Videos
for Phoenix USA
Help Articles
for Phoenix USA
Expert Answers
for Phoenix USA
Most standard pin boxes will not make a 90 degree turn in anything less than an 8 foot truck bed, but that is due to being too close to the cab - not the rails. You mentioned you wanted to replace the Rota-Flex with the Gen-Y hitch. Your old pin box…
view full answer...I have a possible solution for you, but the Replacement Phoenix USA Rear Wheel Center Cap #PXPH1764 is actually designed to be used on 10 lug applications, not 8 lug. It sounds like Replacement Phoenix USA Rear Wheel Center Cap - 6-1/2" or…
view full answer...Yes, the Kenda Karrier ST175/80R13 Radial Trailer Tire #AM31990 will indeed fit on the etrailer Hitch Mounted Spare Tire Carrier #e98ZR. The spare tire carrier will work with virtually any 4 lug, 5 lug or 6 lug wheel. The #AM31990 wheel uses the…
view full answer...The Phoenix USA Rear Wheel Center Cap #PXQ1020L is designed for a 8 on 275mm bolt pattern while the Phoenix USA Rear Wheel Center Cap #PXQ2020XL is designed for a 10 on 285mm bolt pattern.
view full answer...Since your bracket and center bolt piece is damaged, I recommend to use the Phoenix USA Wheel Center Cap - 6-1/2" Axle Diameter part #PXQ2010L which comes with the replacement left hand threaded center bolt and bracket. The OEM replacement part…
view full answer...The correct grease cap for the Dexter Trailer Hub and Drum Assembly for 8,000-lb E-Z Lube Axles #DX46XR is the #TRU66FR.
view full answer...You will need either the Phoenix USA Rear Wheel Center Cap Right Hand Thread #PXQ2010XL or Left Hand Thread #PXQ2010L if you have a 6-1/2" wide hub. Otherwise you will need the Right Hand Thread #PXQ2020 or Left Hand Thread #PXQ2020L if you have…
view full answer...I reached out to my contact at Phoenix USA and the Phoenix USA Front Hub Cover w/ Pop Out - 8 on 275mm - 33mm Lug Nuts - ABS Plastic #PXQ822F you were looking at will work with your 2014 Thor Challenger with 8 lug 22.5" wheels as long as your…
view full answer...The hub covers that I have are only available in chrome ABS finish. The Quick Trim Chrome Finish Trailer Hub Cover 6 on 5-1/2, part #QT655C, is a cover that will fit a 6 on 5-1/2 inch bolt pattern wheel. The Quick Trim Chrome Finish Trailer Hub Cover…
view full answer...Even though most threads on bolts use right-handed bolts/nuts, some special scenarios warrant a left-handed thread. When wheel accessories like the Phoenix USA Rear Wheel Center Cap - 8-1/4" Hub Diameter - Center Hole Mount - Left Thread…
view full answer...I recommend going with the Timbren Suspension Enhancement System #TFRSDJ for your 2024 Ford F-450 Super Duty because it's designed better for pickup truck-type applications. The other Timbren kit #TFRTT350J is designed more for Severe Service…
view full answer...The Phoenix USA Rear Hub Cover #PXQ822R is held on by the threaded lug nut covers. We do have the Phoenix USA Rear Under-Lug Hub Cover #PXCO33SS that will allow you to secure it under the lug nuts. With most applications you will only have to remove…
view full answer...
What our customers are saying:
"This site is top notch: Great prices, great service. Highly recommended."