Videos
for Lock N Roll
Help Articles
for Lock N Roll
Expert Answers
for Lock N Roll
There is a trailer coupler designed specifically to be used for offroading, from Lock N Roll. This uses an articulating connection between the coupler and accompanying hitch mount that gives a full 360 degree rotation between the two. So the…
view full answer...Hey Sam, thanks for reaching out! The Ark Articulating Off-Road Coupler for 2" Receivers #AR44FR is a great way to add some versatility in where your trailer can be towed, but since everything can move around it does present some challenges…
view full answer...The Lock N Roll Articulating Coupler #336TS504 dimensions for the A-frame are 2.19" at the narrowest part and 11.22" at the widest part of the opening. It is 9.68" long from largest opening to narrowest. I have included a…
view full answer...Although the Lock N Roll Articulating Trailer Coupler for 2" Receivers #336TS510 has a 5/8" pin hole to secure it to your trailer, you can definitely weld this to your trailer instead. Just be sure the work is done by a qualified…
view full answer...I spoke with my contact at Lock N Roll about the Lock N Roll Articulating Hitch part #336VS503505 and they were not quite sure what measurements you are looking for nor was I. That said, I went out to our warehouse for you and jotted down a few…
view full answer...The #336VS503515 comes with the adjustable channel bracket along with the adjustable channel mount and bolts. You will need to install the channel mount in the appropriate rise/drop position since it does not come fully assembled. It looks like you…
view full answer...The vehicle side of the Lock N Roll Articulating Trailer Hitch #336VS501 can be locked to the vehicle's 2-inch receiver hitch using any standard pin lock such as #e98880. The mating part that bolts or welds on to the trailer #336TS508 will…
view full answer...We do carry the 33" Ark Stabilizer Jack that you are looking for with part #ARK77FR. I was able to track down a few drawings that you should find helpful. These are for the 30" #ARK94FR and the 24" #ARK34FR Stabilizer…
view full answer...For a hitch pin for the Lock N Roll Articulating Hitch w/ 3-Position Channel #336VS503505 I recommend the InfiniteRule Locking Pins for Lock N Roll Articulating Hitch for 2" Hitches - Qty 2 #IR59FR. This set of pins is specifically designed for…
view full answer...Per SeeLevel, for a stacked configuration of the SeeLeveL Sensor for RV Holding Tank Monitor - 9" Long #SE88VR you just cut the top sensor.
view full answer...I contacted the manufacturer about the lengths for these stabilizer jacks and have included the information they were able to provide me. The Ark Drop Down Corner RV Stabilizer Jacks #ARK34FR are 422 mm (16.6") collapsed and 600mm (23.6")…
view full answer...In regards to the Lock N Roll Articulating Channel Tongue Trailer Coupler part #336TS528, the distance from the bottom of the coupler base to the center of the mounting hole is 1-1/2".
view full answer...
What our customers are saying:
"Fast fast fast, excellent website. I wish all stores online or not would work this well."