Videos
for Carpod
Help Articles
for Carpod
Expert Answers
for Carpod
There are a couple of primary differences between the Carpod Walled Cargo Carrier #M2200-2201 and the upgraded #M2205-2201. The first difference is that the Carpod #M2205-2201 features a hinged shank that allows you to fold up the carrier against the…
view full answer...With J-pin style hitch stabilizers like the discontinued part #63201 they are designed to go through the hitch and shank with the larger hole and then the j portion comes around and locks into the smaller hole. It almost sounds like you are trying…
view full answer...From the pictures you sent it looks like your setup is overloaded. It is important to remember that the use of an extender like this will reduce the capacity of your hitch by 50%. That means if you have a hitch like the Curt #C13388, your maximum…
view full answer...We do have a version of the Carpod Carrier with Cargo Bag part #M2205-01-02 available without the cargo bag as part #M2205-2201. It's exactly the same just without the bag!
view full answer...The best way to determine if a carrier will clear the tailgate on your Tacoma is to take a quick measurement. Just measure from the top of the trailer hitch receiver opening to the top of your rear bumper. I have attached a photo that shows you how…
view full answer...I went and grabbed a Curt Cargo Carrier part #C18151 to grab the pin hole dimensions you requested. From the pin hole to the end of the shank that slides into the hitch it measures 2-1/2 inches and from the pin hole to the nearest rails of the…
view full answer...There are quite a few differences. The ones you can see easily on the outside are the display and control buttons. The P3, part #90195, uses a multi-color LCD to provide more information where as the Primis IQ uses basic LED numbers like what you…
view full answer...Installation of wiring harness #C56331 on any given vehicle depends on how the power wire is routed from the back of the vehicle to the front of the vehicle. It does take some time. If the tech just zip ties the wire to the bottom of the vehicle,…
view full answer...We do have license plate brackets like part #LP10SB that you could use to move your license plate so it sits behind the 23x47 Carpod Walled Cargo Carrier #M2205-2201. If you plan on driving at night time you should make sure to have a bracket with a…
view full answer...Yes, we do carry the 24x48-3/4 Carpod Walled, Folding Cargo Carrier - 2" Hitches - w/ Lid, Bag, Rise Shank part #M2205-01-02 without the bag with part #M2205-2201. This Carpod has an outside dimension of 48-3/4" long x 24" wide x…
view full answer...The recommended cargo bag for the Carpod Carrier part #M2205-2201 that you referenced is the Carpod Bag part #M2202. This bag is specifically designed to fit the inner dimensions of the #M2205-2201 so it would be the best choice. This bag is weather…
view full answer...Yes, trailer wiring harness #C56332 does have a fuse in a red holder near the large black converter box. If that fuse is fine, then use the vehicle owner's manual to find any fuses related to tow package wiring on the vehicle to check them. If…
view full answer...
What our customers are saying:
"I have shoped all over the web and by far you are the lowest price and the 3day free shipping just cant be beat!!!!!!"