number stamped directly on them. If your hub has inner and outer bearings # L44643 you'd need CE Smith Trailer Hub Assembly w/ Carrying Case for 2,500-lb Axles - 5 on 4-1/2 - Pre-Greased # CE13210. Should your hub have inner and outer bearings...
    view full answer...
  • Option for Adding Grease Fitting to Trailer Spindles that are Non-EZ Lube
    If your axle spindles do not have grease fittings on the end of them (which they most likely do not based on what you stated) there really isn't a way to convert them to EZ lube style hubs/spindles without replacing the spindles as well. A different and easier solution that you might be interested in is a Bearing Buddy setup. This fits as a replacement for the trailer hub's dust cover and gives you a zerk fitting you can use to pump grease into the hub. In order to pick out the correct...
    view full answer...
  • Installing Electric Brakes on a Vehicle Tow Dolly
    You have a 3500 pound axle, with a 4-bolt axle flange, spaced 4” apart each. You also have tires and wheels with a 5 on 4.5 bolt pattern. To put brakes on your West Texas Dolly # WTD-35D you will need a left and right trailer brake kit like the etrailer # AKEBRK-35 rated for 3,500 pounds, and 10” x 2-1/4” brake pads. Mounting bolts are included but nuts and lock washers # BRKH10B are not. If it were me I would purchase the etrailer # AKEBRK-35-SA self adjusting brakes so that I would...
    view full answer...


< Previous
123. . .6



Do you have a question about this Trailer Hubs and Drum?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee John H
Expert Research:
John H
Employee Adam R
Expert Research:
Adam R
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Jeff D
Installed by:
Jeff D
Employee Shane H
Installed by:
Shane H
Employee Kathleen M
Video Edited:
Kathleen M
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.