Videos
for ComeUp
Help Articles
for ComeUp
Expert Answers
for ComeUp
It is plastic. The ComeUp UW-5000si Trailer Winch item #CU645010 is a light duty winch so it's housing and base are made of plastic. I attached a picture below that will show you the base. I've also linked an installation video that will go…
view full answer...I called Bulldog Winch for the dimensions of the winch mouting plate kit, part #BDW20009. It fits a Jeep CJ from 1976 to 1986 or YJ from 1987 to 1995. The total length is about 28 inches, width 8 inches, and height 3-1/2 inches. The winch mouting…
view full answer...We have the perfect winch for you to pull your 3,000 lb car onto your trailer, the ComeUp UW-5000si Trailer Winch #CU645010. This 5,000 lb static load/50,000 lb rolling load winch has a wireless remote (which is also waterproof) that will let you…
view full answer...If your Rough Country winch uses the same 3 pin plug then yes the ComeUp Wireless Remote Control #CU880609 will work with fine. This is a wireless remote that uses a 3 pin connection, and will work up to 90' away
view full answer...We do have a nice selection of bungee cords and tie-down straps, if you already have a spot where you can anchor them. Personally, I prefer tie-down straps with ratchets. For example, the Erickson Ratchet Tie-Down Straps w Flat Hooks - 2" x…
view full answer...The Comeup Winch part #CU645010 and the Superwinch S5500 Trailer Winch #SW1455201 with the wireless remote #SW43GR are both pretty similarly specced once you have the wireless remote for the Superwinch. Based on that I would go with the ComeUp since…
view full answer...The Everchill Wine Cooler #324-000115 is more or less a standard wine cooler but it was made with the tighter space limitations that RVs have in mind as well as has a bit of a stronger magnet in the door which helps keep it closed.
view full answer...The mounting bolt pattern for the ComeUp Winch part #CU644512 that you referenced is two mounting holes that are separated by 3-11/16 inches.
view full answer...The Bulldog Winch Receiver Mount Kit #BDW20155 has the standard 10 x 4.5" mounting bolt pattern which will match up exactly with your Badland Apex 12000. As for the wiring, you will need to route the wire from your 4Runner battery and mount the…
view full answer...I went out to the warehouse and pulled a CURT Trailer Hitch Electric Winch Mount Plate, #C31010, to measure it. From the back of the mounting plate to the center of the nearest hitch pin hole, it is 4-1/4 inches. -The distance to the center hole is…
view full answer...Yes, the Warn M8000 Winch uses a 10" x 4-1/2" mounting pattern which the Curt Trailer Hitch Electric Winch Mount Plate part #C31010 will accept so they can be used together just fine. The 10" x 4-1/2" mounting pattern is an…
view full answer...Yes, we do have the wireless remote for the Bulldog Winch Trailer Winch #BDW66FR. The Wireless Remote Kit for Bulldog Winch Heavy-Duty Trailer Winches #BDW54QB will replace your current remote and allow you to operate the winch from up to 65'…
view full answer...
What our customers are saying:
"Great service & thanks for the follow up."