Videos
for Jif Marine
Help Articles
for Jif Marine
Expert Answers
for Jif Marine
The 2-Speed Boat Trailer Winch part #315-W3200D is an excellent upgraded 3,200 lb winch for a boat trailer. In regards to mounting, not all winches use the same pattern so you'd need to compare the dimensions in the photo below to what you have…
view full answer...The size winch that you will need depends on a couple of different factors. I have included part of our hand winch FAQ below regarding boat winches and have linked the FAQ article for you to view. Finding the Right Capacity Winch for your Boat…
view full answer...I would be happy to help! The differences between these two ladders is not that one is for flat front mounting and the other for a round front, instead the #JIF65FR is designed for pontoon boats with a round front, and the #JIF25FR is designed for…
view full answer...We do not have any hub caps that fit trailer wheels. If you were wanting to go with something nicer looking you'd need to replace the wheel with something like the Westlake ST205/75-14 part #WST57FR or any of the other aluminum wheel options at…
view full answer...Yes, the strap on the #315-W3200D can be installed so that it comes from the bottom instead of the top. However, doing so will reverse the switch and the direction you turn the handle for operation. The self-locking mechanism will work either way.…
view full answer...I attached a diagram that shows the various dimensions of Sliding Under Platform Pontoon Boat Ladder - 3 Steps - 34-1/2" Tall - 400 lbs - Stainless Steel #315-FOG3. The mounting brackets measure 11-7/8" long, 12" from outside edge to…
view full answer...Although the #348776 you'd looked at would do the job, going with a winch that has a higher capacity than what you actually need is a good idea. The winch won't need to work as hard. With this in mind, I'd recommend the #315-W2000D from…
view full answer...The 3,200 lb 2-Speed Boat Trailer Winch with 20' Strap and Brake #315-W3200D will be sufficient to pull in your 3,190 lb boat if your trailer has rollers on it as that will make your boat easier to move. If you have bunks then it will technically…
view full answer...I do have a video for the Fulton #F142401 which is nearly identical to the #F142400 that you were looking at. The only difference is that the #F142401 can be used with a strap or wire rope, while the #F142400 can be used with rope only. Other than…
view full answer...The base on 2-Speed Boat Trailer Winch #315-W2500D measures 5-3/4 inches wide by 7-1/8 inches long. I have included a picture showing this for you and a link to a video review on this winch.
view full answer...The distance from the front hole to the beginning of the slotted mounting hole on the bottom of the Jif winch part #315-W1800D is 3.5 inches and then the distance to the rear of the slotted hole is 5 inches so you'd be able to line up two of your…
view full answer...I had the Fulton XLT 2-Speed Trailer Winch #F142425 measured and have a picture included with the corresponding measurements. Red: 2-3/4" Blue: 4-1/8" Green: 5-3/4" Pink: 6-7/8"
view full answer...
What our customers are saying:
"I like the easy of navigation through the site. It only took me a couple of minutes to place my order. Thank You I will shop this sight again in the future."