Videos
for Wheel Masters
Help Articles
for Wheel Masters
Expert Answers
for Wheel Masters
Most standard pin boxes will not make a 90 degree turn in anything less than an 8 foot truck bed, but that is due to being too close to the cab - not the rails. You mentioned you wanted to replace the Rota-Flex with the Gen-Y hitch. Your old pin…
view full answer...Although we do not have a direct replacement for the Dicor V19582-EJN, the Replacement Wheel Master Lug Nut Cover for Wheel Liner - Qty 1 #WMRMT9061 will fit a 22 millimeter lug nut. From what I have found, the jam nut you are looking for has been…
view full answer...Thanks for the pictures, I can see why you're concerned now. It looks like you have some 135 degree valve extenders that just aren't quite long enough to pass through the hand holes of the wheel cover. You could try using a longer 180…
view full answer...The overall length of the hoses that come with the Wheelmaster Inflation kit part #WM8009 is 7 inches.
view full answer...Yes, the Wheel Masters 4-Hose Inflation Kit #WM8001-135 that you referenced does fit your 2018 Ford F-450 dually. I checked the wheel size of your vehicle (19-1/2 inch diameter) and found that it uses the correct size to use this kit.
view full answer...For wheels with smaller hand holes like your setup has we know the Wheel Masters 4 Hose Inflation Kit #WM8001-135 would work well. Check out the attached picture and you can see them installed on a similar style wheel.
view full answer...You were on the right track- the Wheel Masters 2 Hose Inflation Kit #WM8009 are designed for 16" to 19-1/2" wheels like the ones on your Winnebago Access and will work with TPMS systems. The 7-1/2" hose length is going to…
view full answer...For the Wheel Masters 4-Hose Inflation Kit - 16" to 19-1/2" Dually - Hub Mount - 135-Degree Bend #WM8001-135, the inner hose is 13 inches straight and the outside hose is 9-1/2 inches. I've attached a photo to help.
view full answer...Yes we do carry the B and W gooseneck ball and safety chain loop kit part #BWGNXA2062 that you are looking for. This does fit your 2022 Ram 2500 with the OEM pucks.
view full answer...From the connection point to the end of the bend in the Wheel Masters 4-Hose Inflation Kit #WM8001-135 is approximately 1-1/2" in length. You could try sticking a tape measure in there and measuring out 1-1/2" at a 135 degree angle…
view full answer...The Replacement Jam Nut #WM9073 referenced in your question is designed to replace those for the Wheel Masters 19J0J series liners. Based on the pictures I was able to pull up of the wheel covers on the 2001 Holiday Rambler motorhomes these do…
view full answer...For your 2014 Ford F-250/350 Super Duty you will want to use Wheel Masters 4-Hose Inflation Kit part #WM8001. The bend on the Wheel Masters 4-Hose Inflation Kit part #WM8001-135 causes the hoses to be in contact with your rim as soon as it comes…
view full answer...
What our customers are saying:
"WOW! I am impressed! I called to place my order and real person answered, spoke perfect English, albeit a slight southern accent, and my order was sent within a day, shipped quickly and I had it a few days later. I saved over a hundred dollars over local and installed it my self. I cant imagine how that they could do any better. THANKS!"