Will etrailer.com Hub AKIHUB-545-35-K fit Trailer Hub with Bearing Spindle Diameter 1.06 and 1.375
Question:
All of the diameters match my axle. The overall length is what concerns me. The hub I am replacing is 4-1/8inch over all length. The 1.720 diameter on the axle is 5/8inch long. The 1.375 diameter on the axle measures 2-1/2inch long, the 1.062inch diameter is about 5/8inch long and then the thread is 7/8inch long. Does your hub work with an axle this size/length? I am changing hubs b/c I got a great deal on tires and rims that are 5 bolt 4-1/2inch circle.
asked by: Doug B
Expert Reply:
The spindle dimensions you listed are totally compatible with the Trailer Hub part # AKIHUB-545-35-K that you referenced. The overall length of the spindle would not be an issue either.
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Shop: Kenda K353 Bias Trailer Tire - 4.80-12 - Load Range C
- Shop: Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2 - Pre-Greased
- Video: etrailer Trailer Idler Hub Assembly Installation
- Video: Dexter Axle Trailer Hubs and Drums - Hub - 84545BX Review
- Video: etrailer Trailer Hubs and Drums - Hub - AKIHUB-545-35-K Review
- Video: Review of TruRyde Trailer Spindles - EZ Lube Spindle - TRU74FR
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU47FR
- Video: Review of TruRyde Trailer Spindles - Standard Spindle - TRU97FR
- Shop: #42 E-Z Lube 4" Drop Spindle w/ Flange for 5.2K to 7K Trailer Axles - 3" Diameter
- Shop: Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Shop: #84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Q&A: Highest Weight Rated Trailer Hubs that have Bolt Pattern of 5 on 4-1/2 inches
- Q&A: Is the Grease Seal Seat Larger Than the Bar Stock on the Square #84 Spindle TRU47FR
- Q&A: Difference Between EZ Lube Compatible Hubs and Regular Hubs
- Q&A: Determining Which Hub Replaces Dexter 8-243 Clamp On Wheel Hub
- Q&A: Will Trailer Idler Hub Assembly for 3,500-lb Axles AKIHUB-545-35-PG-K Fit Lippert Axles
- Q&A: Correct 5-Lug Hub for Square #84 Spindle TRU47FR
- Q&A: Distance From End of TruRyde #84 Spindle Stub to the Back of an Installed Hub
- Video: Review of Kenda Trailer Tires and Wheels - Tire Only - AM10062
- Search Results: dexter 8 248
- Search Results: 5 on 4.75 rim
- Search Results: 44649
- Shop: Trailer Hitch
- Article: Trailer Tire Sizing
- Search Results: 25580
- Shop: Trailer Wiring
- Article: Trailer Wiring Diagrams
- Search Results: dust cap