Videos
for InfiniteRule
Help Articles
for InfiniteRule
Expert Answers
for InfiniteRule
Hey Bill, so yeah we worded the fit of the lock you mentioned odd but it's not going to fit a 3 inch setup but we can help as we have the Blaylock EZ part #BLTL-60-40D that was designed for 3 inch diameter setups like you have.
view full answer...We haven't had any issues with the InfiniteRule Locking Pins part #IR57RR coming loose so I wouldn't anticipate that being a problem at all. When these are in the locked position they actually can't thread on or off.
view full answer...I grew up on a farm, I totally get your dilemma. You need a set of stainless steel locking hitch pins. The best option for a channel style ball mount is going to be the InfiniteRule Locking Pins item #34061674-D. This heavy-duty locking pin set has…
view full answer...In order to wire your cargo trailer for both 12 volt DC and 110 volt AC power you would need to install a AC/DC distribution panel and power converter which we currently do not offer. You would then wire the 12 volt power to the converter along with…
view full answer...The distance between the 1/4" pin and the main lock body on the #IR98FR is 11/16". The length of the sides is 2-1/16".I have attached a diagram below showing all of the measurements for your reference.
view full answer...The InfiniteRule Lock for Demco eZ-Latch #IR66FR will fit 2" and 2-5/16" couplers. This lock has an internal length of 2-15/16" to fit the pin hole on your coupler. I have linked an image below showing it on a 2-5/16" coupler in…
view full answer...I recommend using the Curt Lock Set #C23556 for your Curt Adjustable 2-Ball Mount #C99NR. This comes with a lock for the hitch receiver and one for the ball mount platform. Even though your platform uses 2 pins, only 1 locking pin is needed to secure…
view full answer...There is one hitch lock for a 2-1/2 inch hitch that stands above the rest to protect the Gen-Y Phantom X Adjustable 2-Ball Mount - 2-1/2" Hitch #GY95XR. The lock I highly recommend to keep your ball mount safe is the InfiniteRule Hitch Lock for…
view full answer...There is a way for you to not only lock the B&W Tow & Stow 3-Ball Mount - Compatible with GM MultiPro Tailgate - 2.5" Hitch - 148K #BWTS20067BMP to your 2-1/2 inch trailer hitch, but also the ball platform to the mount, and the hitch…
view full answer...If you just wanted to replace the 3 pins on the B&W Tow & Stow ball mount like part #BWTS20049B , you'd use the part #IR57FR. If you also wanted a keyed alike receiver lock to secure the whole shebang into the hitch receiver, we offer a…
view full answer...The Gen-Y Hitch Shock Absorbing 5th Wheel to Gooseneck Pin Box #GY38FR is not going to allow for any additional turning clearance than the 5th wheel king pin with a fixed point hitch. We have offset gooseneck ball options depending on what type of…
view full answer...Assuming you use appropriately sized grade 8 bolts for the Curt Channel Style Adjustable Ball Mount #C45900 there isn't a particular reason you couldn't them and some lock nuts in place of the included pins and clips. Even though the Grade 8…
view full answer...
What our customers are saying:
"You folks are fast. Thank you very much."